2002 protege5 recent swap now no fuel pressure

betting101

Member
:
2002 protege5 manual
hello new to mazdas, i picked up a 2002 protege5 with bad 2.0 engine. i swaped in the jdm motor used all usdm parts intake mani, etc.. only part i left on was the crank sensor. car turns over but has no fuel coming up. i didnt bother to start the car before pulling the motor, but can say it did have small amount of fuel pressure in the lines when i took out motor. I cannot here the fuel pump prime with key, i did check relay and swap it with a working ac relay. any help would be appreciated.
 
ok i figured out the problem, when using the jdm fsde u must swap out the crank pulley with the usdm pulley and sensor. anyway to close this? thanx.
 

New Threads and Articles

Back