any carbon fiber needs

M

mhl0521

Member
Can you guys syuggest any pieces or improvements for any carbon fiber/kevlar pieces. We are a composite shop in metro Atlanta and offer very high quality epoxy resin, vacuum bagged and heat cured pieces. We can also do kevlar inlays which look pretty cool. Also Carbon and colored kevlar weaves. Our background is primarily motorsports and we are expanding into the street market.
Any input is greatly appreciated.
 
Since this is your first post, can we get some more info on the shop? I have a few ideas that I would like to see happen on my show car. Please contact me at the email below.

Pe@ce
 
Well....Hmmmmm my Wish List..... The whole interior Carbon Fiber.... all the trim pieces, and I mean actul trim pieces not just some carbon fiber stick on piece that covers the actaul trim! I know that will probably never happen but if it was there I would buy them.
 
carbon fiber

The web site is in the works...will try and have something up at least to have some pics in a couple of weeks. The manufacturing company has mostly done race car pieces for the past 30 years. I am starting a new company to market street pieces they will manufacture.....Composite Werks. Just trying to figure out which cars/market to start out with.
 
trim pieces

99toppro4u said:
Well....Hmmmmm my Wish List..... The whole interior Carbon Fiber.... all the trim pieces, and I mean actul trim pieces not just some carbon fiber stick on piece that covers the actaul trim! I know that will probably never happen but if it was there I would buy them.
Click to expand...


Well, it could happen, it will just be a matter of what people are willing to pay. We can make nearly anything out of carbon. Even "billet" carbon fiber that we can lay up into blocks and CNC machine!
I will spend some time at the local Mazda salvage yard and see if we can come up with cost estimates on interior pieces that I might post.
 
Full CF mirrors not covers like the ones from DG motorsports, CF door handles on the inside to replace the silver ones, CF door pillars for the windows on the outside, and a CF deck lid, CF autoexe wing and CF roof rack filler strips someone please make these!!
<!-- / message --><!-- sig -->
 
Different design front lip, invader style cf hood, radiator support cover, and oh yeah, feel free to use my car as model, hehe. Where's your shop located in Atl?
 
since you can do vacuum bagging and making molds i would say make the interior pieces. like someone else said actual interior pieces not stick on type. there's only a few companies on the market that have products only close but it'd be a good change to have a choice. also, the usual pieces like a DIFFERENT style hood and lower lip and maybe even an OEM trunk lid.

the hottest cars on the market i would personally say (besides the protege) the higher end bunch: mitsu evo, subaru wrx/sti (market is getting flooded though so unless you can provide something REAL unique and market it good then it won't sell good), Infiniti G35 (not too much stuff out there and quite a few owners are looking for things like this and more then most willing to spend the $$), Nissan 350Z (like the subarus there might be a flood of the market) and the rx-8 might get thrown in there as well rounding out the pack. another craze you could hop on to if you make and market the right products for the right cars is the "drift craze". if it's a cool product PLUS it's carbon fiber more then likely people will buy it just to show it off. =P
 
since you can do vacuum bagging and making molds i would say make the interior pieces. like someone else said actual interior pieces not stick on type. there's only a few companies on the market that have products only close but it'd be a good change to have a choice. also, the usual pieces like a DIFFERENT style hood and lower lip and maybe even an OEM trunk lid.

the hottest cars on the market i would personally say (besides the protege) the higher end bunch: mitsu evo, subaru wrx/sti (market is getting flooded though so unless you can provide something REAL unique and market it good then it won't sell good), Infiniti G35 (not too much stuff out there and quite a few owners are looking for things like this and more then most willing to spend the $$), Nissan 350Z (like the subarus there might be a flood of the market) and the rx-8 might get thrown in there as well rounding out the pack. another craze you could hop on to if you make and market the right products for the right cars is the "drift craze". if it's a cool product PLUS it's carbon fiber more then likely people will buy it just to show it off. =P

good luck hope to see more of your company around here
 
I would like to see CF oanels for inside the engine bay to clean things up, like in that custom p5 that was posted a while ago that was all custom and in the gnine bay they had CF panels overing most of the stuff up. I was thinking of doing this with hi end aluminum sheets and CF sheets on top but 100 CF would kick ass.

Ill see if I can find the pic. and fitment/design should be easy since they are relatively flat.
 
another question.. does your resin stink like poo? the one used for my CF hood does lol and I CANT GET RID OF IT
 
I would like to see color carbon fiber interior peices and actual body kits/ I have a buddy with a beamer with a carbon fiber kit that is cool as s***
 
shop

thewrench said:
Different design front lip, invader style cf hood, radiator support cover, and oh yeah, feel free to use my car as model, hehe. Where's your shop located in Atl?
Click to expand...

manufacturing in Dawsonville area.......
 
Please log in or register to reply here.

New Posts and Comments

DarkskiesIL
Higher-output alternators or DC power options for CX-5?
Replies
8
Views
264
DarkskiesIL
DarkskiesIL
DarkskiesIL
New 2025 CX-5 with highway vibration problem; tires?
Replies
15
Views
475
DarkskiesIL
DarkskiesIL
S
  • Question Question
Miss or random miss fire
Replies
2
Views
73
N7turbo
N7turbo
أ
Radio rds upgrade mazda6 2016
Replies
0
Views
35
أمين
أ
K
    • Like
  • Sticky
What have you done to your CX-5 today?
478 479 480
Replies
10K
Views
2M
kantry123
K
U
2008 CX-9 Windshield Replacement and worried about BCM
Replies
1
Views
149
Bronco Boy
Bronco Boy
View more…

New Threads and Articles

Back