Estimated horsepower????

[Wbriggs19061]

ok well i was just wondering if anyone could give some estimates on my horsepower...this is what im working with..not all of it is installed yet and a couple things just ordered soo here goes.
Perrin:
j-pipe back exhaust
short shifter
Corksport J-pipe
AWR:
front motor mount
Autometer ultra-lite gauges
boost & volts (mounted in Din holder)
egt (custom vent pod)
Kartboy exhaust hangers
AEM Injen CAI
SMIC 2" aluminum hard pipes
Greddy type-rs bov
Apex-i TT
TurboXS MBC set@8psi

Not Installed:
Perrin fuel rail
AWR rear motor mount
Dsm-Afc
autometer cf fuel pressure gauge
jdm intake cam
kartboy/corksport shifter bushings
pg intake manifold
nsn spacer

i know not all of it is performance s***...but i didnt feel like editing it all out. thanks for all the info.

 

[jlee29]

hey hey we should race for fun!!!

 

[JDM Sam]

185-195 hp

 

[blthlt]

he's at 8 psi untuned so i say 175-180

 

[Earful]

Wow...both you guys...are close to one another....

 

[JDM Sam]

he's at 8 psi untuned so i say 175-180

his sig says he has the AFC and to include the mods he has yet to install.

 

[hellcat]

You need engine management to take advantage of the full potential of those mods! Tune tune tune!!! 190 hp to the wheels FTW!!!

 

[JDM Sam]

or buy an evo mr like you.

 

[blthlt]

with the afc tuned good I think he could see 195.

 

[Dpwhitehead1]

and you said you couldn't buy my fenders

lol.

i hope you see past the 200whp mark. good luck.

 

[djarkitek]

without the tune i would guess 170-180 like everyone else.

 

[crashkelly]

I dunno I'd have to peg him at almost 190whp. I mean if you figure like 8-10 hp for the j-pipe back exhaust, 5hp for the CAI, another 12-16 with the SMIC, and then 7.5 for the added boost (i've heard that 5hp increase per 1lb of boost is a decent estimate...correct me if im wrong)...so my estimated max is going to be an addition of 38.5whp (not to mention the fact that with turbos the combination of certain parts will give you more horsepower exponentially) ... so say the stock horsepower is like 155whp (170 at the fly) then youve got like 193.5whp. This obviously is a guesstimate, but pretty close id think to what he'd be getting.

 

[crashkelly]

nevermind he just has hardpipes...not a SMIC upgrade...minus 16whp...you all are probably right about 177.5whp at the max.

 

[Blitzd]

Eleventy Billion

 

[Wbriggs19061]

jesus i see everyone starts commenting when i brake my laptop and cant get online...but yea tomorrow ill be installing all the non installed mods. then maybe next saturday ill take it to get it dynoed and afc tuned..

 

[jeffmsp]

170whp. Seriously, maybe even lower. You arent going to make any power at 8psi, its a waste of time. Go 10psi you have the mods. At 10psi tuned I bet you will see 200whp and never have any issues since you have the supporting mods.

 

[Wbriggs19061]

yea i think ill get it done at 8 and then while on the dyno bump it up to 9 or 10...truck took all my time today so tonight/tomorrow ill being getting everything installed

 

[210_ZOOM]

Did everyone notice the PG manifold, easy 25whp from that mod. Im thinking cause the stock smic probably 185whp +/- 5whp. Dyno results FTW!
Post ASAP!

 

[tehturbo]

What is the stock WHP? I predicted stock WHP to be about 144 based on drivetrain configuration. Does anyone have a stock dyno that can show me 155 WHP?

 

[Wbriggs19061]

my 155hp dyno was with perrin exhaust, hardpipes, and injen cai..i think that was all i had.