Dragger's Guide: Mazdaspeed Protege Quarter Mile Bragging Rights

Status
Not open for further replies.
BlkZoomZoom said:
lol....I want you to get alittle farther ahead so it will be more dramatic....

I'm hoping with a good launch , I can do 12.2 or a 12.3 We will see in April or May.
 
With the mph you are getting I would be dissapointed to see higher than a 12.1 with a perfect launch.


Here's most of the timeslips for the MSP...anyone that says a stock motor can't handle some abuse can kiss it. lol
 

Attachments

  • timeslips.webp
    timeslips.webp
    82.7 KB · Views: 304
i cleaned up my room and got rid of most of them except my 14.2 run and a few others that actually meant something lol especially the last one of the season (21.5 @ 45mph)
 
Well I just got back from the track and was only able to run a 14.3 @ 99.97mph. This is with a crappy launch and fuel cut. Mods are in my sig
 
You needed my tires too! It's all my fault! lol! (dark)

~ Hey put my stock time up in there. ( in sig )
Will post new time, with the mods, next time at the track.(hump)

And how do you run 16.7 in a MSP (Smokedya)?!?!? Thats what I ran stock PR5!
 
Last edited:
I made a 16.93 @ 86mph - 2.25" Catback & SRI with ATX
hopefully i'll smash into the mid-low 15s by early summer of this year :)
 
MazdaSpeedSter said:
You needed my tires too! It's all my fault! lol! (dark)

~ Hey put my stock time up in there. ( in sig )
Will post new time, with the mods, next time at the track.(hump)

And how do you run 16.7 in a MSP (Smokedya)?!?!? Thats what I ran stock PR5!
I dont know but I think your sig has plenty of links in it.
 
R/T... -.058
60'... 2.373
330... 6.502
1/8... 9.882
MPH... 72.94
1000... ERROR
1/4... 15.234
MPH... 91.86

stock boost, injen intake, exhaust, crappy (not copper) plugs, michelin zeix @ 28PSi(<-crappy $90 tires).

SUMMARY: 15.23, intake, exhaust, plugs.

will post time slip soon.
 
Lil Freek said:
I made a 16.93 @ 86mph - 2.25" Catback & SRI with ATX
hopefully i'll smash into the mid-low 15s by early summer of this year :)
Ok Buddy, This should make everyone run out and get a Turbo. (cool)

BLACK LINES = Your BEST NA Run
RED LINES = MP5T only pushing 10 PSI
 

Attachments

  • MP5T 10 PSI VS PAUL ATX TIME.webp
    MP5T 10 PSI VS PAUL ATX TIME.webp
    55.6 KB · Views: 251
  • MP5T 10 PSI VS PAUL ATX TQ.webp
    MP5T 10 PSI VS PAUL ATX TQ.webp
    60.7 KB · Views: 229
hahahaha. that's pretty sad, actually.
although the weight of my car is off, so the HP numbers should be higher, but the times are correct..

i got the tires nice 'n hot for that run and roads were still warm when I ran that :)

sooooon i'll be well into the 15s.. or 10s.
 
Dude, I think the tranny will be your 1/4 Mile problem... As stated, we will come up with something to get around it. The Lentech solution might help alot.
 
yeah.. if i go with all the lentech pieces.. i'm going to be the only ATx to offer some real competition for you fancy shmancy MTx people :P

Until it's built up, I probably won't slam it (so i say now)
 
Status
Not open for further replies.

New Threads and Articles

Back