Bang for the buck mods on stock MSP

[hotrodf1]

I did this. I am polishing it up and smoothing out the surface a bit. I am gonna have a friend powdercoat it to match the metallic silver that my FMIC piping was done. The only problem I am running into is the EGR setup is a bit different. The MSP egr will come up a couple inches short. I am trying to get a part number on the one I need. I am thinking it is from a 626 also. Just not sure.(dunno) Anybody got an idea of what I need???????

The manifold to get is the 2000 and up 626 4 cyl. manifold right?

Is there any particular year that works best? I have heard that I need to get the EGR piping from the donor car as well.

BTW, thanks all for the replies and info!

 

[hotrodf1]

If your not ging to pickup the unichip grab the afc. You defanitly need some sort of ems with these cars.

Like DSM AFC? It seems for $320 that wouldn't be a bad deal.

 

[hotrodf1]

probably slsperformace. i dont know anything about there products but if i could go back and do it again, i would definitely go with the same setup.

haha! You're right. It IS SLS now that I check on my home terminal. Their exhaust looks pretty decent - anybody know anything about them? The prices seem pretty good.

Look at the motor mount they have:

Oops site is down for maintenance. ANyhow, their front mount is beefy. ANyone use it? (dunno)

 

[69RMSP]

it'll also be for your best interest... trust me it'll help get those afr's to a safe number...

Like DSM AFC? It seems for $320 that wouldn't be a bad deal.

 

[dman555]

Part # For 626 Mani- Egr Tube--doug

part numbers needed for installation
FS1G 13 100 - manifold
FSJ2 20 310A - egr tube
FSJ2 13 111A - gasket
FS01 13 655 - gasket