Can you run spacers on stock Racingharts?

[zoomin MP3]

I have 14mm for front wheel spacers and 10mm for back.

and whats the stock offset on those wheels? what do you come to?

He's running a +42 offset on those wheels. With the adapters he's running it comes to a total offset of +28 front and +32 rear.

 

[mazdafreak7]

better at least get hub and wheel centric...its dumb not to..

 

[Laser Blue]

http://cgi.ebay.com/ebaymotors/15MM...ies?hash=item518bba0902&_trksid=p4506.c0.m245
thats the smallest offset they have, would that work??? Or should I PM them and see if they have a 10MM one? so it would be at +45 and not +40

They can't go smaller than 15mm or they won't fit right. The way these work is you use the nuts that come with them to bolt the spacer down to your hub. Then you mount the wheel on the new spacer studs and secure with your lugnuts. If the spacer is shallower than 15mm your stock studs will stick through the spacer too far and the wheels wont flush up to the spacer.

 

[sean22306]

so is this ever gonna happen? lol

 

[SeR_Cyclops]

i dont know i would like to do it but, I dont know how it would look with the stock rims being so narrow?

 

[31R]

I just got 8mm spacers on a 17x7 +55 miata rims. Should i get extended studs? Im not sure how many threads i was able to get the lug around.

 

[WIMSPWI]

http://www.4shared.com/file/139909807/12f92c3a/DSC00108.html
http://www.4shared.com/file/139909771/bf8758f5/DSC00149.html
http://www.4shared.com/file/139909830/a7b0ea5a/DSC00111.html
http://www.4shared.com/file/139910349/dd104de2/_2__DSC00113.html
http://www.4shared.com/file/139913579/e005cd7d/DSC00152.html

Hope these few pics are ok. If you need closer look, I'll need to take more. I have 14mm for front wheel spacers and 10mm for back.

a ford MSP?!?!? what car is that?

 

[323]

ford laser overseas

 

[xDJ DUBx]

I run 10mm in the rear on my RHs, gonna do the front soon as well.

 

[SeR_Cyclops]

How does the 10mm look?

 

[xDJ DUBx]

It looks really good, personally with your stance, I'd go 15mm spacer. That should be perfect. 20mm seems to be too much.

I'd run 15mm but I tuck tire, so with a 10mm, my tires would rub a lot more than the currently do.

 

[SeR_Cyclops]

Do you have any pics of your car with those spacers?

 

[xDJ DUBx]

Best pic at the moment

I'll try to take some today that really show off the stance of the wheels (2thumbs)

 

[SeR_Cyclops]

dang, that does look good in the rear, Man im sorry Mazda F'ed up. White would have been the best color on the msp. But nooooo Mazda didn't make it in white.

 

[supergti]

Actually, Ford Tierra or Lynx, it's a twin model of mazda 323. Only sell in Asia Pacific area. The interior and engine are exactly the same as Mazda 323. Just the slightly different looking.

 

[xDJ DUBx]

Actually, Ford Tierra or Lynx, it's a twin model of mazda 323. Only sell in Asia Pacific area. The interior and engine are exactly the same as Mazda 323. Just the slightly different looking.

(scratch)

 

[Wagonbacker9]

not reading 6 pages, so this may have been said, but changing the offset, will throw off your alignment my car came with +40's on it, and there was nasty camber, switched to the Mz3 wheels 52.5 offset, no camber wear issues. same with my snow tires which I believe (but don't really care) are 50 offset. I'll be running FDs with 3mm spacers (I think) next summer, for a 47 offset when all said is and done. you CAN run whatever offset you want, but anything below 42 (so anything over a 13mm spacer) on stock size tires and you'll probably be chewing on tires with your fender unless you roll them.

 

[ND4MSP]

I run 10mm in the rear on my RHs, gonna do the front soon as well.

Do you have the spacers on in your sig. Because it looks on point. Are you running extended lugs?

 

[xDJ DUBx]

In the rear I do, both spacers and studs but in the front, its stock.