Search results

Thanks for the feedback. I got these long funnels as well. Not sure if the have an 18 inch. Will have to check. I did bought a new set of pan bolts just in case

Thanks for the feedback. Do i need to have like an extender to my wrench to reach the bolt from above? The gray sealant from Mazda was used last time

Hi, I am preparing to DIY my transmission pan leak. This has been removed 2 years ago and it seems to leak still. I got all the parts and just wanted to ensure how to do some steps. 1. Can I remove the bolts on the tranny dipstick from below? or it has to be on the top. hoping I don't need to...

Thanks, everyone. I have changed my rotors and the whistle sounds are gone. even the vibrations while braking. Learned a new DIY maintenance.:)

Should be the mounting bracket. the 17 socket size. Just afraid that I would snap the bolts.

Hi, I am replacing my front brake rotors on my own for the first time. having a hard time removing the brake caliper bolts. Tried to spray some penetrating oil on it and let it soak for some time but still not turning. Would it be safe to use a breaker bar for it? The release turn should be to...

I got this oil sludge around the transmission pan. Thinking i have to clean them first before removing the pan. What product do you use to remove them? Also, have some on the plastic tray from the previous leak. it was not cleaned properly when I had this done on a shop before.

I was trying to remove these push pins too and it seems I will break them. Do you use a special took to remove them?

Awesome.Thanks!

This thing i was not sure if I can reuse since it was 2 years ago that it was worked on. one is open and the other was not. Can i still reuse it?

I have read here that silicone should have a curing time. Maybe that is the reason I still have a leak because I need to get out of the shop once the mechanic is done. Maybe I should do this myself this summer instead. Do I need to replace my bolts as well to be sure? Here are the parts i was...

Thanks for the response. Sorry i put out the wrong numbers. I bought 6 liters and 4.5 was used. I guess i should just buy 5 next time

Hi, Planning to remove my tranny pan again and have it resealed since it seems to have a small leak again. I used the silicone from Mazda last time (gray color). Is that still a good part to use or would an aftermarket be better? How many liters of tranny fluid is needed? I remember buying 4...

Hi, I was trying to change my headlight bulbs. When trying to do the driver's side. I am having difficulty removing the bulb socket since I can only fit one hand in the space to reach it. I don't want to force remove the socket while it's still within the headlight assembly. Any tips on how I...

Thank you everyone for your response. I have already ordered the shocks. Wondering if its safe to drive it this way for the meantime while waiting for the parts.

Thanks for the steps on how to replaced it. Just waiting for the parts now. Do i need a torque wrench to tighten the boot part nut?

Hi, I just noticed a different noise from the rear recently. When i checked. I saw this rubber boot on the shocks being loose. Seems like it got brittle on the top part already. Should I replaced it immediately?

Thanks for the response. I was wondering if tie rods are easy to replace as well. Trying to learn to do this myself. I got some basic tools

Hi, I was checking my suspension to find issues and it seems I can hear a metal noise on the tie rod on the black square in the picture. I also notice that I can move the yellow part with my hand. Is that normal that i can move it? If not, might as well replace it? Any other recommendations on...