drag rims needed

[unr8ted]

Ok guys there are people that drag there cars on the track.. ok what rim size are you using and what type of tire are you using. < slices or DR's > well if there is any way i can get 15x8 on the car it would be great becuase 16" in slicks and DR's not alot of opt. any feedback will be great thanks

 

[Young Roids]

there is no way to run a 15 inch rim 16 is the smallest that will slear the calipers.

 

[driver311]

Yes you can make them fit. But only a select few. Call h@r and get some 1 1/2 billet adapter spacers. Then there are only a few rims that will work. I know for a fact that trak lites in a 15 will work. Barely I mean barely clear. I think the rota slips would probably work too. Then you are good to go. You can run 24inch or 26inch slicks. Though if u are lowered 26s will be outa the question. they will hit the fenders. I posted pics of my car with this setup. Check it out.

 

[laloosh]

wait so 26s hit the fenders now? or is that only with the spacers

 

[driver311]

wait so 26s hit the fenders now? or is that only with the spacers

yes! settle down.

 

[unr8ted]

Yes you can make them fit. But only a select few. Call h@r and get some 1 1/2 billet adapter spacers. Then there are only a few rims that will work. I know for a fact that trak lites in a 15 will work. Barely I mean barely clear. I think the rota slips would probably work too. Then you are good to go. You can run 24inch or 26inch slicks. Though if u are lowered 26s will be outa the question. they will hit the fenders. I posted pics of my car with this setup. Check it out.

Thanks Driver you would say 15 x 7.5 or 15x 8 you would happen to know the offset off hand or is it 35 ??? thanks and chris you know me so when we going to run again call eric have to set some stuff up (eekdance)