Endlinks

[Matt V]

I'm gonna get new rear endlinks soon when I lower my car, and I have the MP3/MSP Racing Beat rear sway bar, which endlinks do I need? Is it this one?

Or is it the one that's 7.5" long? I forget if they used the shorter or longer ones.

 

[Circuit]

It depends on how low you are going to go. I am running the regular protege ones that are the longest I think. You basically want the RSB to be parallel to the ground, so the best thing to do is measure once your springs are settled

 

[Matt V]

I'll be going with the Tein S-Tech's.

 

[Tzar177]

With Illumina struts and tein s tech springs my rear endlinks are 8.25" long stud to stud

 

[Matt V]

With Illumina struts and tein s tech springs my rear endlinks are 8.25" long stud to stud

I guess that's my answer, except RockAuto doesn't sell any that long.

 

[The Kid]

When I lowered mine I went with AWR adjustables. The design is much more durable and very easy to adjust the length. Your choice though.

 

[RGN .5 AASN]

808 has a thread to make your own endlinks, or you can get raceline endlinks

 

[MonctonP5]

I personally just emailed Tony at AWR Racing exactly the setup I was putting on and he did the matching for me plus gave me a quote shipped to my door that was even less than I thought I would have to spend. Go with adjustable end links as you don't know when or how much your Teins will settle at their permanent dropping point.

 

[The Kid]

I forgot to tell you that I have Tiens as well and the AWR's worked perfect.