Corksport Motor Mount Inserts

[nazgul350r]

I was finally able to install the Corksport Motor Mount Inserts over the weekend. The rear was a small pain to get the bolts to break loose. My 3/8 extenstions would twist a 1/4 turn before I could push no more. I grabed a neighbor that was outside and with two of use we were able to break them loose. ( I also need to find a BFP!) That one took about three hours. The front was easy of course and around ten mintues.

The stock rear mount had a small crack 1/4 inch crack on one side. But the front mount was completely broke/seperated on one of the two sides.

There is a small amount of vibration at idle now, but no where near as much as mount filled with window weld. Shifting is also acheived with less effort. I have on doubt that wheel hop will also be elimanted also, since that is a main reason people do mounts.

 

[orangeade]

thanks for the mini review on these.........i was waiting to order a set with the fmic.....if it ever gets done........but let us know what they're like in a few weeks.........thanks.

 

[mspHtown]

did you remove the manifold to get to the rear mount?

 

[nazgul350r]

No, I removed the battery and intake to TB pipe. I have some pictures that I can put up for all if you like.

 

[mspHtown]

dont worry about it but thanks anyways!

 

[orangeade]

how are they holding up? any review after a couple weeks of having them in?

 

[nazgul350r]

They are holding up great but I have only drove the car a hand full of times.

 

[Kypatrick]

No, I removed the battery and intake to TB pipe. I have some pictures that I can put up for all if you like.

i would like to see the pics. Are those Inserts as good as gettin the S.U. or SLS replacements? I seen them and was curious if anybody had them.

 

[nazgul350r]

I will post pics later today too drunck to think that much. I have only had the corksport in this car. In the probe I had i did the window weld and it rattled like abitch