MS3 guys - want a gauge pod??
- Thread starter CasopoliS
- Start date
Just added more product pictures that can be found at:
www.cubbypod.com
click the "Installed pictures" link under each product type.
Direct link to pages:
http://www.casopolis.com/products/CP1.htm
http://www.casopolis.com/products/CP2.htm
www.cubbypod.com
click the "Installed pictures" link under each product type.
Direct link to pages:
http://www.casopolis.com/products/CP1.htm
http://www.casopolis.com/products/CP2.htm
Mazda3OnSpeed
Member
- :
- MazdaSpeed 3
this is where i had my boost =) but i took it off =\
A-pillar boost gauge mount
Does anyone have a link or know of a vendor that makes a nice a-pillar mount for single small gauges? I was thinking of mounting a stewart warner boost gauge or similar on the lower a-pillar near the dash pointed towards the driver. Preferably a single mount that fits the MS3 and either matches or can be painted to match the existing interior. If anyone already has a set up like this please post an image for all of us to see. I looking into getting a 2" gauge that has similar backlighting and goes through needle momement dance check during initial powerup. Any suggestions on gauges to look at? mechanical, electrical, digital? Thanks.(usa)
Does anyone have a link or know of a vendor that makes a nice a-pillar mount for single small gauges? I was thinking of mounting a stewart warner boost gauge or similar on the lower a-pillar near the dash pointed towards the driver. Preferably a single mount that fits the MS3 and either matches or can be painted to match the existing interior. If anyone already has a set up like this please post an image for all of us to see. I looking into getting a 2" gauge that has similar backlighting and goes through needle momement dance check during initial powerup. Any suggestions on gauges to look at? mechanical, electrical, digital? Thanks.(usa)
www.prosportgauges.com
if you get enough people interested, I can extend my discount to this forum.
They are great gauges for the price. They have been field tested and perform just as good if not better than Defi and others. These tests were performed by an independent company.
I will look into Mazdas once I find some local guys.
if you get enough people interested, I can extend my discount to this forum.
They are great gauges for the price. They have been field tested and perform just as good if not better than Defi and others. These tests were performed by an independent company.
I will look into Mazdas once I find some local guys.
does that go over the steering wheel? i want one for around the wheel because i saw a nice one for three gauges and it goes on the center but i think u need to cut into the dash to run wires...Wes said:Have you ever tried to make one from the stock gauge cluster area? You know, kinda like so:
I also like the single pod idea on far left vent.
There really isn't any good spots on the center console... it's all too integrated.
Gauge pod mounts
Count me in for something nice on the left side of the instrument cluster. The Pro-Sport gauge looks very nice and will go with them for the business. I'm interested in the single boost gauge mount but really would like to see it on the A-Pillar not the vent. Don't want to lose any functionality doing this mod. Thanks.
CasopoliS said:
Count me in for something nice on the left side of the instrument cluster. The Pro-Sport gauge looks very nice and will go with them for the business. I'm interested in the single boost gauge mount but really would like to see it on the A-Pillar not the vent. Don't want to lose any functionality doing this mod. Thanks.
Craighjr said:
The material is a rigid thermoplastic. I would love to see a picture of the console as it sits in the car, then possibly obtain the console and design something for it. The design and prototyping phase would not take that long.
Anyone have pictures of this?
http://www.mazdas247.com/forum/showthread.php?t=123660693&page=4
check this thread out...page 3 its a badass gauge pod that snaps in just like the center console piece with the air vents and stuff...i asked the guy how much and he told me around 200....buying center piece from a junk yard and getting a 30 dollar gauge pod just like that would be better imo but thats a very nice pod....
check this thread out...page 3 its a badass gauge pod that snaps in just like the center console piece with the air vents and stuff...i asked the guy how much and he told me around 200....buying center piece from a junk yard and getting a 30 dollar gauge pod just like that would be better imo but thats a very nice pod....
New Posts and Comments
- Article
- Article
