Is this a good deal? custom Downpipe

[ca_deal1]

Hi everyone, I am getting a custom made downpipe(2.5") with Cat(magarflow) installed for $300
Is this a good deal?

 

[boo ya speed]

see how much you can get it for without installing it because it took me 30 min to do mine alls you need is a set of jacks but yea thats a good deal reguardless

 

[kicker22705]

im pretty sure whenever you do anything custom at a shop, they'll charge install labor. considering they will be taking your stock one off to replicate the stock design w/ bigger piping.

btw what type of pipes are you using? for that much money you should be getting stainless steel. if youre getting mild steel or aluminized, you're spending too much imo.

 

[ca_deal1]

$300 is include installation and parts

 

[Caughtbycops]

My friend got custom 3" dp to 3" exhaust piping (not including muffler and no cats) for $300 and was all mandrel bent at a recognized muffler shop around my area, just my 2cents

 

[Striker187]

is it the downpipe or a midpipe? cause if it's a downpipe, take it and run.....i'm fixing to drop about $800 for a ss downpipe/midpipe combo.....

 

[ca_deal1]

My friend got custom 3" dp to 3" exhaust piping (not including muffler and no cats) for $300 and was all mandrel bent at a recognized muffler shop around my area, just my 2cents

My friend my deal is include cat (magarflow car), with all mandrel. That's why I am asking if its a good deal.

 

[ca_deal1]

is it the downpipe or a midpipe? cause if it's a downpipe, take it and run.....i'm fixing to drop about $800 for a ss downpipe/midpipe combo.....

This is S pipe back, (downpipe, midpipe, new cat and cat back pipe all manderal pipe)

 

[Striker187]

if it's ss, it's a good price. if it's aluminized, it's about average. figure cats are $60 on ebay and 2.5" piping will be about $250 or so if it's ss and even less if it's aluminized.....then factor in labor + costs for welds and you're getting a pretty good deal.

 

[mspeed101]

is it the downpipe or a midpipe? cause if it's a downpipe, take it and run.....i'm fixing to drop about $800 for a ss downpipe/midpipe combo.....

You can get a GHL downpipe for cheaper