AWR Passenger side motor mount - 70 durometer - barely used - $160 shipped

[Dimitrios]

I bought a set of AWR trans and passenger side mounts in the summer and got around to installing them in September and decided that the inclusion of the passenger side is just a bit too much vibration, noise than I'm willing to put up with. I will miss the lack of engine slop and improved throttle response though.

I have about 500 miles on this one and is up for sale.

Asking $160 shipped ($20 off the $180 on PG http://protegegarage.com/1527-product-1527.html. I can't find them on Tony's AWR site).

Dimitrios
773 316 1447

SOLD

 

[Pmpkinhead]

I got first dibbs, PM sent. What is pic 2? Looks like two parts?

 

[NEWBMAZDA]

if it were 88 duro i would get it... but GLWS

 

[Dimitrios]

@ Pmkin: it's technically two pieces connected with that large shoulder bolt, but you install it as one (though you could install each piece separately). Either way, a bit of a support on the oil pan with a jack and a 2x4 block of wood makes it a quick 15 minute install.

The trans/driver side is staying in however.

@ NEWB. AWR sells the various flavors of 1.5" and 2" bushings separately for the firewall/front and the pass, drivers side mounts, respectively. About $15 per bushing (note, not inserts).

 

[Dimitrios]

Can someone close this thread? Item sold.

 

[Pmpkinhead]

Whats the diff between Inserts and Bushings? What does the MM have that I bought?

May as well leave this thread open for us newbes to get info, a lot of good info to come!

 

[Pmpkinhead]

I installed it (Passenger Side MM) today and took it for a 1 mile test drive. It feels good and no add'l vibration so far. I already have front and back MM replaced with AWR's ("Automatic" Hardness) and the Tranny MM is still stock. I'll give more feedback after I get some miles on her.

Update: I drove about 20 miles today and the firmness seems to help with shifting AND hesitation, everything is just so much smoother! Still no additional vibration!

 

[Dimitrios]

Good to hear. Thanks for the quick sale.

I'm keeping the tranny side as that helps; I think the combo was just a bit much for me to handle. You'll enjoy it.