Black Out Tail Lights??

[ZoomVT]

Hey Mazda3Zoom (Tony, right?) can we arrage something so i get some of that leftover? or you could get me a can? I am in the same probelm as you, i have everything black and gray, and the damn blinkers stand out so much.

 

[RockBlocker]

wouldn't a can of nightshades do the same thing?

Sure nightshades would do the same thing, but happens if you screwit up, what happens if you want to remove it,what happens if you are told to remove by law enforcement..... The time, effort and problems that arise from nightshade IMHO is not worth saving a few bucks. Did I mention our film has clear coat finish that is waxable and shiny??

 

[RockBlocker]

hey rockblocker, how much is a kit for an i model taillights and sidemarkers

That is what the site is for. We are not able to post pricing unless in the vendor section.


www.rockblocker.com

 

[ZoomVT]

really? even as an authorized vendor? that cant be right.

yeah rockblocker, i am going to bake my headlights, but if the film gets messed up i may have to hit you for another set.
If i needed to take the film out, is there any resideu left? how difficult is it?
i may take the fog overlays out.

 

[RockBlocker]

really? even as an authorized vendor? that cant be right.

yeah rockblocker, i am going to bake my headlights, but if the film gets messed up i may have to hit you for another set.
If i needed to take the film out, is there any resideu left? how difficult is it?
i may take the fog overlays out.

It is called respect and control. If we didnt have a vendor section would the point be. It would turn into a free for all and vendors would do sales all over the place and make it harder for the consumers to find our sales and prices for products.

To answer your question - It is truely hard to say a clear answer. Ovens and bakes times vary all the time based on brand and temp. If you want more info please call and we will go over it with ya

 

[BC3I]

ok i just did my Night Shades Spray today..looks AWESOME!! here are the pics>>>>

 

[ZoomVT]

It looks pretty tight man.
good job.

 

[BC3I]

Thanks

 

[tsunami]

i don't see a big issue if you don't put to many coats on the side markers... i never mentioned to put it on the tail lights or headlights.. for the reasons that rockblocker stated... but for the side markers doing one coat at time till you get the desired black should be fine... how many coats was that bc?

 

[mazda3zoom]

Hey Mazda3Zoom (Tony, right?) can we arrage something so i get some of that leftover? or you could get me a can? I am in the same probelm as you, i have everything black and gray, and the damn blinkers stand out so much.

Yeah thats no problem. And i just checked and the name of the stuff IS nite-shades and its by VHT. Anyways PM me and we can figure it out.

 

[bacon]

were did u say u got that spray?

 

[BC3I]

i got the spray from e-bay and i used 3 coats

 

[LEXi73]

so you had plenty left over in the can then? you did the rear and sides with one can?

 

[BC3I]

no i used a can and a half i did the tails and all 4 side markers and the rear reflectors

 

[RockBlocker]

i don't see a big issue if you don't put to many coats on the side markers... i never mentioned to put it on the tail lights or headlights.. for the reasons that rockblocker stated... but for the side markers doing one coat at time till you get the desired black should be fine... how many coats was that bc?

As side marker mod that iwould be fine since the area is very small and remote.

But if you use at a tail light mod-

larger areas are harder to make smooth and shiney. No offense to the car above, but it isnt very shiny and over time it will just get duller.

If you want or need to remove it you have to laquer thinner to get it off or soemthing else harsh like that. The laquer thinner can eat into the polycarbonate plastic (ie taillight) and cause the light to crack, fade or discolor. $8.00 now and possilbe hundreds later.

Everyone is entitled to their own idea, wants and needs. Which is just fine. We are just trying to inform the community. If you dont buy from us that is okay too.

 

[hyck]

bc3i the M badge, did you paint the inside or you got it from somewhere ??

 

[BC3I]

no i bought a pre-cut piece of CF and set it behind the emblem.