AWR endlink ?

[PHSMsp04]

Last week i installed the eibach sportlines and adjustable front endlinks. I drove around and noticed it was making a clunking noise later to firgure out that one of the endlinks wasnt tighted all the way. Well i tighted it up and the noise went away. well now it only makes the sound when i turn the wheels to the left. Was wondering if other that have the endlinks have had this problem?

 

[xelderx]

The front endlinks from AWR don't have as much clearence as the stock endlinks because of their larger design and limited rotation in the joint. On my setup the actual bar was hitting the mount on the strut when the wheel was turned. I had to make some custom spacers to move the endlink away from the mount a little. I had to remind myself that the endlinks were originally designed for the World Challenge Proteges. Roadracing under normal conditions doesn't require the driver to turn the wheel as much as a street driven car.

 

[BondoBob]

I just ordered front and rear endlinks from AWR for my MP3...what do I need to do to "fix" these?

 

[xelderx]

I just ordered front and rear endlinks from AWR for my MP3...what do I need to do to "fix" these?

The backs won't be a problem. The fronts are what you should look closely at when you install them. When you get them on have a friend turn the wheel all the way to both sides and see if the endlinks hit the mounting tab. If they do you just need to get some small spacers or something to move the joint away from the mounting tab. You'll see what I mean. The mounting bolt is more than long enough to move it away from the tab.

 

[PHSMsp04]

Thanks. Ill have to go look at it today.