Gauge Pods.... Do we want Three or Two Gauges

[kep0ne]

DUDE YOU HAVE A PICTURE OVER YOUR TACH! thats disturbing, seeing as how thats the most important thing on your dash =P id rather have it over the speedo...hehehe

 

[TightMP3]

Everyone needs to pay attn to this, I am very sorry but i need to get you all to direct your questions and ordering now to Mitch at Protege5online.com, He is going to be the one that is helping us get them, so if you want one....email him sqrbean@midsouth.rr.com.

Also!!!

Mitch at Protege5online.com is working on getting a group order for Tri Point Carbon fiber hoods finalized. If you are
interested in a CF hood for your MP3 e-mail him at sqrbean@midsouth.rr.com

 

[<YellowMP5>]

Sorry to be a pest but are we going to see some pictures first or what? I hate to buy "air".

 

[TightMP3]

These are NOT the final product. This is with only two gauges but the ones that are going to be made as three will have another at the top. Also keep in mind when we make the order of these they will use this one to make the mode. The mode will actually be the same color as the factory pillar, also it will bolt on to the factory one also.

[ 01-30-2002: Message edited by: TightMP3 ]

 

[redprotege5]

could you send the pics to me?

krotine
jason_krotine@limbachinc.com

 

[PaulMP3]

im still not sure id like to see pics. What gauges are usefull that can be installed ourselves??? i know i def. want a voltage meter. and also what is "Autometer phantom guages" MP#847 that tach looks tight!!

 

[YellowMP5]

The mode will actually be the same color as the factory pillar, also it will bolt on to the factory one also.

So they will bolt on to the stock pillar? Not replace it? I was hoping that they would replace the stock pillar rather than bolt on to it. I hate to make holes in it. I am not really going to keep the car till i die
And does anybody know, how hard is it to remove the pillar?

 

[TightMP3]

On 95% of the gauge pods that are made for the pillar are bolt on gauge pods. Meaning that you have your factory pillar....then you have this gauge pod that is formed to fit over the factory pillar and you have two screws to put in it to hold it. On the screw heads you might be worried that they will be shown, but!! there is this buttons that go over the screw heads that are also the same color as the factory pillar.
Example of the button
Example of gauge pod that is formed to fit a Pillar

Now for the gauges...2 1/16" is the size of the hole....now as far what you can put in there it is what ever you want to monitor. Come on guys think about it...do you want to know what the water temp. is? get that gauge...do you want to watch the air fuel mixture? get that gauge. Same goes for a boost gauge or a volt gauge.
Oil Pressure
Nitrous Pressure 0-1600 PSI
Pyrometer 0-1600F
Trans Temperature 100-250F
Air Fuel Ratio (Lean-Rich)
Water Temperature 140-280F
These are just some different ones you can get, and if you want to find them...goto a search engine or better yet just tell Mutch at Protege5online what you want...he can get it. You dont have to get what everyone else wants.
Example of a MX-6
Also look at my pix below my signature and goto the folder Pillar...

 

[TightMP3]

tell me what you think

 

[CrappyBoy]

1

 

[Protege5 Online]

Alright, we're looking decent. I believe I've gotten about 8 e-mails for 3 guage pods & 4 for 2 guage pods. So, we arent quite there but we are at least getting almost half way there. If I get the 20 orders for the 3 guage pods before I get enough orders for 2 guage pods, I'll contact all you 2 guage pod people & see if you want to switch. As soon as I get the 20 3 guage pod orders then I'll be able to get them started. So, those of you that havent e-mailed me, do so quickly so we can get this finished!!

 

[AZxMP3]

Mitch,

Just mailed ya.... Count me in for a 3 guage.

 

[MP3#847]

I am in on the 2 guage pods if I keep my car

 

[TightMP3]

Come on Guys you all were really excited....now that they finally got it back to me i approved it an d now we have to get 20 ordered so they will produce it. Mitch is going to buy a bunch of them when we have enough people commit to it. We have like 8 people now but when we get 20 then they will be produced. You need to email Mitch if you all want these.... mbuckner@protege5online.com
Thanks!!

 

[Protege5 Online]

Alright, right now, Im going to worry about getting the guage pods done so the price for the 3 guage pod will be 59.00 total in the US. 2 Guage pods will be 55.00. Payment is preferred through paypal with account sqrbean@midsouth.rr.com but MO will work. If I can get these payment ASAP so I can see where we stand on orders & how many we need, I'll try to get an idea of when they will be done. So, please get payment to me as soon as you can. Again, paypal account is sqrbean@midsouth.rr.com & MO address is:
Mitch Buckner
PO BOX 1541
Collierville, TN 38027

Thanks
Mitch
Protege5online.com

 

[MP3#847]

Can somebody tell me if the triple gauge pod will fit with the 5in tachometer??

 

[LinuxRacr]

Hey guys,

What is the status on the orders? I will send a Paypal payment if we ar close to completion.

 

[PaulMP3]

i emailed u recently and u said u could only get the 3 pod what is the status on a 2pod if so i definitly will buy the 2 pod if they are available

 

[TightMP3]

how many people have sent the mone to mitch? That will let us know how many more we need to make the order. I think we only have like 9 people that have commited....what happended to the 40 people that signed up
?????

 

[LinuxRacr]

We (myself included) need to get the ball running on this. We need to send the money cause I want my gauges!