License Plate Mounting options?

[Rally Ninja]

So I got a CS FMIC and the front license plate blocks most of it. Anyone know of any good options to get it out of the way? Like something thats swings or retracts as you drive and comes back down as your idle?


Best I can find so far are these options:
http://www.mamotorworks.com/corvette.html?frame=1.43.7789

http://www.teammiata.com/TM305.htm

 

[mspHtown]

you can relocate it to the side. i think there are some pics floating around here somewhere. goodluck finding them!

 

[Rally Ninja]

I can't do that because I'm making some custom fog lights for the side vent area. It would block the fog lights if I did that.

 

[joka1]

What I Did

 

[jeg0024]

I think that miata thing is pretty cool.

 

[We Are Ninja]

Everyone I know has it suction-cupped to a corner on the inside of the windshield...

 

[mspHtown]

i would definitely not want to have a sharp metal object on the inside of the windshield. wut happens when you get in a wreck, your passenger loses his or her head...

 

[31R]

You might like this one:

http://www.sigmaautomotive.com/SeikoSangyo/brackets.php

Or you can just get this:

http://cgi.ebay.com/ebaymotors/Lice...001QQitemZ110180736215QQrdZ1QQsspagenameZWDVW

 

[alexB]

I made a bracket for mine.

I am wanting to add some small fog lights. But am not sure if the license plate will block the light out put. Im thinking no. But Im not sure.

 

[25FConv]

I did them same thing as AlexB but on the other side. I will post pic tomorrow. It has great clearance for FMIC and CATZ Yellow Fogs.

 

[1moreMPH]

inside right up on the windshield. better the passenger than me?

 

[We Are Ninja]

i would definitely not want to have a sharp metal object on the inside of the windshield. wut happens when you get in a wreck, your passenger loses his or her head...

They're, like, really strong suction cups, though...

 

[Rally Ninja]

Its illegal in this state to put it in the car bleh...

 

[03spicyspeed]

on mine i drilled two holes in the little black lip that goes around the bottom of the bumper and zip tied it there. The rule in oregon is it must be in plain view from the front of the car on the bumper and can not hang any lower then the lowest part of your wheels

 

[mspHtown]

They're, like, really strong suction cups, though...

well when the glass shatters, what will the suction cups hold onto? its your car i was just suggesting that putting it inside the windshield was probably not the safest place.

 

[kamon8404]

I like what joka did with it

 

[43975]

I have seem some guys in Chicago put them on the sun visor and flip it down when they park. I was thinking about this a few years ago on my turbo samurai project, with a FMIC. I was going to drill as many larger size holes (like quarter or half dollar size) into the front plate as possible for it to maintain it's integrity them take screen of some kind and place it behind it and paint in all the areas that I removed to give it the proper look from a distance. That way the plate could still be over the FMIC but I can still get air through.

 

[alexB]

I dont know about other states but in Missouri if you have your front plate inside the car you WILL get a ticket or atleast get hassled for it. It doesnt even say anything about it on the website. Just says alot bs and mainly in clear site. Its a risk I wont take.