anyone heard of a toto rear discharge downpipe

Status
Not open for further replies.
justhavnfun mods:
2007 ms3 black 320 whp 375 ft lbs heavy mods/
16" castex, vitron forged speedgates, wdd, dimpled hydro coils, .30 over gimmel bearings. fgl air box/ TCBY, ZAS,banjo mod, 2 stage recirc DDT1500, split fuel tank with remote valve. dwell windage diverter. tuned by lezly c. walker dynamics. RACING BEAT ONE EXHAUST (all hidden)
dyno'd 8/20/07

rumble rider's mods:
07 M3 SPD 367whp 382tq dynoed tested by reggie at noland speed & custom. toto rear discharge downpipe with 5"straight ss304 piped out the back with kevlar skid plated done by helgie at macon mech.30over merc gimblebearing, banjo mod, B&G autofeed fastfill valve, tcby, sst-5, zzr sleeves, cts, tuned by lezly c walker dynamics, pillar gauges fuel pressure, boost & pyro gauges, costom polycarbonate koleman zzr airbox.

WTF? :bs:
 
justhavnfun mods:
2007 ms3 black 320 whp 375 ft lbs heavy mods/
16" castex, vitron forged speedgates, wdd, dimpled hydro coils, .30 over gimmel bearings. fgl air box/ TCBY, ZAS,banjo mod, 2 stage recirc DDT1500, split fuel tank with remote valve. dwell windage diverter. tuned by lezly c. walker dynamics. RACING BEAT ONE EXHAUST (all hidden)
dyno'd 8/20/07

rumble rider's mods:
07 M3 SPD 367whp 382tq dynoed tested by reggie at noland speed & custom. toto rear discharge downpipe with 5"straight ss304 piped out the back with kevlar skid plated done by helgie at macon mech.30over merc gimblebearing, banjo mod, B&G autofeed fastfill valve, tcby, sst-5, zzr sleeves, cts, tuned by lezly c walker dynamics, pillar gauges fuel pressure, boost & pyro gauges, costom polycarbonate koleman zzr airbox.



WTF? :bs:


I suspected their bulls*** already and called Rumbleboy out on the 12.7 sec thread on the MS3 welcome forum.
 
Most likely these are the same guy. Either that or they do hook up outside this forum for their sigs to be so similar.
 
Most likely these are the same guy. Either that or they do hook up outside this forum for their sigs to be so similar..[/QUOTE

He wishes he were me, I don't know justhavinfun. Just cause Lezly tuned both our cars doesn't mean I know him. Lezly Chang is very well known in speed circles in the mid atlantic area. I made a mistake, the downpipe is a rear discharge. It is just called a Toto downpipe. You have to get it a brick and mortar speedshops, not online]
 
Last edited:
I'm sure there's quite a few others on here that think the same about these two but don't want to say anything for the very reason you mentioned.

Doesn't matter though. I get a kick out of reading their nonsense (stfu)

whats the point of dumping any money in a mitsub eclipse?! at the end of the day iT's still slow as s***. Ripps is the only people who have had any luck with the eclipse and they're even un reliable.
 
whats the point of dumping any money in a mitsub eclipse?! at the end of the day iT's still slow as s***. Ripps is the only people who have had any luck with the eclipse and they're even un reliable.

That is one of the funniest, full of BS, things I have heard in a long time.
 
lol tcby upgraded fuel aux pump. isn't tcby a back in the day ice cream shop that no longer exist?
 
[threadjack]

lol tcby upgraded fuel aux pump. isn't tcby a back in the day ice cream shop that no longer exist?

There's a TCBY (The Country's Best Yogurt) near me but, yeah, I think they're the last holdouts of a bygone era. :) If you're that worried about calories and you're going to have a yogurt with 250 or so, splurge the extra 100 and get some damned ice cream from a nice local establishment that makes their own. In the long run you'll be MUCH happier with your purchase and the taste buds will thank you. Like asking if you want a Steak and Shake milk shake or a McDonald's frozen milkfood product; wait the extra 17 minutes in the Steak and Shake drive thru, pay the extra $7 (hehe) and really /actually/ enjoy your splurge of carbs and fat!

[/threadjack]
 
wtf is going on here???

thread closed until i can either clean it up or put it in the dumpster...
 
Status
Not open for further replies.

New Threads and Articles

Back