hey im about to order a passenger and driver side mount set for my probe gt (fs motors and kls have the same mounting points so we use the same mounts) no one on proabtalk has looked into the sls or street unit mounts... just want to know wich one ios better the street unit looks a bit stronger... but then again with car crap sometimes the big beefy stuff is jsut made from cheap metal to compensate... im not doing anything crazy jsut a klze swap and a 55 shot... so i dont think ill brake ither one... but since i daily and race this on the weekends id rather get some feed back first
engine mounts,sls vs awr vs street unit
- Thread starter s3xrapt0r
- Start date
- :
- 2003.5 Mazdaspeed Protege
id say awr is better than **********. I heard bad things about street unit ones breaking from a few people. Sls seems like kinda sketchy company so i would just go with awr thats what i did.
- :
- 2003.5 Mazdaspeed Protege
what you mean by wrong? like it wont fit or he got the wrong engine mount. Go to *************
- :
- 2003.5 Mazdaspeed Protege
i have had issues with awr in the past and there endlinks snapping off i did run them in the winter though. So i thought id give them another chance
sls is out then 
the issue people were having with awr is that the bolt holes were drilled wrong,the metal tube that the bolt goes through on the bushing was to small to fit the factory mount bolt (i wouldnt want to go skinnier).. theres a thread or two about awrs stuff screwing up but i cant find much... also i kinda think awr is a little over hyped but then again inever used their products yet... is there alot of cases of the street units breaking ? or just a few... also i show my car sometimes and the AWR mount is kinda fugly looking lol
the issue people were having with awr is that the bolt holes were drilled wrong,the metal tube that the bolt goes through on the bushing was to small to fit the factory mount bolt (i wouldnt want to go skinnier).. theres a thread or two about awrs stuff screwing up but i cant find much... also i kinda think awr is a little over hyped but then again inever used their products yet... is there alot of cases of the street units breaking ? or just a few... also i show my car sometimes and the AWR mount is kinda fugly looking lolhornsfan10609
Certified Mazda Tech
- :
- 2003.5 Mazdaspeed Protege x2
I like my Medieval mounts, I have only had them for about 8k miles but they were good quality for the price. The AWR passenger mount I have is a great piece, worth every penny. Very thick, solid metal and welds.
Spiced MSP
Member
- :
- 2016 Peterbilt 579
AWR mounts all around, vibes sucked for a while until the break in was done. Now, I forget I have them somethimes until I pop the hood and see them No issues at all here
