Dyno day outcome?
- Thread starter MPNick
- Start date
Mental Addiction
Banned
It went good except for a few hickups.
Pat's car has a broke intake valve and a slipping clutch.
So we where not able to get any good numbers out of it.On the street before the valve issue, it pulls HARD on 11psi.
In 4 days we built a motor, designed the Sleeper revision turbo kit, installed the Haltech E6X,etc.It was alot of long nights.
Pat's car has a broke intake valve and a slipping clutch.
So we where not able to get any good numbers out of it.On the street before the valve issue, it pulls HARD on 11psi.
In 4 days we built a motor, designed the Sleeper revision turbo kit, installed the Haltech E6X,etc.It was alot of long nights.
Bigg Tim is still on top, come knock me off Beau.(lol2) J/K I still can't get to my first numbers, this time I only did 202whp and a max of 205wtq at 8psi. Hey, a win is a win!!! I need to go back to the original setup and tune it and give her another shot.
Beau had 2 of his kits dyno both had the MPI tuner. One with a GT28RS and 5psi did 170whp and 186wtq with the Bigg Tim tune on it. Damn nice numbers for only 5psi. The other one ran a GT2871 at 6psi and made 175whp at 4k RPM before he had to let off. I didn't have his giving enough fuel, so he couldn't continue. It would of been a 180-190 run if I set it up right. We'll try again. These things would kick ass at 8psi and would probably beat me, since my turbo is to big for 8psi. Very nice combo, I want a GT2871!!!!
The real king of the hill, even though it doesn't count since he has an SRT-4, was 1FASTMP5. He put down 242whp and 278wtq at 15psi on the stage 0 SRT-4. That is a torque monster and is pretty nice. (There was a muscle car there that did over 370whp, but he has too many cylinders, so that doesn't count!!!
)
LinuxRacr and 505zoom didn't dyno since they were too far from home, I don't blame them. I would of liked to see 505's have at it, but that's okay.
RyanJayG ran his forged 8:1 compression motor on there with no turbo and put like 105whp down. It ran real rich, that motor will love the turbo when he puts it on. The motor sounds like stock, pretty cool, makes me want to build one again.
Too bad pdaudio83 didn't get his one there, they worked all night and morning getting that thing running.(plus like 3 days befor ethat) They didn't get the miles on there they wanted and the tune wasn't done, so he took the smart route. I wouldn't of pushed it either. That new mani looks sick though, very nice, VERY nice.
There was a MSP there with Beau's FMIC and I think he gain 20 something hp out of it. That's a good increase out of his FMIC!!! I think he was in the 135whp range bone stock, and in the 155whp range with just the FMIC. Not sure about the exact numbers though.
All in all a good day, especially since no protege blew. (or beat me(lol2) ) Maybe this smack talking will get Beau's big dogs out and woop me into the ground.(thumb)
Oh yeah, no Hiboost. That is as of when I left at 1pm.
Beau had 2 of his kits dyno both had the MPI tuner. One with a GT28RS and 5psi did 170whp and 186wtq with the Bigg Tim tune on it. Damn nice numbers for only 5psi. The other one ran a GT2871 at 6psi and made 175whp at 4k RPM before he had to let off. I didn't have his giving enough fuel, so he couldn't continue. It would of been a 180-190 run if I set it up right. We'll try again. These things would kick ass at 8psi and would probably beat me, since my turbo is to big for 8psi. Very nice combo, I want a GT2871!!!!
The real king of the hill, even though it doesn't count since he has an SRT-4, was 1FASTMP5. He put down 242whp and 278wtq at 15psi on the stage 0 SRT-4. That is a torque monster and is pretty nice. (There was a muscle car there that did over 370whp, but he has too many cylinders, so that doesn't count!!!
)LinuxRacr and 505zoom didn't dyno since they were too far from home, I don't blame them. I would of liked to see 505's have at it, but that's okay.
RyanJayG ran his forged 8:1 compression motor on there with no turbo and put like 105whp down. It ran real rich, that motor will love the turbo when he puts it on. The motor sounds like stock, pretty cool, makes me want to build one again.
Too bad pdaudio83 didn't get his one there, they worked all night and morning getting that thing running.(plus like 3 days befor ethat) They didn't get the miles on there they wanted and the tune wasn't done, so he took the smart route. I wouldn't of pushed it either. That new mani looks sick though, very nice, VERY nice.
There was a MSP there with Beau's FMIC and I think he gain 20 something hp out of it. That's a good increase out of his FMIC!!! I think he was in the 135whp range bone stock, and in the 155whp range with just the FMIC. Not sure about the exact numbers though.
All in all a good day, especially since no protege blew. (or beat me(lol2) ) Maybe this smack talking will get Beau's big dogs out and woop me into the ground.(thumb)
Oh yeah, no Hiboost. That is as of when I left at 1pm.
Last edited:
- :
- 2001 Pro 2.0 LX
what about ddogg77's thumper? damn, I was expecting at least 2 +400hp monsters there
i will have the footage i took up tomorrow, prolly tomorrow nite.
it was a nice turn out, was nice meeting everyone. such a nice day today in phoenix, so friggin hot compared to last week though. last week kicked ass, today was just fuggin hot!
yeah, we were all anxious to see the pat's car, buts unfortunately, it aint ready to shine yet. in due time, in due time. so much work was done, just needed more time.
but, expect videos tomorrow nite, or even afternoon. im sending everything over right now, editing and uploading tomorrow.
btw, i just wanna say that 1fastmp5's srt-4 is badass. his suspension setup is sweeeet.
it was a nice turn out, was nice meeting everyone. such a nice day today in phoenix, so friggin hot compared to last week though. last week kicked ass, today was just fuggin hot!
yeah, we were all anxious to see the pat's car, buts unfortunately, it aint ready to shine yet. in due time, in due time. so much work was done, just needed more time.
but, expect videos tomorrow nite, or even afternoon. im sending everything over right now, editing and uploading tomorrow.
btw, i just wanna say that 1fastmp5's srt-4 is badass. his suspension setup is sweeeet.
that's cool .. i can't wait to see who will dyno @ 400whp 1st hehe
we're having a dyno day up here next month ... Focus dynoed at 296 last summer ... hopefully he'll get close to 400 now with a modified turbo and more boost
i can't wait to dyno mine too
we're having a dyno day up here next month ... Focus dynoed at 296 last summer ... hopefully he'll get close to 400 now with a modified turbo and more boost
i can't wait to dyno mine too
duMb KeoLa
Member
im kind of disapointed... i thought there would be better numbers... couple more months and the real numbers will come out
jrodhotrod
Contributor
- :
- 2003 Mazda Protege5 (Mine) 2002 Nissan Sentra GXE (Wife's)
Nice report, sounds like a fun day.
What this thread needs is Pictures
What this thread needs is Pictures
jrodhotrod
Contributor
- :
- 2003 Mazda Protege5 (Mine) 2002 Nissan Sentra GXE (Wife's)
Hi Boost wasn't going to make it. When I last talked with Juan they were passing on the dyno day so they could attend Mazdafest as a vendor.MPNick said:
Perhaps someone can talk him into hopping on the dyno at Mazdafest
