Fmic And Smic Info

[FSDET]

Front Mount InterCoolers

Mental Addiction Motorsports:
Price:$1295(shipped) at www.**************************.com
Core Size:24"x6"x3.5"
Piping Material: Powdercoated(Black or Silver) Mild Steel
Additional Info: Comes with Short Ram Intake, one 9"and one 12" Spal Electrical Fan Boost Science BPV(HKS SSQV Upgrade for $200). No Cutting Involved, Allows You To Upgrade The Radiator To OEM P5, PWR, AWR.
​

​

Perrin:
Price:$1330(shipped) at www.**********.com
Core Size:28"x9.25"x3.5"
Piping Material:Aluminum
Additional Info:Uses the stock BPV,can be order with HKS and Greddy BOV flanges for additional cost.Requires cutting and replaces the stock bumper beam.Allows you to upgrade the radiator to OEM p5,PWR,AWR radiators.

HiBoost:
Price:$900 :www.spdracing.com www.protegegarage.com
Core Size:22"x6.5"x 2.5"
Piping Material:Chrome Plated Mild Steel
Additional Info:Comes with HKS(old school) BOV,can be ordered with Greddy BOV,HKS ssqv BOV. No cutting required.Cant Upgrade Radiator.

iON:
Price:$925(plus Shipping):www.ionperformance.com
Core Size:24"x6"x3.5"
Piping Material:Stainless Steel
Additional Info:Uses the stock BPV,Requires cutting .Allows you to upgrade the radiator to OEM p5,PWR,AWR radiators.

B.E.G.I:
Price:$699shipped(special discount till Thanksgiving)$749shipped after that. :www.protegegarage.com
Core Size:18"x6 1/8"x3"
Piping Material:Mild Steel.
Additional Info:Can be ordered with Greddy BOV,HKS ssqv BOV. No cutting required.Cant Upgrade Radiator.

Pann Auto:
Price:$855(plus shipping) at www.pannauto.com
Core Size:24"x6"x3"
Piping Material:Aluminum
Additional Info:Uses the stock BPV,can be ordered with HKS and Greddy BOV flanges for additional cost.Requires minimal cutting. Your choice of unfinished or black powercoated piping.

Side Mount Intercoolers





​

Circuit Sport:

Price:$650 retail,forum and GB discounts may apply
Contact: SpicyMSP@hotmail.com or SpicyMSP
Additional Info: Direct Bolt On, can be used with stock plastic or aftermarket hardpipes(as long as the hardpipes fit the stock SMIC)

TurboHoses:
Price:$ www.**********.com
Additional Info: Direct Bolt On, can be used with stock plastic or aftermarket hardpipes(as long as the hardpipes fit the stock SMIC)

CustomMSP's:
Price:$ CustomMSP
Additional Info: Direct Bolt On, can be used with stock plastic or aftermarket hardpipes(as long as the hardpipes fit the stock SMIC)

I Chose The Mental Addiction Motorsports FMIC. Good Price, Good Customer Service, No Cutting required,Direct Pipe Routing.
​

PM if u have anything u want to add.
and everyone who has one of these kits plz tell me what u think.

 

[Captain KRM P5]

just sold the first couple of BEGi intercoolers. The forum discounted price on them until Thanksgiving is $699. After that, it will be $749. PM me if you need any other info on it or on the HiBoost as we sell both.

 

[FSDET]

can u send me the core size and the price with the IC-TB pipe and the colors that can be ordered with, also the hiboost size and price thanks

 

[FSDET]

Mods Plz Sticky this when when i put the pricing and everything. i know there are other threads on MSP vendors but this is more specific.

 

[SpicyMSP]

Can you just write to contact me for all pricing, and addidional information.
My email is SpicyMSP@hotmail.com or PM at "SpicyMSP". Also is a DIRECT bolt on product. NO modification required.

Also Retail is $650, but special forum discounts may apply

 

[mspeedpro]

wagner no longer selling their fmic??

i didnt realize ion was only that much-- a lot lower than i thoguth it was...

 

[FSDET]

i dont know about the wagner kit PM all the info so that i can add it.

 

[low_psi]

i didnt realize ion was only that much-- a lot lower than i thoguth it was...

I need to talk to them about shipping charges cause Leonardo said he got his for $1170 shipped, I really hope that wasn't at the $925+shipping price though. I assume it wasn't though.

 

[FSDET]

it might have been customs tax

 

[DSMConvert]

hmm i was under the impression that the CS one would NOT work with hardpipes....When talking with turbohoses they had said it was a little thicker and wouldnt work with the hardpipe angles...I have not tested this myself so I cant confirm, this is just want I had been informed of...

 

[mspeedpro]

i love the size of the ion fmic

 

[FSDET]

i love the size of the ion fmic

u gota be informative then that man. try telling us the core size,install times, problems with the install, diffrence in tracktimes-whp.

 

[FSDET]

Updates

 

[kazson]

you forgot to mention the Pann Auto FMIC kit

here is a quick run down



Pann Auto:


Price:$855(plus shipping) at www.pannauto.com/
Core Size:24"x6"x3"
Piping Material:Aluminum
Additional Info:Uses the stock BPV,can be ordered with HKS and Greddy BOV flanges for additional cost.Requires minimal cutting. Your choice of unfinished or black powercoated piping.

 

[kazson]

a little bit of info on Wagner Motorsports...but i dont know alot about this one....

http://www.wagnermotorsports.net/intercoolers.htm

included in the price is a Greedy Type-S also you get a intake. $1200 bucks but you get it all in one shot. Stainless steel piping.

they dont mention core size ill do some searching and update my post in a few

 

[FSDET]

thanx

 

[t3ase]

Stickied.. If only more members contributed in the way you have..

(2thumbs)

 

[SpicyMSP]

yea, and then we would have a million more informative stickied threads, that no one reads and posts questions to anyway...

 

[evolv]

Here's a new one? or maybe an old one that didn't make the list. Just found it after a search for "mazdaspeed" on yahoo stores.

AMS SMIC - Mazdaspeed
Design to increse cooling efficiency and charge air density for higher performance vehicles, the unit directly replaces the less efficiency factory intercooler unit. Our system features CNC machined T-6061 billet aluminum end tank with brackets. The air to air intercooler core utilizes wide extruded tubes with internal fins, which provide increase structural integrity and greater cooling efficiency. Eash system is meticulously TIG welded and pressure tested to ensure the highest quality. No mods are necessary for direct bolt in installation.
Fits Mazdaspeed Protege
Direct replacement unit- no mods needed
Increase horsepower(15+ whp) and torque(10+)
Reduces thermal load placed on the engine
Further inhibits pre-ign
CNC machined billet alumunum plenum chambers and bracket
<LI>TIG welded- pressure tested
Apex online price $550 USD


http://store.yahoo.com/apexr1/amssmmapr.html

 

[jurgs01]

That's a tube and fin (not bar and plate) intercooler. The bar and plate is better.