Got this inlet from my buddy Jarod.... I had read some minor complaints about the RPMC one and the darkstar one just did not look ideal for a SRI setup IMO. So, I ended up getting this and I could not be happier. Thing that it has vs the RMPC that I like is the rolled ends and it's cheaper 
. Let's start off with some pics.
This is for you Sacrilicious, you weld lover you
Herro Terbo
Comes with everything you need to do the install... vac hose, 3 hose clamps (only need 2, but hey 1 extra is nice just incase). First thing you gotta do is take out the battery.
Then remove old and put on new! I put the on silicone coupler first, but looking back it probably would made sense to attach it to the inlet, and then the whole thing onto the turbo second.
Nice to finally have an unrestricted intake system!
Put the battery box back on and this is how it fits... perfect
No clearance issues to be worried about that I could find. My catch can hoses were kinda in the way, I need to find a different route for them.
End result
Turbo spool sound is awesome and noticeably louder/slightly different tone...not quite as high pitched. My BPV sounded a little quieter too, but still audible and plenty loud with a FMIC and 19 psi! Butt dyno is very happy to my suprise... I don't know if it makes a difference now that I have pretty much every other breather mod, because I know guys who get inlets will only a few boltons don't seem to notice much. Either way, great inlet, looks like the best yet so far for this car. I was going to wait for Cobb's or CPE's but I'm glad I didn't, who knows how long it would be.
. Let's start off with some pics.
This is for you Sacrilicious, you weld lover you
Herro Terbo
Comes with everything you need to do the install... vac hose, 3 hose clamps (only need 2, but hey 1 extra is nice just incase). First thing you gotta do is take out the battery.
Then remove old and put on new! I put the on silicone coupler first, but looking back it probably would made sense to attach it to the inlet, and then the whole thing onto the turbo second.
Nice to finally have an unrestricted intake system!
Put the battery box back on and this is how it fits... perfect
No clearance issues to be worried about that I could find. My catch can hoses were kinda in the way, I need to find a different route for them.
End result
Turbo spool sound is awesome and noticeably louder/slightly different tone...not quite as high pitched. My BPV sounded a little quieter too, but still audible and plenty loud with a FMIC and 19 psi! Butt dyno is very happy to my suprise... I don't know if it makes a difference now that I have pretty much every other breather mod, because I know guys who get inlets will only a few boltons don't seem to notice much. Either way, great inlet, looks like the best yet so far for this car. I was going to wait for Cobb's or CPE's but I'm glad I didn't, who knows how long it would be.
