Fixing wheel hop

[BlueBeast22]

Since Ive installed my RR-racing front and rear MM inserts and the AWR side MM's Ive noticed my wheel hop drop drastically. But I still get a slight shutter/hop when excelerating. Im currently running my MSP on the stock suspension. Im planning on getting either the Tein S-Tech's or the Eibach Sportlines. Will getting stiffer/lower springs help even more with wheel hop or should I also look at getting different front struts also?

 

[Tommy1005]

I can't really answer your question, but if you give me until next week I will let you know. I have the Tein S-techs, RR-Racing front and rear mounts, and the AWR side mounts sitting in my living room waiting for a chance to get on a friends lift so we can knock it out. I will post pics and initial driving impressions once I've got it all finished.

 

[smo0f]

yes the lower your car is to the ground and stiffer the springs are, the less wheel hop/better launches you will experience

 

[BlueBeast22]

yes the lower your car is to the ground and stiffer the springs are, the less wheel hop/better launches you will experience

So which spring would be better in a from launch stand point? I know the Tein give the car a rake look and lower the front more than the back, but I also know they arent as stiff as the sportlines. Ill be buying my springs on friday and I know Eibach doesnt make the sportlines anymore so if the sportlines will be better then I think I will go with those. I happen to like the rake look the Tein S-Techs give tho...

 

[BlueBeast22]

I can't really answer your question, but if you give me until next week I will let you know. I have the Tein S-techs, RR-Racing front and rear mounts, and the AWR side mounts sitting in my living room waiting for a chance to get on a friends lift so we can knock it out. I will post pics and initial driving impressions once I've got it all finished.

The inserts were pretty easy to get in. Getting the MM's out is a pain tho... But the ride in cabin vibrates like a mofo, compaired to the stock MM's.

 

[Kooldino]

The inserts were pretty easy to get in. Getting the MM's out is a pain tho... But the ride in cabin vibrates like a mofo, compaired to the stock MM's.

That's why I made my own rear motor mount insert

 

[ONRAILS]

You also may be feeling clutch chatter. I have that now... when accelerating in 1st letting off the clutch. I thought it was wheel hop, but it's not.