fog light doesnt work (fuse bulb, bumperside wiring all good)
- Thread starter callphy
- Start date
took the switch down today, think the relay is integrated in the switch itself
tested continuity the red white line is connected with the blue yellow line when switch is clicked
but i cant read any voltage from these 2 wires
edit: later i found out voltage reading only possible with "keys in, turn it on" and "hand brake down"
tested continuity the red white line is connected with the blue yellow line when switch is clicked
but i cant read any voltage from these 2 wires
edit: later i found out voltage reading only possible with "keys in, turn it on" and "hand brake down"
Last edited:
http://www.floptical.net/mazda/wire/
this is the complete wire diagram to the protege. download the file, and have fun!! edit:: click the PDF file.
this is the complete wire diagram to the protege. download the file, and have fun!! edit:: click the PDF file.
hornsfan10609
Certified Mazda Tech
- :
- 2003.5 Mazdaspeed Protege x2
Should be this one:
yea tanks. i just finished testing it.
it works, the blue wire has voltage after i turn on fog light , red wire gets voltage too.
same as the switch, blue yellow wire has voltage after i turn the switch on, red wire gets voltage.
also tested the fuse at fuse box, both 15A fuse for fog light works.
now the problem is i dont get any voltage from the plug right beside washer fluid reservoir
(so it comes down to the wire between fuse box to the washer fluid reservoir are some how disconnected?)
where can i start checking now? should i take the wire bundle out and follow the connector all the way back to fuse box?
it works, the blue wire has voltage after i turn on fog light , red wire gets voltage too.
same as the switch, blue yellow wire has voltage after i turn the switch on, red wire gets voltage.
also tested the fuse at fuse box, both 15A fuse for fog light works.
now the problem is i dont get any voltage from the plug right beside washer fluid reservoir
(so it comes down to the wire between fuse box to the washer fluid reservoir are some how disconnected?)
where can i start checking now? should i take the wire bundle out and follow the connector all the way back to fuse box?
hornsfan10609
Certified Mazda Tech
- :
- 2003.5 Mazdaspeed Protege x2
The X-01 just represents the wire or harness, it isn't anything on the car. The wires must be damaged or you are testing the wrong connector. Have you tried new bulbs?
i tested everything on bumper side with the continuity setting on my multimeter, reading shows all good,
and i tested relay and switch for voltage all good ,and both relay + switch functions as i click them
but when i test the E7-03 connector(located near the windshield washer fluid that connects bumper side and engine bay side) both wires shows no voltage at all
so it must be something in between E7-03 and relay which is the wiring hidden behind radiator and headlights
(if u say E-01 is nothing, can i just reroute a new wire from relay toward the E7-03 connector? )
and i tested relay and switch for voltage all good ,and both relay + switch functions as i click them
but when i test the E7-03 connector(located near the windshield washer fluid that connects bumper side and engine bay side) both wires shows no voltage at all
so it must be something in between E7-03 and relay which is the wiring hidden behind radiator and headlights
(if u say E-01 is nothing, can i just reroute a new wire from relay toward the E7-03 connector? )
did more voltage reading
the fuse box only the bottom fog light fuse has constant 12volt no matter the car is on/off on its right pin, the top one doesnt have any voltage no matter car on/off switch on/off
does it work like this? or the top one suppose to have 12volt going through them when foglight switch clicked? (could anyone do voltage reading on this fuse when u turn on the foglight?)
the fuse box only the bottom fog light fuse has constant 12volt no matter the car is on/off on its right pin, the top one doesnt have any voltage no matter car on/off switch on/off
does it work like this? or the top one suppose to have 12volt going through them when foglight switch clicked? (could anyone do voltage reading on this fuse when u turn on the foglight?)
Last edited:
