Corksport FMIC GB

Status
Not open for further replies.
i think i'll just drive down and pick up the kit and spend a night or two in portland as well. are you able to put "made in the U.S.A." on the invoice or the packaging.....that way we won't have to pay duties. good old NAFTA....

Shoot, if youre gonna be in town, why not get it installed?
 
bump........5 more

Corksport FMIC GB

1. 210_zoom
2. mp5_tunerx
3. 4drboost
4. orangeade
5. Lodivigo
6. Greensleeper with Greddy BOV flange, please delete all OEM BPV hardware; CS PMed
7. Daonly1around (if it will work with stock radiator)
8.philly_81
9.cbr600rx7
10. Arok22 (I went CS and checked it out. I want it!)
11.BIGANT
12.FuglyMonkie
13. alca0811 (upgrade to larger core)
14.vangj01 (HKS SSQV BOV flange welded to cold pipe)
15.zoom 79gc
16.
17.
18.
19.
20.
 
5 more..... shoot! lets see if we can get these filled before the end of next week. ATTENTION! Calling all MSP Junkies and Nerds! Get on the list or get a buddy to do it!
 
I think 15 is quite enough,who on earth sells 15 FMIC`s in one go these days for god sakes.Lets be thankfull for once.:-)
 
yeah 15 is enought but now i gotta save for some reason...cause you guys took so long but yeah its like how much? again ahah

ill get it end of aug if that fine...
 
Putting "Made in the USA" on an invoice is easy enough to keep the guys at the border happy.

We can install the intercooler kits if someone want us to.

Thanks
 
Hello All

The promo code to get this going is MSPFMICGB. You need to enter this promo code when you put your order in. There will be a place for the promo code after you enter in your address. If you are in Canada I strongly recommend you select USPS for shipping.

The link to the Intercooler kit is here

We need 5 more people! If you have any questions send me a PM or an email to Derrick@corksport.com

Thanks
Derrick
 
Hello All

The promo code to get this going is MSPFMICGB. You need to enter this promo code when you put your order in. There will be a place for the promo code after you enter in your address. If you are in Canada I strongly recommend you select USPS for shipping.

The link to the Intercooler kit is here

We need 5 more people! If you have any questions send me a PM or an email to Derrick@corksport.com

Thanks
Derrick
 
this really pisses me off that I have the money for this but I dont have it at the same time since my parents owe me 800 ARGGHHHH!!!!
 
gimme a week to think about it, and we'll see. I just talked to my mom and she can give me 300 of what she owes me so I might be able to pull it off.(nana)
 
5 more

Corksport FMIC GB

1. 210_zoom
2. mp5_tunerx
3. 4drboost
4. orangeade
5. Lodivigo
6. Greensleeper with Greddy BOV flange, please delete all OEM BPV hardware; CS PMed
7. Daonly1around (if it will work with stock radiator)
8.philly_81
9.cbr600rx7
10. Arok22 (I went CS and checked it out. I want it!)
11.BIGANT
12.FuglyMonkie
13. alca0811 (upgrade to larger core)
14.vangj01 (HKS SSQV BOV flange welded to cold pipe)
15.zoom 79gc
16.
17.
18.
19.
20.
 
Corksport FMIC GB

1. 210_zoom
2. mp5_tunerx
3. 4drboost
4. orangeade
5. Lodivigo
6. Greensleeper with Greddy BOV flange, please delete all OEM BPV hardware; CS PMed
7. Daonly1around (if it will work with stock radiator)
8.philly_81
9.cbr600rx7
10. Arok22 (I went CS and checked it out. I want it!)
11.BIGANT
12.FuglyMonkie
13. alca0811 (upgrade to larger core)
14.vangj01 (HKS SSQV BOV flange welded to cold pipe)
15.zoom 79gc
16.503MSP
17.
18.
19.
20.
 
Wouldn`t our cars need an oil cooler kit as well,would it not prolong the life of the engine and allow better performance.
 
Wouldn`t our cars need an oil cooler kit as well,would it not prolong the life of the engine and allow better performance.

At the level most of our cars are, IMO it is not worth it. Now on the other hand, you have tons of money then go ahead and put all kinds of bells and whistles.

Back on track we need 4 more for this people. Come on and put your name on the list.

Corksport FMIC GB

1. 210_zoom
2. mp5_tunerx
3. 4drboost
4. orangeade
5. Lodivigo
6. Greensleeper with Greddy BOV flange, please delete all OEM BPV hardware; CS PMed
7. Daonly1around (if it will work with stock radiator)
8.philly_81
9.cbr600rx7
10. Arok22 (I went CS and checked it out. I want it!)
11.BIGANT
12.FuglyMonkie
13. alca0811 (upgrade to larger core)
14.vangj01 (HKS SSQV BOV flange welded to cold pipe)
15.zoom 79gc
16.503MSP
17.
18.
19.
20.
 
Im seriously debating, although my MSP is in shop right now getting a new motor and Im hoping the costs will be mininal... Im forged now though :D

Also what would the effeciency range be for this core, I forgot the formula to find the flow.

I am looking to make around 300-330whp

I have "heard" that the competitor kit whos core is 22x6.5x2.5 will flow for 300whp nearing the peak of its effeciency.

This one having a larger core of 24x6x3.5 should easily be able to make 300+ whp correct?
 
Im seriously debating, although my MSP is in shop right now getting a new motor and Im hoping the costs will be mininal... Im forged now though :D

Also what would the effeciency range be for this core, I forgot the formula to find the flow.

I am looking to make around 300-330whp

I have "heard" that the competitor kit whos core is 22x6.5x2.5 will flow for 300whp nearing the peak of its effeciency.

This one having a larger core of 24x6x3.5 should easily be able to make 300+ whp correct?


I see one of the individuals on the list has requested an increased core for an additional price. Maybe if this wouldnt work, they could offer something like that.

Hopefully Corksport will chime in, or maybe you could contact them directly on their website www.corksport.com
 
Status
Not open for further replies.

New Threads and Articles

Back