Enkei 18" 18x7 +38

[Rawyzf]

Will these fit you think?

Enkei RS6

18X7
Silver
5:100/114, 38mm offsetPart #: 61002

 

[FunkyBuddha]

Umm..whats your stock offset on the MS6?

 

[Rawyzf]

Umm..whats your stock offset on the MS6?

I think +60

 

[FunkyBuddha]

Then I don't think that would fit.

You might rub. Since that wheel is gonna stick out at least another 1.5 inches.

http://www.1010tires.com/WheelOffsetCalculator.asp

 

[Rawyzf]

Then I don't think that would fit.

You might rub. Since that wheel is gonna stick out at least another 1.5 inches.

http://www.1010tires.com/WheelOffsetCalculator.asp

Cool, that's what I was thinking too. I think I need an offset of +45 or higher.

 

[Raynman]

Yep, 38 is too low. Definitely aim for around +45 and above. Rolling the fender helps a lot too.

 

[FlipandFunk]

45 to 48mm should be the lowests you should go.

 

[MAZDASPEED619]

45 to 48mm should be the lowests you should go.

not really the lowest i've seen on a 6 was 42 and i am personally running a 43 offset. of course your rear fenders would have to be rolled...

 

[Raynman]

not really the lowest i've seen on a 6 was 42 and i am personally running a 43 offset. of course your rear fenders would have to be rolled...

Now that you mentioned it, I now recall a 6 that has 18x7 Centerline wheels and those wheels are +42 offset. Not sure if the fenders are rolled (they probably are). Good catch.

 

[FlipandFunk]

42 is too low, besides you really need 235's on a ms6 instead of dinky 215 so 42 even with rolled fender is gonna be tough, stay at 48.

 

[jrodhotrod]

The factory offset in the Speed 6 is +55.

The factory wheels are 18x7.

From what I have read just about any 8" wide wheel will require a roll, even if it is high offset like +48. Even the RX-8 wheels are hit and miss. Some people say you need a roll and others don't.

 

[Wiggum]

The factory offset in the Speed 6 is +55.

The factory wheels are 18x7.

From what I have read just about any 8" wide wheel will require a roll, even if it is high offset like +48. Even the RX-8 wheels are hit and miss. Some people say you need a roll and others don't.

Which is true...

I run a 18x8 RX8 wheel, 50MM offset...

Lets go through my RX8 wheel history...

Silver RX8 wheels - 2005 Mazda6s - 225/45/18 Bridestone Potenzas
Silver RX8 wheels - 2005 Mazda6s - 235/40/18 Falken Azenis
Silver RX8 wheels - 2005 Mazda6s w/ Mazdaspeed Springs - 235/40/18 Falken Azenis
Silver RX8 wheels - 2006 Mazda6i - 225/45/18 Bridestone Potenzas
Silver RX8 wheels - 2006 Mazda6i - 235/40/18 Falken Azenis
Polished RX8 Wheels - 2005 Mazda 6s w/ Mazdaspeed Springs - 235/40/18 Falken Azenis
Polished RX8 Wheels - 2006 Mazda 6i - 235/40/18 Falken Azenis
Polished RX8 Wheels - 2006 Mazdaspeed6 - 235/40/18 Falken Azenis

Never had rubbing, even on the lowered car....

I'll have some AutoEXE "Low Down" springs on soon, we'll see if it rubs then...