Hwy 9 Fun Run!

[Roywhitep5]

i was just playing gt3 with the laguna seca track and i found the spot where natey lit up. right between the tree and the tiny building by the corkscrew

 

[Natey]

I want a taco from Alice's restaurant. (stoned)

 

[jrodhotrod]

Call Joe at South Valley Auto Glass and tell him that Jared sent you for a good deal on tint. He ran a group buy on tint on the site a little while ago and does top quality work. He'll give you a great price and do a fantastic job.

http://yp.yahoo.com/py/ypMap.py?Pyt=Typ&tuid=10047321&ck=4036258405&tab=&csz=San+Jose+CA&tcat=7844607&cl=xml&source=South+valley+auto+glass,+san+jose,+ca

 

[jrodhotrod]

Hey I want to upgrade my audio system, but I dont want to spend too much money on it. Any suggestions ?

Don't buy cheap now that is going to break or you won't be happy with it in the future. Save your money, get what you really want and only spend money on it once.

 

[melicha8]

Well I deviated a little from my plan tonight and it blew up in my face. I was trying to do a wet layup with some glass tonight and I had to start from scratch luckily I decided to abort it before it was cured. What I found was when I removed all the lay up and wiped my plug off it seems the plastic that I used in the mold reacted with the polyester resin and started wrinkling. Thank god I was paying close attention or this project would have been ****** to hell. I'll stick with the original film that I was going to use.

 

[mypfizzle]

buy quality audio.. your ears will thank you. if i ever make it to a meet youll have to check out my setup -=P

 

[UberCaff]

Nate, lets go to Alices on either saturday or sunday and make a full trip out of it.

 

[Natey]

Just so you guys know...

 

[MrFoggy]

Call Joe at South Valley Auto Glass and tell him that Jared sent you for a good deal on tint. He ran a group buy on tint on the site a little while ago and does top quality work. He'll give you a great price and do a fantastic job.

http://yp.yahoo.com/py/ypMap.py?Pyt=Typ&tuid=10047321&ck=4036258405&tab=&csz=San+Jose+CA&tcat=7844607&cl=xml&source=South+valley+auto+glass,+san+jose,+ca

Thats where I got my tint done. But I didn't get in on the GB. Just called around. Talked to Joe, and stopped by the shop. He was tinting the winshield of a fully modded Viper race car. Kinda like a Touring car. I figured if he's good enough for race cas, he's good enough for me.

Quality work. No complaints. Definitely go see Joe.

 

[UberCaff]

OK, so on sunday, lets have a meet @ Alices in Woodside. Then we will go for an extended drive throughout the mountains for the day. Sunday is supposed to be super nice so lets all get together and go out and drive and s***.

 

[MrFoggy]

Can't make it Sunday. It's my friends BDay and a bunch of us are going down to Monterey to go ocean kayaking. I can't wait.

 

[Natey]

 

[mypfizzle]

natey.. p0st whorin to da fullest.. im supprised i havent seen like 30 posts by the kid today -=P
ok who else in here wants a cool nick name..
so far we have...

outlaw dan
eggynatey
camel john
naked roy

anyone else?

 

[kid prodigy]

Hey mypfizzle, I'm back to post whorin again haha j/m. I dont have really anything to talk about this time since im not up north so yea. Maybe you guys can think of a name for me haha. Peace Out

 

[jrodhotrod]

Broke Jared....

No car for me until Wednesday. Have to wait for a fan from summit racing and some radiator brackets from Mazda. Turns out the AWR radiator swap wasn't as direct as I had been led to believe it was. The radiator brackets on the MSP are different from the P5 and the radiator won't attach up to the AWR radiator, so I needed to order fans, The AC fan could attach but not the main radiator fan. So while I had to order one decided to replace both with slimline 10" high CFM fans that flow 1250 CFM.

Now I just gotta wait for everything to come in so I can get it to the shop on Wednesday morning.

 

[melicha8]

No post whoring for me. I've been in the garage all day. I almost wish I never did this projector project. You lose one thing and once you've found that another thing is missing which must be looked for. I finally did a wet lay-up today using the right interface and it's working except my resin is taking forever to cure (bang).

 

[melicha8]

Right now the glass is sitting in an 80 bathroom curing. It's coming along and I should be able to make my cuts soon(rockon) .

 

[mypfizzle]

outlaw dan
eggynatey
camel john
naked roy
broke jared

anyone else?

 

[MrFoggy]

How 'bout Accident Prone Tony?

 

[kid prodigy]

Post Whorin Kid