Search results

Sure. Exhaust wrap works too in certain spots. Mine was rotting in a places that couldn't easily be wrapped due flange, hanger, or bung. Thought about high temp epoxy too.

The only thing I recall beeping is when you leave the parking brake on. Perhaps you have the ebrake shoes not completely releasing?

It was a great truck. Yeah it was mainly the fact that these items were popping up and I didn't want to keep chasing issues or sinking money into it. I had about 90K miles on it. I'd say be happy that you still have it and it's reliable. Short of the new tech, the comparable CUVs out there are...

He did a pretty good job. I think we either went with larger piping or stainless as an upgrade. Ultimately with the bearing issues, driveshaft joint issue, main seal issue, leaking 2nd transfer case, and some other items, I sold the CX-9. Miss it sometimes though.

Didn't try with the other key card, but on mine, when I press the rubber button on the car doors or lift gate, the LED on the key card will flash but the doors do not lock / unlock or beep. So the request is made to the key card and the key card responds but nothing happens. If I just press the...

Agreed. Likely an alignment problem. Leaky struts possible, but not so much. I'd say ask dealer to verify defect and if so, replace under warranty. Then pay for an alignment from them.

Were you on a track or closed course or unlimited section of the Autobahn? Be careful.

Nope. Need to tow the car to the dealer with the documentation of ownership and they will verify before assisting.

I went this route of fabrication.

Thanks. Read it too fast...

Nice. Thanks.

Maybe this will help you: https://youtu.be/qtXDIvBRp7s

Sorry to hear. Regulator / motor caused fused to blow perhaps?

If it is surface damage, I wonder if a detailer can use his orbital and glass polish to get the clarity back. - Zoomfive

They should consider a larger CX-9 that is the interior volume of the 1st Generation. The current one is nice, but compromised on 3rd row leg space and cargo utility. Mazda won't be able to offer an equal replacement for my 1st Generation in that regard. That said, a 4 seater CX-9 with the...

I'm not certain, but I believe the dealer can enable this for you. ZoomFive

My iPhone connects to the Bose Audio head unit in what feels to be about 10-15 seconds after starting the car. Never actually timed it, but it does not feel any longer than that in my 2008. Actually, you could try on your phone to forget that BT device and on the head unit to delete that paired...

I had two instances of noise intrusion. My sounds come in through two sources 1) the upper rear corner of the driver side window track and 2) the door seal un the same rear upper corner. In both cases, I reshaped the weatherstripping and the noise level improved greatly. You can also replace...

Perhaps check to see that the switch lights up, check fuse is good, check there is power at unplugged seat connector for heat with a multimeter, and check that connector makes good contact when plugged in. If all those things are ok, then the heating element itself is likely bad. Hope this...

I'd move the front passenger seat forward to get a better look. I would probably also engage / disengage the 2nd row seat lever for the 3rd row entry and the fold / recline lever to ensure that it is not causing the slide to be locked out. So try making like you're getting into the third row...