NEPOC Meet / Install Day

[Astral]

Nah turns out I can't do anything Sunday, the easter lunch/dinner BS too hard to work around.

Hey can I come up a day early, on Friday....we can do my brake calipers and yours if you are still doing it. And that way we will be ready for when they get there. I have school off on friday. I have to get my check and then get new front tires and tehn I could make my way up. Well have to get some booze if I come up early. Send me a PM if thats cool.

A day early? I thought the install day was Sunday... Dunno if Gbourdon's around/available those days... At any rate, it's looking not so good right now (4hrs driving time, 3hrs working time = 7hrs out of a day... will be hard to pull this upcoming weekend)

 

[Gbourdon]

The install day is on saturday. If you can make it up then.

 

[bazooka joe]

The install day is on saturday. If you can make it up then.

i'm not going to be able to make it...i'm away the next 3 weekends and i got stuff to do around the house...pick up after the nasty winter.:mad: ..have a good time without me!!

 

[NeverSober]

So who all is going? And gbourdon, what is your address and telephoen number, just in case I get lost. And I am not quite sure on when I can get there by. I dont have school but I am getting new tires on friday. I might be abnle to get the done thursday. I think I might have to wait for my check though, which will be 3 oclock. I think I am just going to go without it though. Let me knwo what time you want me to come up friday.

Chris

 

[Kansei]

weee i can't wait... doin the oil change thing sometime this week and getting a screw that is embedded in the front tire removed so that i'm ready for the 3+ hour journey... if only I could find someone to go with me so I can be sure I won't fall asleep at the wheel on the way back. My TWM still hasn't come in, and with the crazy B&M sale going on I think I may return it.. Either way I'll come up for the meet, should be fun... If anyone can think of something for me to bring I'll bring it.. i'm bringing some retaining ring pliars although I'm sure you all have those anyways.

EDIT: I gotta remember to put my front plate on so I don't get pulled over it looked so nice without a front plate even with the holes. I've seen people with some sort of mount to put it inside on the dash, with suction cups holding it to the windshield, but I still doubt it's legal. I'll see how it looks with zipties on the front before I put the big bracket on though.

 

[Gbourdon]

April 10th in NH

1. Gbourdon
2. Spicymchaggis
3. xxMSPxx
4. Tyusha ?
5. Myndfi3ld
6. 1st MP3 in NH
7. Astral ?

 

[1sty]

weee i can't wait... doin the oil change thing sometime this week and getting a screw that is embedded in the front tire removed so that i'm ready for the 3+ hour journey... if only I could find someone to go with me so I can be sure I won't fall asleep at the wheel on the way back. My TWM still hasn't come in, and with the crazy B&M sale going on I think I may return it.. Either way I'll come up for the meet, should be fun... If anyone can think of something for me to bring I'll bring it.. i'm bringing some retaining ring pliars although I'm sure you all have those anyways.

EDIT: I gotta remember to put my front plate on so I don't get pulled over it looked so nice without a front plate even with the holes. I've seen people with some sort of mount to put it inside on the dash, with suction cups holding it to the windshield, but I still doubt it's legal. I'll see how it looks with zipties on the front before I put the big bracket on though.

YOu can meet up with me at the NH border if you like.

 

[Kansei]

YOu can meet up with me at the NH border if you like.

I'll be fine on the way up there, I drove all the way from my house to Rochester, NY (6 hours) without a problem.

I get tired after like 4 hours or so, but then I am nearing my destination so the excitement overrides the exhaustion.

EDIT: gasp there was a spelling mistake

 

[Gbourdon]

If anyone needs directions let me know. Also if you get lost call me!
603 735-6194 - Home
603 209-5158 - Cell

My cell doesnt come in too good at my house so if I don't answer call my home phone.

 

[Astral]

I'm thinking of installing some Dynamat-like stuff as well.. anyone have a heat gun?

1st MP3 in NH--you Dynamatted your MP3, didn't you? Maybe I could snag some advice from you.

1st MP3, BTW, a friend of mine just purchased an STI, with no stereo. He wants to add in audio soon, so I have been helping him a little. He'll probably have it done by a shop (he wants it done "right" the first time), but I already prevented him from getting an overpriced mismatched-ohms setup (all prices MSRP, the planned config had a 2-ohm sub into a non-2-ohm-stable amp).

 

[SpicyMchaggis]

alright bud, i'll see you and chris tomorrow..what time should i come up?

 

[Gbourdon]

spicymchaggis - If you want to meet on 91 we could do that. Theres a park and ride after exit 6 in Vermont. Its right around zip code 05101. Chris was leaving his house around 11:00 I think. So I was going to meet him at the park and ride at 1:00. Unless you want to come up earlier than that.

What time do you work on saturday?

 

[SpicyMchaggis]

saturday i work 9-5, keep in mind it takes me like 3 hours to get up there.

 

[Gbourdon]

Damn man that's early. You should come up early on friday then so we can get those springs done. You never know how long they'll take in case there is an issue.

 

[Gbourdon]

saturday i work 9-5, keep in mind it takes me like 3 hours to get up there.

Hey, I'll call you tonight, around like 7 ish probably. That was your cell phone you called me with before right?

 

[NeverSober]

So Greg wehre do you want to meet? I am probablly going to leave a little bit earlier then 11. My cell is 413 265 5595 call me tonite so we can work this all out. Just got my new tires and they arent bad. Does anyone have an extra wheel lock set or even just lug nuts they will sell me? I am ridin up on 4 because TFT didn't have any that would fit, and I lost my wheel lock key. Bring them wiht you if you do. Greg we have to take a trip to autozone or somethign when I get there, I have a few things I need to buy.


Chris

 

[Gbourdon]

For chris and kyle on Friday

So Greg wehre do you want to meet? I am probablly going to leave a little bit earlier then 11. My cell is 413 265 5595 call me tonite so we can work this all out. Just got my new tires and they arent bad. Does anyone have an extra wheel lock set or even just lug nuts they will sell me? I am ridin up on 4 because TFT didn't have any that would fit, and I lost my wheel lock key. Bring them wiht you if you do. Greg we have to take a trip to autozone or somethign when I get there, I have a few things I need to buy.


Chris

Earlier is better.

That is no problem, you can get lugs at autozone but you should be able to get them pretty much anywhere, you could scoop some up tonight down there.

I need to talk with kyle too. That way we can figure things out. He wants to come up early too. I'll call you guys tonight but not until like 7 oclock.

I probably will not be on the forum anymore today either so if you need me be sure to call my cell phone.

 

[Gbourdon]

For Chris and Kyle on Friday

If you want to meet on 91 we could do that. Theres a park and ride after exit 6 in Vermont. Its right around zip code 05101. Chris was leaving his house around 11:00 I think. So I was going to meet him at the park and ride at 1:00. Unless you want to come up earlier than that.

What time do you work on saturday?

If we could meet at that park and ride around 12:00 we could be at my house by around 1:00. We are going to need jackstands for your car chris, if you are painting calipers.

We can do kyles springs one at a time. and use some huge blocks of wood that I have, it's how i did mine.

 

[Kansei]

so meeting after exit 7 vermont at 1 is still on? i'd have to leave at... like 10 or a little earlier, not a problem. I could leave at 4am if i had to i love early morning driving

 

[Gbourdon]

(confused) Spicymchaggis and xxMSPxx are coming up tomorrow [friday] and I was going to meet them at that exit since I am going to be in the area.

When everyone else comes up on saturday it would probably be easier to just head straight to my house since we will already be there in the morning.