Cx9 Remapped! Top speed 212kmh!

[GrandSavrify]

Hello all Mazda owners, I got my Mazda CX9 remapped yesterday, the limiter has been removed and the car is able to go 212kmh, it's still going but there was car in front. after remapping the engine fault code appear so I still have to wait for my tuner to get things done. When the car is on high speed, the brake disc is a nightmare I can tell, I changed the crooked brake disc but still the same. Maybe I should go for brembo brake?

 

[sts7049]

no clue why you would want to drive a cx9 that fast, but more power to you!

 

[hornsfan10609]

+1 cool, but I have to ask... why?

 

[Lindyrect]

Why not? If I could slap a turbo on it too I would.

 

[Davicho]

Here do this to your CX-9. LMFAO!

http://www.superstreetonline.com/multimedia/videos-01/1000-hp-bisimoto-honda-odyssey-van-burnouts/21162/

 

[hornsfan10609]

Why not? If I could slap a turbo on it too I would.

It's illegal, unsafe and impractical

 

[brandini]

Get better pads, torque the lugs nuts with a torque wrench to the proper torque spec, and have the rotor runout checked and have the rotors resurfaced to flat if they're outside the factory spec.

All numbers needed are in the service manual.

 

[S197GT]

212kmh = 131mph

I know I'm not the only one who had to google it.

 

[brandini]

Just make sure your tires are rated for it...

 

[Greg K]

after the tune, and not driving at 212km/h, have you noticed much of an improvement in fuel consumption with normal driving?

 

[glassjaw1984]

Here do this to your CX-9. LMFAO!

http://www.superstreetonline.com/multimedia/videos-01/1000-hp-bisimoto-honda-odyssey-van-burnouts/21162/

Lol at that video ! haha nice!!

 

[GrandSavrify]

212kmh = 131mph

I know I'm not the only one who had to google it

Hi guys! Here's the proof! It's not 212kmh anymore, it can go more than 220kmh =P
http://youtu.be/rPavbxfJitM

 

[GrandSavrify]

Yes, a lot of improvement on fuel consumption, and most importantly, it is much more responsive compared to stock. The better fuel I use, the higher horsepower I will get, such as octane 98. Here here guys check out this =) http://youtu.be/rPavbxfJitM

 

[GrandSavrify]

Get better pads, torque the lugs nuts with a torque wrench to the proper torque spec, and have the rotor runout checked and have the rotors resurfaced to flat if they're outside the factory spec.

All numbers needed are in the service manual.

Mazda service centre told me that it was a manufacturer defect, they recommend me to change a new branded rotor such as Brembo instead. Will keep you guys updated if I got a new set of brake.
Cheers (nana)

 

[MSke390]

sorry I'm with the rest of the folks here...WHY? I'm all for power, my last car had a 332ci motor making 460HP but the CX-9 is not a high speed vehicle

 

[MSke390]

This is what started it all

https://search.yahoo.com/search;_ylt=A0LEVyoxpgBVKdgA2lFXNyoA;_ylc=X1MDMjc2NjY3OQRfcgMyBGZyA2NybWFzBGdwcmlkA2U0ZS5QUnY2UWhpTDYxM01Bb244aEEEbl9yc2x0AzAEbl9zdWdnAzUEb3JpZ2luA3NlYXJjaC55YWhvby5jb20EcG9zAzAEcHFzdHIDBHBxc3RybAMEcXN0cmwDMTkEcXVlcnkDZG9kZ2UgdHVyYm8gbWluaXZhbgR0X3N0bXADMTQyNjEwNTkxOQ--?p=dodge+turbo+minivan&fr2=sb-top-search&fr=crmas

 

[voldsom]

This is what started it all

https://search.yahoo.com/search;_ylt=A0LEVyoxpgBVKdgA2lFXNyoA;_ylc=X1MDMjc2NjY3OQRfcgMyBGZyA2NybWFzBGdwcmlkA2U0ZS5QUnY2UWhpTDYxM01Bb244aEEEbl9yc2x0AzAEbl9zdWdnAzUEb3JpZ2luA3NlYXJjaC55YWhvby5jb20EcG9zAzAEcHFzdHIDBHBxc3RybAMEcXN0cmwDMTkEcXVlcnkDZG9kZ2UgdHVyYm8gbWluaXZhbgR0X3N0bXADMTQyNjEwNTkxOQ--?p=dodge+turbo+minivan&fr2=sb-top-search&fr=crmas

LOL at the Yahoo! search. Followed the link, and had to scroll past 5 ads to see any results.

 

[GrandSavrify]

It's not just about top speed, it has better acceleration power and better fuel consumption.. Why not =)

 

[voldsom]

It's not just about top speed, it has better acceleration power and better fuel consumption.. Why not =)

Why not indeed. Ya never know until you try

 

[dragosdor]

It's not just about top speed, it has better acceleration power and better fuel consumption.. Why not =)

who did the remapping? is it a company that I can contact?