HELP after putting new rotor button in '93 Protege DK

[george14282]

Need some help from people who are smarter than me. I'm a career Ford V-8 guy and this is my first Mazda vehicle so I'm a little in the dark. The other day I changed the distributor cap and rotor button on my '93 Protege DX 1.8L 4 cylinder. After putting it back together, it wouldn't start at all. After inspecting the old rotor button, I discovered it could be put on 3 different ways. I'm sure I installed it in the wrong position. So I went old school and bumped up the #1 cylinder to TDC on the compression stroke, pointed the rotor button at the #1 spark plug tower, and wired it counterclockwise 1-3-4-2. It won't hit a lick. I've got good hot fire to all 4 plugs and the car ran fine prior to me screwing it up. Any suggestions or words of wisdom? I live about 30 miles from the closest garage and the tow bill alone would kill me.

thanks

 

[Hughes412]

Free bump for the new guy.

 

[applerule]

Make sure you got the correct rotor button. I had the same problem and compared rotor buttons and they wern't exactly the same. Advance auto gave me the wrong one for my 95 626 and I had to go back to get the correct one.