Best car of the club event ! free prizes !

[supman]

Tuning Spirit International/ VTTR North America Sponsored.

Vote for your favorite/best car in this forum.

How to:
There are two phases of this event, the first one being apply for pre-vote.
post up your picture in the pre-vote thread in Photo/Video section on the main board.
and then everybody will get to vote for your favorite car to be in the finals.

second round being the final vote, where 3 cars will be voted and given 1st, 2nd, 3rd places. Each will be rewarded with a free prize provided by TSI/VTTR.

Rules:
- All models are welcomed in this event as long as it's a Mazda (except for Rotary models, sorry)
- Please give your best, post the best pictures and include as much details about yourself and your car as possible.
- Every one will only get one vote, no dummy voting accounts allowed. Violators will be automatically disqualified.
- Prizes are 100% free except for applicable taxes you might be charged when recieving it. (depends on local law)
- No purchase neccesary.
- Limited to members in North America Continent only.
- Contestant MUST submit own car, not cars off the internet etc.
- Supman will NOT enter this contest (first)
- All prizes will be shipped approx. 4-5 weeks after the contest has ended.
- TSI/VTTR reserves all rights to disqualify and change any rules or cancel the contest without prior notice.

Prizes: (One per each winner)
1st Place - VTTR Forged small 6-piston big brake kit with one piece slotted rotor.
2nd Place - VTTR Large Oversized Slotted rotor kit.
3rd Place - Full set for one car VTTR Super Sports/Race (choice of one) brake pads.

Pre-vote submissions starts NOW !! ENDS ON FEB. 10th.
DO NOT BE LATE !

 

[slug420]

 

[supman]

ok so nobody is taking this seriously eh ?

guess I'd tell them to keep those brakes....?

 

[slug420]

my car isnt really in contention so i just figured that post would be a bump...

 

[Scooter_TO]

meh, I know I don't stand a chance, but I figure I might as well give 'er a go.

2002 - Midnight Blue P5
Injen CAI
Tein S-Tech Springs
Tokico HP struts
JSP Carbon Fiber Hood
Custom Hood props
DGM Carbon Fiber Grill
19" Giovanna Kobe Rims
Brembo Cross-drilled Rotors
KVR Carbon Fiber Pads
Autoexe Lip
Accolade Eyelids
Custom made Rear Bumper with Carbon Fiber Insert
Erebuni Rear Wing
RSD Racing Seats
Smoked tails
Smoked Bumper Lenses
Sparkco Axle-back exhaust
Shaved rear hatch
White interior Trim accents
Tints
OBX Tomcat Shifter
Body Colour-matched pedals
Apexcone 7000k HIDs
Yellow Lamin-X Fogs
Yellow calipers
Pioneer AVH-P6500 In-dash DVD / screen
Optima Yellow-top battery
Custom trunk-liner housing:
2 x JBL GT120s, Pheonix Gold R5.0:1 amp, and Stinger 1 Farrad Cap w/ Digital Readout

Already purchased, waiting to be installed:
BuddyClub2 Side skirts
18" Rev Model II Hyperblack

Pics

 

[smo0f]

you got my vote just for the girls. oh and the car is nice too

 

[pluto316]

I've said it once, I'll say it again; They will let ANYONE become models these days, apparently.

 

[smo0f]

I've said it once, I'll say it again; They will let ANYONE become models these days, apparently.

you're absolutely right. i'm in the process of signing papers to be one of the first regular looking overweight male models. wish me luck

 

[sanblaster]

I've said it once, I'll say it again; They will let ANYONE become models these days, apparently.

If you have a mini skirt that covers at least 80% of your ass, have a really ugly-ass tatoo, and you own a pair of boobs then you have the qualifications.

 

[Scooter_TO]

I've said it once, I'll say it again; They will let ANYONE become models these days, apparently.

agreed. A few of the girls are pretty fugly. But there are a couple of nice ones in there. I've got a couple from Darknights that were alright. But they're lower resolution and older pics, so I didn't post originally.

I'll add them to my originally post jsut to try to help keep this thread clean and on-track.

 

[Pirana]

Pirana's SLO-MSP, daily driver (boom07)

• Fiber Images Limited Edition EVO carbon fiber hood
• Mitsubishi EVO hood vent and insulator
• Xcelerated Concepts carbon fiber trunk lid
• Konig black opal Imagine 18"x 7.5" +45 wheels
• DG Motorsports front urethane spoiler
• DG Motorsports carbon fiber eyelids
• P5 fog lamps
• 6000K HID kit
• Ksport full coil-over suspension w/camber plates
• GTspec front strut bar
• Injen intake
• Perrin FMIC
• Greddy Type-RS bov
• Optima red-top battery
• Custom Optima aluminum battery tray holder
• Mazda EDM wide-angle side view mirrors
• Polished P5 valve cover
• Chrome coolant reservoir
• Ventus 214/35/18
• Full Vibrant exhaust (on its way)
• Unichip piggy-back with boost controller
• Fog lamp switch controls A/B boost map
• Aluminun oil cap
• Red Sparco Torino seats w/custome brackets
• DG Motorsports carbon fiber glove box cover
• DG Motorsports carbon fiber arm rest cover
• DG Motorsports carbno fiber gauge bezel cover
• Kartboy shifter bushings
• AWR poly-urethane motor mount
• Rotorworks cross-drilled/slotted brake rotors
• Goodridge stainless-steel brake lines
• Defi BF series boost gauge
• Defi BF series egt gauge
• Defi BF series water temp gauge
• Defi BF series hoods
• Defi controller
• DaveB brushed rings
• AEM UEGO wideband
• Custom steering wheel pod
• Familia trunk badge
• Apex-i turbo timer
• Kenwood steering wheel radio remotes
• Alpine volume control knob

More pics can be found in the SLO-MSPs pic thread:

http://www.msprotege.com/forum/showpost.phpp=2235589&postcount=1

http://www.msprotege.com/forum/showpost.php?p=2235590&postcount=2

http://www.msprotege.com/forum/showpost.php?p=2235592&postcount=3

 

[GHOSTWHISPER]

AHHHH...Supman why do you have to do this to me now, my car is going to the PShop this week.... And all my parts are going on..

Well here are some old old pics of 2 of my rollas, maybe you can vote for me on the fact that i have 2 HB;s.....OHHH i want those brakes

Dont mind the teal car...its not mine

Damn all of these are so old, my car is so far from this now

I wish this was going on like a month later. Both of the Hatchbacks have so much more done to them... Neither of my cars are showcars though. Never intended them to be, never really want them to be. But I will post it up anyway..maybe the other guys wont see this... (first)

 

[Concept MSP]

Concept MSP

Exterior Modifications:
18"x7.5" Rays Engineering Gunmetal G-Games Wheels
215/40/ZR18 Dunlop SP Sport FM901 Tires
CATZ Galaxy White H4 Headlight Bulbs
CATZ Galaxy White H3 Foglight Bulbs
Professionally Tinted Windows (Kartunes)
DG Motorsports Carbon Fiber Downforcers
Fiber Images Carbon Fiber Hood (custom painted by A1 Auto Body)
DG Motorsports Carbon Fiber Eyelids (color matched by A1 Auto Body)
DG Motorsports Carbon Fiber Mirror Covers
DG Motorsports Carbon Fiber Upper Grill
Bluebatmobile Red Tail Light Overlays
Bluebatmobile Smoked Foglight Overlays
Amber Side Markers
Suspension Modifications:
Racing Beat 27 mm Front Stabilizer Bar
Racing Beat 20 mm Rear Stabilizer Bar
Eibach 1" Pro-Kit Lowering Springs
GTSpec Front Lower Tie Brace
GTSpec Front Strut Bar
GTSpec 4 Point Ladder Bar
GTSpec Rear Lateral Arm Braces
GTSpec Rear Strut Bar
Interior Modifications:
Kartboy Black Anodized Aluminum Shift Knob
Sparco Drilled Aluminum Racing Pedals With Rubber Inserts
3 Auto Meter 2 1/16 Inch Angle Rings
Auto Meter Ultra-Lite 2 1/16 Inch Electrical Air Fuel Ratio Gauge
Auto Meter Ultra-Lite 2 1/16 Inch Mechanical Boost Gauge
Auto Meter Ultra-Lite 2 1/16 Inch Electrical Oil Pressure Gauge
Auto Meter RPM Activated Module
Black Auto Meter Quick-Lite Shift Light
Carpeted Trunk Lid
Carbon Fiber Gauge Overlay
Dave B Brushed Aluminum Gauge Rings
P7 Aluminum Dead Pedal
DG Motorsports Carbon Fiber Armrest Cover
Black Leather Shift Boot with Orange Stitching
Black Leather Ebrake Boot with Orange Stitching
DG Motorsports Carbon Fiber Glove Box Cover
DG Motorsports Carbon Fiber Shift Plate Cover
DG Motorsports Carbon Fiber Gauge Bezel
Custom Molded 3 Gauge Pod with Molded Radio Trim Ring
Light Grey Microfiber Suede A Pillars with Molded Tweeters
Light Grey Microfiber Suede B and C Pillars

Light Grey Microfiber Suede Headliner
Performance Modifications:
Garrett T25R Ball Bering Turbocharger
A'PEXi Turbo Timer
Injen Cold Air Intake
Magnecor Spark Plug Wires
MAZDASPEED Oil Filler Cap
MAZDASPEED Radiator Cap
Optima Red Top Battery
Custom 4 Gauge Ground Wire Upgrade
GReddy Coolant Catch Can
Kartboy Short Shifter
Kartboy Shifter Bushings
Apex Motorsports 2.5" Downpipe
Apex Motorsports 2.5" Exhaust with A'PEXi N1 Muffler
Kartboy Exhaust Hangers
AWR Front and Rear Motor Mounts
Polished Heat Shield
Gloss Black Painted Valve Cover
DG Motorsports Carbon Fiber Engine Cover
Black Mazdaspeed Reservoir Covers
Perrin Performance Front Mount Intercooler
TurboXS H-34 Racing Bypass Valve
Chromed Engine Brackets, Battery Tie Down and Prop Rod
Black ATP Turbo Silicone Couplers
Hella 118db 500Mhz Supertone Horn
Audio Modifications:
Kenwood Excelon KDC-MP919 Head Unit
Alpine SPR-17LS 6 Front Component Speakers
Alpine MRP-M350 Amplifier

Alpine MRP-T220 Amplifier

Monster Digital 1 Farad Capacitor

Stinger Right Angle RCA Adapters
Phoenix Gold Xenon X12D4 12" Subwoofer
Custom Fiberglass Enclosure and Amp Tray Wrapped in Black Microfiber Suede
Kenwood 6" 2 Way Rear Door Speakers
Dynamat Sound Dampening Material
Blaupunkt DVD-ME2 Mobile DVD Player
2 5.6" Screens in Headrests
Rockford Fosgate Type RF 4 Gauge Power Kit with Inline Fuse
Tsunami 4 GA 4 Input Positive Battery Terminal
Tsunami 4 GA 3 Input Negative Battery Terminal
Rockgord Fosgate Type RF Dual Twist RCA Signal Cable
2 Rockgord Fosgate Punch Performance Series Twister RCA Signal Cables
Rockford Fosgate Punch Performance Series Fused Power Distribution Block
Rockford Fosgate Punch Performance Series Ground Distribution Block

Soon to be added modifications include DG Motorsports Urethane Front Lip, and Xcelerated Concepts CF Trunk.

Pictures are from last year.

 

[bigwoofer]

Well this would have been more fun in another month and a half when my Work rims arrive!!! Also next week my car goes in to a local guy here who specializes in hot rods, for some custom hand laid pin-striping. I have a whole new dash coming in from the local wreckers here and i'm completely remolding my dash as well.

Ok here is my car, I bought it brand new back in 2001 with 14km on the odometer. I know some people don't like my car because it's too much a show car, or some people think its too ricey. I won't deny this is definitely a car built for shows. It's also a car built to be driven 365 days per year. It also hauls my family of 4 around. This car drives around daily at 9psi, has seen 16psi on more than one occasion and hasn't given me any problems what so ever. Everything I do with this car is thought out much in advance and done with alot of precautions in place, even to the point of overbuilding things as I am a big fan of doing things right the first time.

Things I'm most proud of.... all the stuff that is one off hand built stuff. The motorized cryo rack in the bumper. You wouldn't belive how much work was actually involved with that. Cutting out the spare tire well, welding in an aluminum tub, calculating the angles to get the motorization to clear all the suspension stuff and to come down at the precise angle so that when fully extended the tray lays flat on the ground. Every show i have gone to in both the states and canada, people always say to me that it's something they have never seen before. And its fully functional for engine cooling purposes, and it also serves a second purpose, since this is a daily driver, I couldn't put two cryo bottles in the back with the stereo or there would be no room for groceries!!

The a-pillar pod housing the turbo timer and boost controller, most people go with the gauges on the a-pillar. I hand fabricated this to be different and unique and I haven't seen anyone else with something like that either.

The custom dash bezel for the dvd player and gauges.


MODS LIST

ENGINE
Spool tubular manifold
Garrett T3/T4 turbo
Pauter forged rods
Weisco Pistons
Mazdaspeed intake/exhaust cams
NGK spark plugs
440cc injectors
Turbonetics wastegate
Vortech FMU
Flying Miata voltage clamp
Nology ignition wires (2 to 4 wire conversion)
Spearco intercooler
Walbro fuel pump
Mandrel bent stainless steel exhaust
Magnaflow hi-performance muffler
AWR engine mounts (88 durometer)
Custom cold air intake
Custom engine grounding system
Custom milled chrome battery tie down
Custom milled chrome radiator shroud
Chrome catch can
Chrome valve cover
Custom milled oil cap
Optima battery

TRANSMISSION (automatic built to hold 300whp)

Upgraded valve bodies
Upgraded governor
High performance transmission cooler
Upgraded torque convertor

SUSPENSION

D2 racing coilovers (36 way adjustable)
AWR endlinks
AWR front control arms
Cross drilled/slotted rotors
18" Niche F16 rims - rims for sale, new rims arriving April (WORK Meister S2R 18" Black Chrome)
Kumho Ecsta 35 series tyres - New tire sponsorship for 2006(TOYO Proxes T1R waiting for rims to arrive)

ELECTRONICS

Dakota Digital volt meter
Dakota Digital amp current meter
Blitz FATT turbo timer
Blitz SBC-id Electronic boost controller
J&S Safeguard knock control system

EXTERIOR

Sunburst yellow paint with custom gloss black two tone w hand laid pinstriping
Gemini reverse cowl Kevlar hood w. custom painted logos
Shaved and debadged
Headlight conversion to black JDM style
Wings West front bumper with shaved side markers
Wings West side skirts
Buddy Club rear bumper
20% black tint
Varad undercar LED neon kit

MULTIMEDIA

Clarion VRX935 DVD player
Dual Clarion headrest monitors
JL Audio XR components
JL Audio amplification
JL Audio 10w7 subwoofers
Custom amp rack with brushed aluminum accents
Amp rack with custom side lit logos
Phoenix gold zero point wiring and distribution
6 LCD screens throughout the car
Gaming via XBOX 360 and PS2

CUSTOM STUFF

Hand built gauge pod/DVD trim plate. Removed or relocated pieces inside the dash to allow extra 1.5" depth for flush mounting DVD player so it doesn't stick out. Also required fabricating a custom mounting bracket for the DVD player.

Hand built A-pillar pod to mount boost controller and turbo timer. Pod texture coated and painted to match the factory interior.

Full DEI Cryo2 Cooling system. All mounted in a custom motorized bumper enclosure including 7" LCD screen

Doors have been rebuilt and painted to include 3 way JL audio component speakers as well as 7" LCD screens.


Latest pictures (guess if it ever stops raining here I'll have to hurry and get some real good pictures done up)

New rims being built in Japan. Apparently these things are built to order, so i have to wait 2 months (new arrival date estimated April 6th) 18" Work Meister s2R

Magazine feature article. Performance Auto & Sound Feb 2006

Engine. All cleaned up and ready to roll.

Chrome CP racing strut bar

LCD screens in doors all hand built

Mazdaspeed seat swap

Reverse logo's in kevlar

Shaved and debadged

Hand built A-pillar pod

Hand built gauge pod and dvd mounting

Custom stereo setup

Fully motorized bumper with CRYO cooling and LCD screen. This is designed to be completely flush when closed, you won't even know its there.

Cutout spare tire well

Feel like cutting a bumper up???

Aluminum box taking shape

Forming the bumper and feather edging

CP racing strut bar (pre-chrome) and D2 racing coil-overs

Back when I was riding on air!!

Votes would always be appreciated!!

 

[ChopstickHero]

^^^
WINNAR.

 

[GHOSTWHISPER]

word to that

 

[jsgolfer]

can we please DQ anyone with TVs in there car?

 

[thasilver3]

daaaaaaaaaaaaaamn bigwoofer that s*** is crazy

 

[Mutmatt]

i have a tv... in the trunk... that belongs in my room... not working lol

 

[ghost]

Well this would have been more fun in another month and a half when my work rims arrive!!! Also next week my car goes in to a local guy here who specializes in hot rods, for some custom hand laid pin-striping. I have a whole new dash coming in from the local wreckers here and i'm completely remolding my dash as well.

MODS LIST

ENGINE
Spool tubular manifold
Garrett T3/T4 turbo
Pauter forged rods
Weisco Pistons
Mazdaspeed intake/exhaust cams
NGK spark plugs
440cc injectors
Turbonetics wastegate
Vortech FMU
Flying Miata voltage clamp
Nology ignition wires (2 to 4 wire conversion)
Spearco intercooler
Walbro fuel pump
Mandrel bent stainless steel exhaust
Magnaflow hi-performance muffler
Custom cold air intake
Custom engine grounding system
Custom milled chrome battery tie down
Custom milled chrome radiator shroud
Chrome catch can
Chrome valve cover
Custom milled oil cap
Optima battery

TRANSMISSION (automatic built to hold 300whp)

Upgraded valve bodies
Upgraded governor
High performance transmission cooler
Upgraded torque convertor

SUSPENSION

D2 racing coilovers
AWR endlinks
AWR front control arms
Ingalls camber kit
Cross drilled/slotted rotors
18" Niche F16 rims - rims for sale, new rims arriving April (WORK Meister S2R 18" Black Chrome)
Kumho Ecsta 35 series tyres - New tire sponsorship for new rims (TOYO Proxes T1R)

ELECTRONICS

Dakota Digital volt meter
Dakota Digital amp current meter
Blitz FATT turbo timer
Blitz SBC-id Electronic boost controller
J&S Safeguard knock control system

EXTERIOR

Sunburst yellow paint with custom gloss black two tone
Gemini reverse cowl Kevlar hood w. custom paint
Headlight conversion to black JDM style
Wings West front bumper with shaved side markers
Wings West side skirts
Buddy Club rear bumper
20% black tint
Varad undercar LED neon kit

MULTIMEDIA

Clarion VRX935 DVD player
Dual Clarion headrest monitors
JL Audio XR components
JL Audio amplification
JL Audio 10w7 subwoofers
Custom amp rack with brushed aluminum accents
Amp rack with custom side lit logos
Phoenix gold zero point wiring and distribution
6 LCD screens throughout the car
Gaming via XBOX 360 and PS2
CUSTOM STUFF

Hand built gauge pod/DVD trim plate. Removed or relocated pieces inside the dash to allow extra 1.5" depth for flush mounting DVD player so it doesn't stick out. Also required fabricating a custom mounting bracket for the DVD player.

Hand built A-pillar pod to mount boost controller and turbo timer. Pod texture coated and painted to match the factory interior.

Full DEI Cryo2 Cooling system. All mounted in a custom motorized bumper enclosure including 7" LCD screen

Doors have been rebuilt and painted to include 3 way JL audio component speakers as well as 7" LCD screens.


Latest pictures (guess if it ever stops raining here I'll have to hurry and get some real good pictures done up)

New rims being built in Japan. Apparently these things are built to order, so i have to wait 2 months

Other pictures

LCD screens in doors all hand built

Mazdaspeed seat swap

Reverse logo's in kevlar

Hand built A-pillar pod

Hand built gauge pod and dvd mounting

Fully motorized bumper with CRYO cooling and LCD screen

CP racing strut bar (pre-chrome) and D2 racing coil-overs

Holy s***!!! Thats the baddest P5 I have ever seen!(first)