mazda 323 wagon BF - 343whp

GTXWGN

Member
mazda 323 wagon BF - 343whp - NEW PICS P2

i have a bpt motor , gtr rods, ported head , wiseco pistons. gt3071 turbo and 23psi.

343hp at the fronts on 23psi doing a few more mods now to eliminate some bottlenecks....

car so far has done 12.2@127

this was on dyno dynamics dyno

rimg0647xf1.jpg
 
Last edited:
Yes...pics of the car!. I have a BF wagon and dream of doing a BPT swap in it some day. The B6 is getting a little weak. I also thought about doing the 2.2L turbo swap from the mx-6/626. They are a little cheaper and easier to get than a BPT, but not as much potential.
 
Holy cow look at that trap speed!!! Let's see some pics and/or video please. (rockon)
 
OH...

he was probably just looking at the dyno chart and didnt see the whole post
 
hi guys sorry for the delay. here are pics

i have since destroyed the gearbox completely and have now mad an adapter plate and have fitted a mr2 4agze gearbox onto it with custom clutch etc... its not finished yet...and i also found one of the gtr rods was bent a little aswell so im getting the belfab/cat rods to chuck in now aswell.im guessing if it was a dynajet dyno i would be close to 450-500hp at the motor and thats prolly the limit of gtr rods

garage1bt6.jpg

garage2pi9.jpg

garage3sd7.jpg

garage4ac0.jpg
 
Last edited:
What bumpers are on the car? That is the exact same wagon I have. I would love to talk to you about fabrication to fit the BP motor. I may PM you later if that is OK.
 
i made the front bar myself and the rear is a NZ/Japanese spec low drop bumper from the 1994 - 97 wagons they still made them and u can get 4wd ones etc aswell. i also grafted a sunroof in from a hatch.

u can msn me whsu2003@hotmail.com
 
4agze gearbox eh? nifty...we'll have to chat about that one mate - weakness in the G series scares me, even though i'm staying NA :P

Looking at your slip, you're dying over the 60 foot... in that slip you had it all over the other guy but he nailed you over the first half of the track - you got the 2step working? time for some slicks up front i reckon ;)

Nice times :)
 
Back