HELP!! Wagner fmic

[NjMpSpeed]

iv done plenty of searches and still dont know wut to do. i just installed my wagner fmic setup it is not dual stage. and i have a greddy type s bov. Now the problem is everytime i rev in neutral the car goes down to almost under 100rpm and everytime im driving and i put the clutch in neutral at a stop it almost stalls again. although it never actually stalls its so annoying. what do i have to do to get my car to run smooth?! is this normal?

 

[jersey_emt]

Tighten the BOV (adjust towards 'Hard').

 

[122 Vega]

Mine does that stock. It should drop nder 1000 rpm, the idle is lower than that.

Britt

 

[NjMpSpeed]

im sorry 100 rpm

 

[NjMpSpeed]

the bov is all the way on hard. my car idles at around 700 rmp and when it drops its goes down to about 100 rpm.

 

[mattybo]

the bov is all the way on hard. my car idles at around 700 rmp and when it drops its goes down to about 100 rpm.

get a 19mm attachment so less air escapes...

 

[yanyan]

Ehh dont adjust all the way to HARD, adjust it little by little, rev it up, and see where ur RPM's fall to, keep adjusting it that way... also, which vacuumline are you using?

 

[mattybo]

Ehh dont adjust all the way to HARD, adjust it little by little, rev it up, and see where ur RPM's fall to, keep adjusting it that way... also, which vacuumline are you using?

well if he has it all the way on hard and its still stalling then he is kinda SOL. It means the valve still isnt closing fast enough...

 

[NjMpSpeed]

thanx mattybo you just made me feel a whole lot better! lol jk sorry man im just really bummed out about this. anyone else with any ideas somebody please help! i adjusted the bov screw every turn and the same thing happens

 

[jersey_emt]

You have the vacuum line hooked up to the top nipple right?

Are you using a dedicated vacuum line?

 

[NjMpSpeed]

the vacuum line is running to the t valve

 

[NjMpSpeed]

let me get some pics up maybe you guys could help me

 

[NjMpSpeed]

here on the pics

tell me what you think

 

[03MSPRO]

Use the stock BPV. Problem solved.

 

[jersey_emt]

The hose is kinked a bit, get rid of that sharp turn.

 

[NjMpSpeed]

well i bought this fmic off of a member and in return i gave my stock setup plus $$ so i no longer have my stock bpv can someone please help me in nj ill pay them! my life sux!

 

[jersey_emt]

No need to pay anybody....come to the meet on the 29th and we'll get it fixed

 

[CustomMSP]

Shouldn't you be recirculating?

 

[NjMpSpeed]

i would man but i dont feel comfortable driving the car 2 hours who the hell knows wut could happen

 

[NjMpSpeed]

i really cant explain to you guys how upset i am. sorry to be bitching like a little girl but when your 18 money is pretty hard to come by for a fmic. and the 6 hrs it took me to install wasnt any better. i really wish somebody would please come up with a solution