1 week to get as many mods done as possible

[Familia323]

We have Ziebart down here in Champaign. The guys that get tint stuff done to their cars go there. Have fun with your new P5. Just remember that it isnt a cavalier or a GM product, so the same rules dont apply. I have eibachs on my sedan and you can hardly tell the difference from stock. And one more thing, to avoid sounding like a n00b, it's "header" as in Exhaust header. No "S". Anyway, good luck with your car and hopefully see you at the May Meet.

 

[NRRfrogmanP5]

i have some of the radio removal tools somewhere..there are like 4 bux for 4...from pepboys and u will need 4

 

[shareef777]

got a part number from pep boys?

 

[NRRfrogmanP5]

they are in the radio instalation section.....they are called oem radio removal tools.....they are like 2 metal U's and u need to packs..i dont know the part #

 

[shareef777]

well, since i start school Monday and my life will offically be over. i plan on taking the rest of eternity to install my system. there's just too much s*** to get done.(uhm)

once i get the tints and cat-back done tuesday, i got to start looking to customization for the system in the trunk. i've got to mount my 3 10's, an optima battery, an isolator, a cd changer, and a bd1500 amp. i guess i'm at the point when i over whelmed myself and need to take a breather. (freak)

 

[shareef777]

well my car is at the tint shop right now, and while there i went out to get the radio kit to hook up the new pioneer. the guy at best buy says they don't have the kit for the P5, and the guy at circuit city gave me one that doesn't work with the car. does anyone have a place i can pick up one of these radio kits for the P5? i did however find a pocket for the stock hole, but nothing to mount a single din radio on top of the pocket.

 

[JOS3]

www.protegegarage.com

you can get the pocket from the mp3/msp (the one with the flip down storage pocket)

it does cost more than a typical pocket though

 

[JOS3]

or you could try tweeter

 

[shareef777]

actually, i already have the pocket. now i need the bracket that goes above the pocket to hold the radio itself.

 

[Mr. Win]

umm there should be a little nub the screws into the back of the pioneer. Then you slide it in bend the metal tabs and you set. click the pocket in and thats it.

 

[shareef777]

so the pioneer doesn't need any type of special bracket?

 

[Mr. Win]

nope sits right in the snap the pocket above it

 

[shareef777]

well, i've spent the past 3 hours trying to remove the stock radio to no avail. I tried sticking some hanger wire through the holes, but they run straight in. I don't feel nothing when I put the wire in, it just keeps going through.

 

[NRRfrogmanP5]

well if ur free saturday we can take it out for u

 

[Mr. Win]

you need 4 din removal tools

 

[Aricjm15]

you need 4 din removal tools

I did it by reaching around from the back and pushing on the clips, dont ask me how I did but thats how I did it

 

[Captain KRM P5]

I did it by reaching around from the back and pushing on the clips, dont ask me how I did but thats how I did it

thats aric for ya, always willing to do the reach around

 

[Mr. Win]

haah he knows whats proper gaga

 

[Captain KRM P5]

haah he knows whats proper gaga

silly silly senor corwin up to his humARous triCX again

 

[JOS3]

you are all sick *****