I broke my heater, can anyone help?

[cobaltpi]

I was recently trying to take out my stereo and pulled to face plate off from around the radio and heater. I had to pull kind of hard to even see behind the panel to where it was held in place. Short story, I didn't end up taking it off, but replaced everything only to find the heater barely works, and only when I have it at the hottest setting. If I turn it slightly down it is on cold full blast, and the hot is only slightly warm. Needless to say, this winter has sucked.

I was told that there is a cable that adjusts the heat in the back of the panel, and that I might have messed up its position. Can anyone help, I would like to do it myself and not take it in if at all possible.

Thanks a lot,
John

 

[cobaltpi]

Sorry for posting in the wrong area, i am new here. i think my question was answered in a different thread.

 

[goldwing2000]

Hey, as least you realize you posted in the wrong area. (thumb)

Moved to right area.

It sounds like it may be as simple as having put the knob on wrong. Have you tried to fix it at all?

 

[cobaltpi]

Yea, i think i got it, there was a clip holding the wire in place behind the dash that had come off. It was located just behind the pin that held the wire onto the heater mech. I found another thread that had some great pics that helped fix it.

Thanks a lot.

 

[goldwing2000]

Sweet. Issue resolved, thread closed.