any 06-07 suby lip fit MSP?
- Thread starter 2003.5_MSP
- Start date
mynameisdaniel
Member
- :
- Mazda 323 Protege SP20
Doesn't look particularly bad, to me it seems like the fins near the wheels are at too much of an angle, should be parallel with the side of the bumper. Got any other pics from a 3/4 kind of view? 
AzteCypher
black ops modifications..
- :
- 2001 Mazda Protege LX
Subbin...
mynameisdaniel
Member
- :
- Mazda 323 Protege SP20
Same as mine, but is that CF?
No is POLY URETHANE
steffenaj14
Member
- :
- Mazdaspeed Protege
i think its just the angle of the camera
IMO the STI lips look wayyyyy better with a 03.5 lip installed.
the overall shape doesn't flow that great without it... it looks like a lip for another car mounted to the bottom of a bumper. whereas with the 03.5 lip, it flows great/aligns perfect and looks like it was actually made for the MSP.
mynameisdaniel pulls it off the best for the non 03.5 lip though.
going back and looking at pics of those who have the $300 JDP CF lip and even the "JDP Replica" $150 lip - i think the STI actually lip looks better!
the overall shape doesn't flow that great without it... it looks like a lip for another car mounted to the bottom of a bumper. whereas with the 03.5 lip, it flows great/aligns perfect and looks like it was actually made for the MSP.
mynameisdaniel pulls it off the best for the non 03.5 lip though.
going back and looking at pics of those who have the $300 JDP CF lip and even the "JDP Replica" $150 lip - i think the STI actually lip looks better!
super1chow
Member
- :
- 03 Mazdaspeed Protege
Well for 50 bucks, i cant complain that much. I wish i had the 3.5 lip but dont want to loose my fogs and they're hella hard to come by these days. Gonna do some adjustments to the lip when i get some free time.
you can make fogs fit with the 03.5 lip... i'm planning on doing it in the near future.
hornsfan10609
Certified Mazda Tech
- :
- 2003.5 Mazdaspeed Protege x2
I would rather try to find a set of fogs than an 03.5 lip.
Just got the STI lip on my 03 MSP!
What do you guys think?
see, now i really like that a lot.
2003.5_MSP
Member
- :
- 2003.5 MSP
Just a hint if u want fogs with 03.5 lip, if u want to not cut lip then get some 4" diameter eBay fogs... That's what I did and didn't have to cut anything
bikingpro5
Member
- :
- 03 Protege5
So here's mine.
Was thinking about removing the center flap on the lip, but I decided to just leave it the way it is.
pics don't show up
mynameisdaniel
Member
- :
- Mazda 323 Protege SP20
Yours doesn't seem to sit very flat, especially in the middle because of that flap you mentioned. I think if you slide the front a few cm further under the car does it not match up with a ridge in the bumper and raise the middle?
mynameisdaniel
Member
- :
- Mazda 323 Protege SP20
You mean the useless thing that's on the car right? If so yes, but from the looks of it you might have to screw the lip in again to get the ridge on the lip to fit up behind the front of the bumper.
steffenaj14
Member
- :
- Mazdaspeed Protege
do you guys think this lip will work on a bc2 front bumper?
