Anyone use the ATP MAF housing?

[Andrade08]

The ATP MAF housing they use on their Mazdaspeed3 intake kit.

The housing is ATP-FLS-077 $95. I am going to use this to make my own intake setup. If it works that is.

 

[Craighjr]

I have one by turbo xs do you need it? It is the MAF housing and 3" dry flow filter.

 

[Hypnotized]

Are you selling your TXS one?

 

[Craighjr]

SI, but someone grabbed dibs already. Sorry to sound like an indian giver here with the offer. I can post pics with the corect format in the sale forum as well if the admins like.

 

[Hypnotized]

I got seconds then. Let me know, im in CT.

 

[Craighjr]

OK I was asked to hold it till Wed. Sorry to jack your thread. I was thinking that the ATP 3" turbo inlet with a maf housing like this would have made a sweet full intake system. I am overspending my butt off so I am tuning my car after a fuel pump and leaving it alone for a bit.

 

[Hypnotized]

Did it thow a CEL?

 

[udontknowjack]

(jacked)

 

[Andrade08]

Ah.........thread jackings are OK by me. It's still pretty much topic related anyway. Not like anyone started talking about tires or bird migration routes! lOL!!

 

[CaSHMeRe]

Ah.........thread jackings are OK by me. It's still pretty much topic related anyway. Not like anyone started talking about tires or bird migration routes! lOL!!

if the ATP MAF housing is a true 3" ID (inner diameter) like the MAF housing they make for the MS6, you are going to have real issues with fuel trims ... just a word of caution.

EDIT: ATP's inlet pipe kit looks awesome and should have so real good gains as well ...

Found here:
http://www.atpturbo.com/Merchant2/m...OD&Product_Code=ATP-MS3-003&Category_Code=MS3

 

[RonTonkinMazda]

if the ATP MAF housing is a true 3" ID (inner diameter) like the MAF housing they make for the MS6, you are going to have real issues with fuel trims ... just a word of caution.

EDIT: ATP's inlet pipe kit looks awesome and should have so real good gains as well ...

Found here:
http://www.atpturbo.com/Merchant2/m...OD&Product_Code=ATP-MS3-003&Category_Code=MS3

I Have this and no current intake out will attach to this i had to tuck my cobb intake inside the damn pipe! but overall i like this part as the stock one looked very restrictive!

 

[CaSHMeRe]

I Have this and no current intake out will attach to this i had to tuck my cobb intake inside the damn pipe! but overall i like this part as the stock one looked very restrictive!

really ? that stinks. u would think if it fit the stocker, it would fit Cobb since their's fits the stocker ... hmmm...

 

[Andrade08]

This kit will bolt up to the stock air box on a MS3 but with the Cobb I think guys are buying the inlet pipe kit with out the 45* coupler you see there. Cobb's blue coupler is sized to fit the stock inlet pipe which is a smaller diameter than the ATP inlet pipe and that is why it's a no go. Now if you have the Cobb and get he ATP with the 45* coupler I think the coupler will fit on the Cobb MAF housing............I think.