OK, based on the tips of others here is a good way to remove the Z919.
Go to Menards and buy 2 - 3mm machine screws and get them as long as you can find. Screw them into the 2 holes on each side of the kenwood head unit until they get hard to spin. use Pliars or vice grips and pull on the 2 screws at the some time and it should slide out.
Good Luck
Tim
Go to Menards and buy 2 - 3mm machine screws and get them as long as you can find. Screw them into the 2 holes on each side of the kenwood head unit until they get hard to spin. use Pliars or vice grips and pull on the 2 screws at the some time and it should slide out.
Good Luck
Tim
