CAI Install (bay area anyone)

[JRsP5]

Hi, I just got my new Injen CAI and a friend and I are trying to install it. Right now we are in the process of taking off the stock airbox, but are confused on where a specific part goes. It's really hard to describe, and at the moment I do not have a camera, so if there is someone who I can call here, or if you live in the bay area, and got nothing to do, you could possibly stop by. I'll try my best to describe the part here. This part is right past the flex tubing of the stock intake closest to the engine and it has 1 white and red wire connecting to it, and has 2 pieces of black tubing connecting to it. The piece it self is copper colored and it connecting to the piping. Sorry if that description is bland, but I cant do much better.

 

[mountjonas]

once you get that off the stock tube, i connected it to the intake manifold (i think) right by the strut bar towards the middle of the engine. there's two bolts and you can wedge it in between those to hold it down.

 

[JRsP5]

It shouldn't really matter where it goes right? because it justs need to be sevure i'm guessing. In the instruction manual, it says to put it on the firewall above the throttle body, but we dont see any place it really can go.

 

[yourfather_luke]

if you still need help doing this PM me...i'm in santa clara and can help you with it..only takes 30 min or so

 

[wipedawg]

http://www.msprotege.com/forum/showthread.php?t=117265&highlight=injen+CAI

some pictures on this post show what it should look like

 

[yourfather_luke]

but yeah- read that how-to. i did the 1st one from that only. took about an hour. if i can handle that one, a retarded monkey could do it

 

[Mmmmmken]

I'm pretty sure this is what you're talking about. I've attached a pic of where it installs.

Hi, I just got my new Injen CAI and a friend and I are trying to install it. Right now we are in the process of taking off the stock airbox, but are confused on where a specific part goes. It's really hard to describe, and at the moment I do not have a camera, so if there is someone who I can call here, or if you live in the bay area, and got nothing to do, you could possibly stop by. I'll try my best to describe the part here. This part is right past the flex tubing of the stock intake closest to the engine and it has 1 white and red wire connecting to it, and has 2 pieces of black tubing connecting to it. The piece it self is copper colored and it connecting to the piping. Sorry if that description is bland, but I cant do much better.