- :
- 2001 Mazda MP3
*Mazda of the Month 2.0* Enter now for February!
- Thread starter Antoine
- Start date
- Status
safety first then teamwork (Pineapple express) lol
1
13984
Ah what the hell, I better give it a shot before my wife makes me sell it.
SLA
Sean
2002 Protege DX
Engine:
HiBoost Turbo Kit 9psi
Corksport Throttle Body
Corksport Power Series Exhaust
DG Motorsports CF Engine Cover
Valve cover and IC pipes painted Black
Colormatched HKS BOV
Drivetrain:
ACT Street/Strip Clutch
AWR Front/Rear MotorMounts
CorkSport SS clutch line
Suspension/Brakes:
Tein S-tech Springs
Tokico Blue Struts
5 Lug / Rear Disc Conversion
Protege Garage BBK w/ Slotted Rotors
Colormatched Brake calipers
SS Braided Brakelines
MSP Strut Tower Brace
Exterior:
MP3 Conversion
Color Match Grill
DIY Blackout Headlights
18x7 Eneki RP07's painted black w/ color matched lip
Nitto Neogen 215/35
Sylvania Silver star Headlights / Foglights
Interior:
Grey/Charcoal Grey Special Edition Leather seats w/ matching Leather Door panels
Sparco Shifter Knob
Brushed Aluminum Pedals
Brushed Aluminum Trim Around Handles,A/C vents, Center Console, Radio surround, and Instrument cluster
Mazdaspeed Floormats
Mazdaspeed Instrument Cluster
Mazdaspeed a/c controls to match orange lights on instrument cluster
Triple Pod A pillar
AEM Wideband o2 w/gauge
Autometer Boostguage
Autometer Pyrometer
Alpine CDA-9827
Audiovox DVD player
Audiovox LCD screens in visors
JL Audio 8w7
JL Audio e1800D monoblock amp
Haltech F10x EMS
SLA
Sean
2002 Protege DX
Engine:
HiBoost Turbo Kit 9psi
Corksport Throttle Body
Corksport Power Series Exhaust
DG Motorsports CF Engine Cover
Valve cover and IC pipes painted Black
Colormatched HKS BOV
Drivetrain:
ACT Street/Strip Clutch
AWR Front/Rear MotorMounts
CorkSport SS clutch line
Suspension/Brakes:
Tein S-tech Springs
Tokico Blue Struts
5 Lug / Rear Disc Conversion
Protege Garage BBK w/ Slotted Rotors
Colormatched Brake calipers
SS Braided Brakelines
MSP Strut Tower Brace
Exterior:
MP3 Conversion
Color Match Grill
DIY Blackout Headlights
18x7 Eneki RP07's painted black w/ color matched lip
Nitto Neogen 215/35
Sylvania Silver star Headlights / Foglights
Interior:
Grey/Charcoal Grey Special Edition Leather seats w/ matching Leather Door panels
Sparco Shifter Knob
Brushed Aluminum Pedals
Brushed Aluminum Trim Around Handles,A/C vents, Center Console, Radio surround, and Instrument cluster
Mazdaspeed Floormats
Mazdaspeed Instrument Cluster
Mazdaspeed a/c controls to match orange lights on instrument cluster
Triple Pod A pillar
AEM Wideband o2 w/gauge
Autometer Boostguage
Autometer Pyrometer
Alpine CDA-9827
Audiovox DVD player
Audiovox LCD screens in visors
JL Audio 8w7
JL Audio e1800D monoblock amp
Haltech F10x EMS
Last edited by a moderator:
1
13984
Just Bought a new car.... She for some reason seems to believe 1 car is enough for me *sighs* Women can't live with them.............
hey guys thanks for the compliments. I thought I would try with something a little different. Her blood runs Mazda Red, so I figured I would have a small chance... 
this car is not normally supported in the aftermarket, and quite a few parts are one offs. It's go, and show as an afterthought. She is rough around the edges in many places as I originally planned on her being a time attack car. Most parts are designed to be easily serviceable thusly sacrificing asthetics in the process. I've been re-engineering her for the last 11 years now (I'm 31years old). I've worked on everything from the chasey to the brakes to the powerplant/drivetrain, to the interior, and even the exterior aerodynamics. Its literally completely custom, all works well together, and most is easily serviceable in a track like environment. I drive this car year round, even through the winters.
this car is not normally supported in the aftermarket, and quite a few parts are one offs. It's go, and show as an afterthought. She is rough around the edges in many places as I originally planned on her being a time attack car. Most parts are designed to be easily serviceable thusly sacrificing asthetics in the process. I've been re-engineering her for the last 11 years now (I'm 31years old). I've worked on everything from the chasey to the brakes to the powerplant/drivetrain, to the interior, and even the exterior aerodynamics. Its literally completely custom, all works well together, and most is easily serviceable in a track like environment. I drive this car year round, even through the winters.
Last edited:
haha yes the legend is real. There is a thread on another fourm called "Roll Call 4wd Protege". Its pretty cool...so far across canada and us 28 of us have spoke up.
Bolinoga
Dejan CEHULIĆ, Croatia
Mazda Premacy (2001)
Performance Mods:
none
Engine Mods:
clutch set original by Mazda - twice
rubber belt set original by Mazda - twice
front suspension set produced by KIA Korea
Exterior Mods:
none
Interior Mods:
in/out temperature showing device
by unknown china producer
Stereo Mods:
SONY radio with RDS
connected with built in speakers
Awards Won:
none
Recognition:
none
Dejan CEHULIĆ, Croatia
Mazda Premacy (2001)
Performance Mods:
none
Engine Mods:
clutch set original by Mazda - twice
rubber belt set original by Mazda - twice
front suspension set produced by KIA Korea
Exterior Mods:
none
Interior Mods:
in/out temperature showing device
by unknown china producer
Stereo Mods:
SONY radio with RDS
connected with built in speakers
Awards Won:
none
Recognition:
none
Last edited:
Mazda Carnage
Member
- :
- Mazda 88MX6 GT, 89MX6 GT, 89-626 LX/GT, 90 B2200 (GT)
Mazda Carnage
Danny
1989 Mazda MX6 GT
All blue parts but valve cover, fuel rail, front and rear housing are coated in Glow in the Dark Aqua additive with the final clear and so are the upper charge pipes. So most of the engine Glows in the dark.
Mods include:
Suspension and steering and handling:
-Eibach springs.
-KYB front struts, (Salvaged) tokico blue rear.
-Rear mazda strut tower bar, rear mazda trailling axel bar
-Front Vibrant strut tower bar.
-AWR rear trailling links.
-Adcco oversized sway bars, front and rear with polly bushings.
-Adcco rear link kits, Oversized custom front link kits with adcco bushings.
-Manual rack and pinion (Power steering and AC delete).
-Powder coated lower control arms with moog ball joints.
-Over sized Spindles with 17mm (M-12) bolts holding the ball joints, Powder coated.
-Rebuild and powder coated rear callipers .
-New rear disks and pads.
-Rebuilt and powdercoated front calipers.
-Cross drilled front rotors and new pads.
-Brake disk faces as wheel spacers.
-NZW powder coated 16x8" rims.
-225/50r16 Falcon FK-451 tires.
Interior Mods:
-Grant steering wheel and hub adapter.
-Red billet powder coated hand brake handle.
-Red leather/chrome shift knob.
-Leather shift boot.
-Dash mount camera bracket.
-Floor mount wide band bracket.
-Panassonic Mp3 player, upgraded front and rear speakers.
-Power steering and adjustable suspension control units removed.
-Autometer gauges installed in vents.
-Red metal clutch and brake pedal covers.
-Larger rear view mirror.
Exterior mods:
-HID conversion headlight bulbs and kit installed .
-Bright white front running lights and fog lights.
-Red license plate lights and all the peanut bulbs on the car are blue Piaa
-626 front hood trim painted black.
-New wiper blades.
-Bumper camera bracket.
-1 extra freeway horn.
Transmission:
-Rebuilt transmission with welded diff pin.
-Candy blue powder coating.
-Valvolene synthethic gear oil and molly slip.
-Lightened flywheel.
-ACT stage 4 clutch and extreme pressure plate converted to bulley Stage four with needle bearing pressure plate.
-Oversized CV-joints with 36mm tips.
-Pace setter short throw shifter with new bushings.
-Front and rear AWR transmission mounts (drilled out to smooth vibrations).
-Rubber clutch flex hose deleted.
Engine, performance and fuel mods:
-Adam chip.
-MSD blaster coil.
-MSD 6al ignition with tach adapter.
-Taylor 8mm wires.
-NGK colder plugs gapped to .35.
-Unorthodox Racing aluminum underdrive pulley.
-Ported (test) head.
-Ported exhaust manifold with T3 flange.
-Saab T3 turbo.
-Modified MX6 wastegate actuator w/5 TB springs, holding 15+ lbs.
In dash manual Forge boost controller (running 17 to 21lbs).
-Autometer Boost gauge and D-pic.
-Innovate Motorsport LM1 wide band unit.
-2.5" intercooler pipes and couplers w/Tbolt clamps.
-Treadstone TRV 125 front mount intercooler.
-Custom bumper vents for intercooler.
-HKS super sequential BOV.
-Silicon vacuum lines.
-New oil pan, pump, gaskets, head gasket.
-Powder coated valve cover, front housing and bracket.
-Powder coated engine brackets (all).
-Ported intake manifold, smoothed on the outside and powder coated.
-Ported Dynamic chamber, smoothed on the outside and powder coated.
-Custom cut Throttle Body with larger primary flap and powder coated.
-Custom made catch can and battery tie down.
-Powded coated hard metal coolant lines.
-13" 14blade cooling fan with modified shroud.
-SDS EIC indash injector controller.
-SDS extra injectors before Throttle body X2 -640cc each.
-Ported and powder coated fuel rail.
-91 GT injectors and clips.
-Walbro 255lph pump.
-2.6l Isuzu Fuel filter.
-Adjustable fuel pressure regulator.
-Saab O2 housing and downpipe.
-1 7/8" manual exhaust dump.
-2.5" exhaust with flexpipe and flanges.
-2.5" x 40" thrush resonator.
-2.5" Magnaflow high flow cat.
-2.5" Magnaflow muffler.
---------------------------------------------------------------------
Ready to install:
-T3 5 bolt O2 housing flange with 2.5" opening (Cut for external waste-gate).
-2.5" custom downpipe.
-Tial 38mm External Waste Gate with 1 Bar spring.
-2.5" QTP exhaust cut out.
-2.5" QTP electric exhaust cut out actuator with in dash switch.
-2.5" QTP exhaust cut out tip.
Danny
1989 Mazda MX6 GT
All blue parts but valve cover, fuel rail, front and rear housing are coated in Glow in the Dark Aqua additive with the final clear and so are the upper charge pipes. So most of the engine Glows in the dark.
Mods include:
Suspension and steering and handling:
-Eibach springs.
-KYB front struts, (Salvaged) tokico blue rear.
-Rear mazda strut tower bar, rear mazda trailling axel bar
-Front Vibrant strut tower bar.
-AWR rear trailling links.
-Adcco oversized sway bars, front and rear with polly bushings.
-Adcco rear link kits, Oversized custom front link kits with adcco bushings.
-Manual rack and pinion (Power steering and AC delete).
-Powder coated lower control arms with moog ball joints.
-Over sized Spindles with 17mm (M-12) bolts holding the ball joints, Powder coated.
-Rebuild and powder coated rear callipers .
-New rear disks and pads.
-Rebuilt and powdercoated front calipers.
-Cross drilled front rotors and new pads.
-Brake disk faces as wheel spacers.
-NZW powder coated 16x8" rims.
-225/50r16 Falcon FK-451 tires.
Interior Mods:
-Grant steering wheel and hub adapter.
-Red billet powder coated hand brake handle.
-Red leather/chrome shift knob.
-Leather shift boot.
-Dash mount camera bracket.
-Floor mount wide band bracket.
-Panassonic Mp3 player, upgraded front and rear speakers.
-Power steering and adjustable suspension control units removed.
-Autometer gauges installed in vents.
-Red metal clutch and brake pedal covers.
-Larger rear view mirror.
Exterior mods:
-HID conversion headlight bulbs and kit installed .
-Bright white front running lights and fog lights.
-Red license plate lights and all the peanut bulbs on the car are blue Piaa
-626 front hood trim painted black.
-New wiper blades.
-Bumper camera bracket.
-1 extra freeway horn.
Transmission:
-Rebuilt transmission with welded diff pin.
-Candy blue powder coating.
-Valvolene synthethic gear oil and molly slip.
-Lightened flywheel.
-ACT stage 4 clutch and extreme pressure plate converted to bulley Stage four with needle bearing pressure plate.
-Oversized CV-joints with 36mm tips.
-Pace setter short throw shifter with new bushings.
-Front and rear AWR transmission mounts (drilled out to smooth vibrations).
-Rubber clutch flex hose deleted.
Engine, performance and fuel mods:
-Adam chip.
-MSD blaster coil.
-MSD 6al ignition with tach adapter.
-Taylor 8mm wires.
-NGK colder plugs gapped to .35.
-Unorthodox Racing aluminum underdrive pulley.
-Ported (test) head.
-Ported exhaust manifold with T3 flange.
-Saab T3 turbo.
-Modified MX6 wastegate actuator w/5 TB springs, holding 15+ lbs.
In dash manual Forge boost controller (running 17 to 21lbs).
-Autometer Boost gauge and D-pic.
-Innovate Motorsport LM1 wide band unit.
-2.5" intercooler pipes and couplers w/Tbolt clamps.
-Treadstone TRV 125 front mount intercooler.
-Custom bumper vents for intercooler.
-HKS super sequential BOV.
-Silicon vacuum lines.
-New oil pan, pump, gaskets, head gasket.
-Powder coated valve cover, front housing and bracket.
-Powder coated engine brackets (all).
-Ported intake manifold, smoothed on the outside and powder coated.
-Ported Dynamic chamber, smoothed on the outside and powder coated.
-Custom cut Throttle Body with larger primary flap and powder coated.
-Custom made catch can and battery tie down.
-Powded coated hard metal coolant lines.
-13" 14blade cooling fan with modified shroud.
-SDS EIC indash injector controller.
-SDS extra injectors before Throttle body X2 -640cc each.
-Ported and powder coated fuel rail.
-91 GT injectors and clips.
-Walbro 255lph pump.
-2.6l Isuzu Fuel filter.
-Adjustable fuel pressure regulator.
-Saab O2 housing and downpipe.
-1 7/8" manual exhaust dump.
-2.5" exhaust with flexpipe and flanges.
-2.5" x 40" thrush resonator.
-2.5" Magnaflow high flow cat.
-2.5" Magnaflow muffler.
---------------------------------------------------------------------
Ready to install:
-T3 5 bolt O2 housing flange with 2.5" opening (Cut for external waste-gate).
-2.5" custom downpipe.
-Tial 38mm External Waste Gate with 1 Bar spring.
-2.5" QTP exhaust cut out.
-2.5" QTP electric exhaust cut out actuator with in dash switch.
-2.5" QTP exhaust cut out tip.
blueprotegelx
iZoom
- :
- 2003 Mazda Protege LX-T
everyone came out to play this month! i like the first miata, the probe, and SLA's msp...
- Status
