2.0t03speed
Member
- :
- 08.5 CWP Speed 3
=)
505 Intake Manifold COMPLETED!
- Thread starter 505zoom
- Start date
- Status
you guys are crazy in here - you at like he's selling crack lol....
There's something you don't know about me MS_Rick...
Jaysanooch
Member
- :
- 2003.5 Msp
I still have a hard time visualizing this IM...was there a rough draft posted somewhere?
wow this s*** is f*cking hilarious (rofl)
There's something you don't know about me MS_Rick...
Only 20?! I'm really going to have to keep a close eye on this! I have the $300 ready and waiting, I'm just afraid like the two days I decide not to check the forums will be the days payment opens. Knowing my luck, lol...
2.0t03speed
Member
- :
- 08.5 CWP Speed 3
and if you read jon he said this part will be very likely limited to the 1st run. so are this there proabbly wont be another one. hop on it while you can
workin on that (second)
so whats up with the egr? is it gonna work or not in the stock location? i know you said earlier that a little modification would have to be done because of the different TB location...any other modifications to keep the CELs away? That is one of the main things im concerned with (no CELs)...badass product though...will have to try all possible routes to fight off CELs haha
2.0t03speed
Member
- :
- 08.5 CWP Speed 3
rich has found a way to fix the egr me and him were talking about this last week.
2.0t03speed
Member
- :
- 08.5 CWP Speed 3
and your going to have to modify your cold pipe for the new throttle body location. your best bet is going to be to cut off the end section of the cold pipe and put a 90 degree silicone coupler there.
2.0t03speed
Member
- :
- 08.5 CWP Speed 3
if you look back on page 15 and see the pictures 505 posted you can get a visualization of what its going to look like. but as far as any paper drafts go rich hasnt posted up any.
2.0t03speed
Member
- :
- 08.5 CWP Speed 3
yea its going to look nice when its done. rich said hes gonna polish up the new floor plate today and take new pictures of it with the 10mp camera so stay tuned for some more pictures tonight. the stacks look like fat round doughnuts now lol
2.0t03speed
Member
- :
- 08.5 CWP Speed 3
yea im gettin ken to do my head. just got to buy the valve springs and the integral cams i have a spare head and oversized valves allready
mines at a master minded machine shop, they do big time s***, they're stage one port is equal to most stage three ports, they make they're own valves, retainers and springs too, it's pricey but just his porting job delivers +/-70whp
- Status
