Search results

  1. A

    2003.5 Laser Blue Msp 97xxx miles

    2003.5 Laser Blue Msp 97xxx miles Selling my daily driven 03.5 Laser blue msp. It runs very good, motor pulls strong and hard and turbo has no shaflt play, has been my daily driver for the last 3 years and has never given me any problems. I have driven it on very long trips before without any...
  2. A

    New Protege 95A filled front motor mount

    I have a brand new front motor mount that i filled with 95a durometer urethane that i had left over from filling my other mounts. Mount is stiff and will cut down on wheel hop and improve throttle response alot. I notices a huge different when i installed only my awr 95a front motor mount when i...
  3. A

    Greddy Type R bov with pipe

    Im selling my greddy type R with standard spring and pipe. Works perfect and sounds good. This bov has been discontinued for some time now and go for $300+ on ebay. I can also include the coupler i used for recirc. $175 shipped
  4. A

    Anybody know this shift knob?

    Does anybody know where to get this shift knob or one like it?
  5. A

    Hks ssqv bov

    Selling my authentic ssqv v1 with adjustment screw because i dont use it anymore. Works perfect, no leaks at all and didnt surge when i used it. Has light scratches and scuffs. Comes with flange on a pipe. $80 shipped or best offer
  6. A

    Msp ssafc meth injection map?

    Anybody have a ssafc map they tuned for meth? Im curious to see what other people tunes are
  7. A

    WTB JoeP Fcd

    Looking for a joep fcd, let me know shipped to 95843, thanks
  8. A

    WTB Greddy type-R

    Looking to buy a greddy type-r, not rs or type s. Let me know shipped to 95843
  9. A

    Mazdaspeed Protege Heatshield

    Selling my stock exhaust manifold and heatshield because i upgraded to a thunder manifold and dont need this anymore. The manifold had 2 small cracks that didnt go through all the way and they have been welded, other than that nothing wrong with the manifold at all. Asking $100 shipped or best...
  10. A

    Msp intake manifold with VTCS deleted

    Bought a 626 manifold a while back so this needs to go. Vtcs has been deleted and the holes have been JB welded, Intake runners have been polished and also comes with egr line and fuel rail. $80 shipped obo
  11. A

    wtb laser blue protege front fenders

    My front fender on my msp were some bad aftermarket fiberglass fenders the cracked so im looking to replace them. Let me know what you got
  12. A

    Bosch universal downstream o2 sensor help

    I bought a universal downstream sensor with only one wire on it. How do i wire this up to get rid of the cel so i can get smog? Currently it gives the p0138 and p0038 codes, p0038 is for the heater on the o2 sensor but when i have the 2 black heater wires and the 2 other wires connected to the...
  13. A

    Any way to adjust msp idle?

    Ive searched and all i found was some people saying you can and people saying the ecu will change it back to stock. Idle right now is at 700 but i would rather it be about 850 or 900, anybody know a way i can raise the idle?
  14. A

    Any meets or people with msps in sacramento area?

    Never really hear of any mazda meets in sac area and i never see people with msps out here. Anybody know of anything?
  15. A

    Tein S-tech Springs

    Selling my tein s-techs from my msp, they are pretty much brand new. I drove to school on them like 2 or 3 times then took them off and put Ground Control sleeves on. They ride good, not too bumpy and have a decent drop. There a little dusty and have just been sitting in my garage since i took...
  16. A

    WTB Rear Passenger side Tokico hp for msp

    My right rear strut is blown and may be broken somehow because it doesnt go low with ground controls set all the way down so im looking to replace it with a used one. Dont have the cash for a new one right now. Somebody give me a good price
  17. A

    Cant adjust ride height help

    I got ground control sleeves on stock msp tokico struts and the rear right strut wont go low with the sleeve as low as it can go but all the other struts will tuck the tire if i want it to. I also think the rear right strut is blown but would that cause it to not go low? no matter how much i...
  18. A

    Help! Cant adjust ride height after GC coilovers install!

    I installed gc coils today and both driver side front and back can be adjusted easily but the right side can not. The struts on the right side wont decompress when i jack the car up so i cant move the perches but the left side decompresses just fine and the left drive side strut is blow(new one...
  19. A

    WTB Skunk2 coilover sleeves

    Looking to get some skunk2 sleeves since im on a budget and cant afford new GC sleeves right now and havent been able to find anybody willing to sell there used ones. Ive heard alot of bad about them but i dont mind a stiff ride.
  20. A

    WTB/WTT for ground control coilover sleeves

    Im looking for some ground control coil sleeves for my msp. If anybody is interested in trading for some Tein S-Techs that i bought new and have less then 300 miles on them lmk and we can work something out. Also if anybody would like to buy these from me then make me an offer. The reason i dont...
Back