CEL P0301 is finally off

[desertmike680]

After taking my car to Mazda and having them replace my ignition coil on cylinder one, my CEL came back 24 hours later. So, I put my Turbosmart BOV to recirc and the CEL has been off for almost 2 weeks. The longest its been off for a long damn time. I couldnt be any happier!!! Just an FYI.

 

[KrGsMrNKusinagi]

After taking my car to Mazda and having them replace my ignition coil on cylinder one, my CEL came back 24 hours later. So, I put my Turbosmart BOV to recirc and the CEL has been off for almost 2 weeks. The longest its been off for a long damn time. I couldnt be any happier!!! Just an FYI.

The only BOV I know of that wont throw a cel on our cars in VTA mode is like the hybrid ones and the HKS SQV it seals at idle alot of the other ones dont seal all the way at idle. Eh Im trying to run my HKS in recirc but the nipples too long it hits the vent to the intercooler on the hood and cuts through the VACUUM LINE

 

[ssinstaller]

The only BOV I know of that wont throw a cel on our cars in VTA mode is like the hybrid ones and the HKS SQV it seals at idle alot of the other ones dont seal all the way at idle. Eh Im trying to run my HKS in recirc but the nipples too long it hits the vent to the intercooler on the hood and cuts through the VACUUM LINE

You can unscrew the allen screws holding the top of the BOV on and rotate that nipple to wherever you want it..

 

[KrGsMrNKusinagi]

You can unscrew the allen screws holding the top of the BOV on and rotate that nipple to wherever you want it..

I dont think you can on the HKS one.. It comes out the back But I will try thanks