How to tune the greddy profec b spec II?

[Stormtrooper77]

Like I mentioned before, these cars are so different from stock and even more different when mods are applied. So setting the Profec will be different for everyone. It will be tough for you to find someone with a ProfecB Spec II that has theirs set to 10 and 13lbs of boost. That's just too high for someone that doesn't have a backup engine or the money to rebuild one. Your best bet is to check the library (if you haven't already) and begin from there. It will be trial and error for everyone who tries to tune one of these things. But for you, I be extra careful. Just start off small and increase from there.

 

[msp3710]

Thanks for the help.

Like I mentioned before, these cars are so different from stock and even more different when mods are applied. So setting the Profec will be different for everyone. It will be tough for you to find someone with a ProfecB Spec II that has theirs set to 10 and 13lbs of boost. That's just too high for someone that doesn't have a backup engine or the money to rebuild one. Your best bet is to check the library (if you haven't already) and begin from there. It will be trial and error for everyone who tries to tune one of these things. But for you, I be extra careful. Just start off small and increase from there.

 

[joka1]

my settings for 9 psi are set boost-0%
gain-25
set gain-35
like someone said every car is diffrent.... my minimum boost with my wastegate and this turbo...t3/t04 is 9 psi. 14 psi for me is like 15% which i smy high setting right now..... so pretty much i would say just play with it and go with what feels right

 

[msp3710]

I know someone out their has the settings. C'mon guys help me out here.

(poke)

 

[Rawyzf]

Now you're getting a little old with this.....

How about you figure it out and put it in the library for future reference.

I know someone out their has the settings. C'mon guys help me out here.

(poke)

 

[msp3710]

Whatever you say bro. This forum if full of little punks that talk alot of sh*t like yourself. If you have something to say thats not the answer to my question save it.

(flame2)

Now you're getting a little old with this.....

How about you figure it out and put it in the library for future reference.

 

[Rawyzf]

LOL...as you can see from above, I tried to help you. I don't consider myself a little punk, and this forum can help in many ways if you use it right.

How was I talking sh*t? Quit being stupid, it seems like you are just sitting in this thread waiting to jump on people who can't help you out. Time for you to let go of mommy's hand and figure some things out on your own.

Whatever you say bro. This forum if full of little punks that talk alot of sh*t like yourself. If you have something to say thats not the answer to my question save it.

(flame2)

 

[jersey_emt]

Watch the flames guys....


The settings that work on one MSP will most likely not work exactly the same on a different MSP, even if they have the exact same upgrades. You're going to have to experiment and find out for yourself.

 

[Kooldino]

^^^I'm with stoopit.

 

[msp3710]

thanks for the critizism and the help

 

[Dexter]

Jesus, christ, dude, tons of people gave you settings to try out and tons more have told you to mess with it some yourself...I'm not sure how we "aren't" helping...

 

[Rawyzf]

your welcome.

thanks for the critizism and the help

 

[goku4658]

you're terrible at life