Installing o2 bung on CS power series exhaust

[nickbachman]

what does this install consist of? is it difficult? what do i need to do it? i dont want to cut off my o2 sensor and slap on a MIL eliminator.

 

[122 Vega]

Buy a bung, weld it on.

britt

 

[hawaiian_msp]

http://www.msprotege.com/forum/showthread.php?t=66426&page=1&pp=15&highlight=SPARK+PLUG

here you go, read up no cutting, no welding. just a $5 part from your local auto shop. nope this helps...

 

[nickbachman]

that sounds great! cant believe i missed it. so i'd still need to weld a bung onto my corksport pipe? then just screw in the anti-fouler?

 

[hawaiian_msp]

no you just use the existing bung on the "J" pipe before the cs exhaust. it has a screw in it right now. unscrew that and screw the non foulers into that, then your o2 sensor into the non-foulers then "WALA" you're done

 

[nickbachman]

sweet! i didn't know there was an existing bung with a screw in it! just confirms my suspicion that mazda is a bunch of bung-pluggers. hohoho, i slay me.

 

[UnNaturalinc]

no you just use the existing bung on the "J" pipe before the cs exhaust. it has a screw in it right now. unscrew that and screw the non foulers into that, then your o2 sensor into the non-foulers then "WALA" you're done

Correct

You don't need to add anything to the Power Series system.

The bung in the downpipe piece is where the o2 mounts on the non-MSP models.