Mazdas247 Marketplace

Comes with antenna and all cables. Asking $50 or best offer plus shipping If needed

James Barone Racing Custom Fabrication of Aftermarket Parts & Accessories JBR 3-Way Adjustable Rear Sway Bars $195.00 shipping included!! (Domestic Only) Constructed out of 32mm 4130 Chromoly tubing with 13mm thick solid steel arms, Tig welded inside and out with capped ends. Powder coated in either Red or Black for ultimate corrosion resistance. The JBR Sway Bar Kit Includes: -New Greasable Polyurethane Mounting Bushings & Brackets -Grease -Loctite -2 12mm Lock Washers -Lifetime Warranty -Online Installation Instructions Everything you need to get the job done right with confidence!! Applications Available: 07'-2011 MAZDASPEED 3 04'-2011 MAZDA 3 Sedan and 5 Door 06'-2011 MAZDA 5 Specifications Simulating 1" of body roll: Stock...

The last thread started to get congested, and people were repeatedly asking for the same stuff that was already gone over and over. So, without further ado: Call, text 616 283-8926. email smitty1017@gmail.com or pm me here. First to pay gets item. Transmission spare parts grab bag : All gears, synchros, selector forks, etc. 5th gear has a chipped tooth, bearings are not usable. If you need tranny parts, or want spares laying around, look no further. 150$ gets all of it. (except the housing) Weapon-R hardpipe kit with BOV (permanently) mounted on the cold pipe for dual valve or BOV applications. Purchased for over 400$ and used briefly. 200$ Shipped! ALL 5 seatbelts - Black. 75$ shipped Both radiator fans. 45$ shipped MSP...

UPADTE Need everything gone so make me offers. Dont lowball please though, you know some of these parts are worth MUCH more than what i'm selling them for. I have a few goodies for sale that i was going to put in my P5 but unfortunately my E36 needs a new motor (womp womp). All parts are in near perfect condition and have been very well taken care off. I wanted to do a full MSP-5 type of project but track car problems call =/ Front Racing Beat Sway Bar - $100 Rear Racing Beat Sway Bar - $100 UPDATED PRICE $150 for both PLUS shipping.. OEM MSP Gauge Cluster - $85 (77k Miles in it) UPDATED PRICE $85 INCLUDES shipping.. OEM MSP Heat Shield - $35 UPDATED PRICE $30 INCLUDES shipping.. AWR Front Motor Mount - $50 (almost new) OEM...

MSP rear lip. Will have proper picture with sign first thing in the morning. PM with offers. Looking to by a oem T25R turbo or T28

Factory MSP Turbo. Garrett GT2554R Pulled at 154k No Shaft Play MSP Injen Short Ram intake Bought from another member on here to install on to my car but do to my insurance I can not use it.

MazdaSpeed Intake and Exhaust cam set (SR Motorsports). Mazda intake and exhaust camshaft pair. These camshafts can add up to 15 HP to the 2.0L motor. The Mazda camshaft sets have an increased lift and also in an increase in duration. Already installed in a reconditioned head with new valve seals. $400 shipped https://www.dropbox.com/s/z5rueig1yo6r7h5/DSCN1870.JPG

Brand new in box. Was painted yellow, has been sanded and is ready for paint. This is the "MP3 style" lower skirt, NOT the '03.5 style. Includes all Mazda hardware and instructions. Price does not include shipping, I am in Canada and will ship your method of choice (Post, UPS, FedEx) $160 Paypal: nick.holinski@shaw.ca

Got the msp suspension from a user in Florida on the fb group and never installed because i got a deal on yellowspeed coilovers end links still on front struts and sway bar, will need new end link asking 150 + shipping obo Also have a MSP shift knob. not the best condition ever. lots of scratches. leather is missing as well $25 Protege5 leather knob as well, not great condition either. offer http://i.imgur.com/qGpy9J1.jpg http://i.imgur.com/K9qpxRK.jpg And lastly, was hesitant to even post this, but figured worst is nobody wants it and i can hang onto it ebay catback for protege5 i ran until it split at the resonator. the muffler and pipe without resonator are fine though... if anyone wants this they could just pay...

FS ROCKFORD FOSGATE AMP racingbeat tokico delsing brackets Update 3/10/13 I have some suspension parts for sale Everything is in good working order, just a bit dirty and ugly Tokico blue struts with evotion lowering springs $300 Will sell springs alone for $100. UPDATE new pics of brackets will sell separately with hardware and bushings, all you need is the bar, spent some time reconditioning it and removing surface rust- SOLD Rockford Fosgate p5002 amp brand new still sealed $150 or best offer Later to come Awr adjustable end links (as soon as I find the other one) Shoot me pm and ill consider reasonable offers

Mazdaspeed 3/Mazda 3 Winter Wheels and Tires Hey all, I recently sold my MS3 and am looking to clean out my basement. I have a set of four winter wheels and tires. They have a total of 4 weeks of use over the past two years (travelled to CT and back for holidays each year). I have driven them in one storm, when we got 6 inches. They're amazing, I don't believe that you can get stuck with these on your car. 16" black steel wheels from Tire Rack with TPMS sensors Bridgestone Blizzaks WS70 215/60R16 have 95% tread left I paid $823.96 for this setup, and barely used it while I had my MS3. Would prefer local pickup, but I will help buyer to arrange shipping if necessary. List Date: 10/9/2014 Location: Clemson, SC, United States For...

Mazdaspeed Protege 2003.5 ECU for sale I have this Mazdaspeed Protege ECU for a while is almost new and completely fuctional, have it for SALE at 200 shipped if any is interested please PM. The serial number is MJJ9: MSP0-18881-A. I can send photos.

Forge BPV V2 (black) & enkei wheels fs or trade.. sup, I'm selling a forge bpv v2 w/ 2 shims & red, blue spring and the green spring already installed. I used it for 2 month, then moved on to a cobb xle. it worked perfectly, no problems... i just cleaned and grease it with valvoline synthetic. i'm open to trades ... i also have some 18x7.5 wheels, enkei m3 in a smoked metalic 5x114.3 et45 I'm looking for some gen2 wheels. let me know.... message me or you can reach me via text (301)906-1044 peace List Date: 11/10/2013 For more info, click here to view the original listing: Forge BPV V2 (black) & enkei wheels fs or trade.. -------------------------------------- On Sale For: $87.78 + $8 Shipping...

Bunch of extra parts left over from my recent rebuild. All prices include shipping to the continental US. Sorry Canadians, HI, AK, PR, etc. not shipping to you guys right now. Please PM to confirm availability and arrange sale. I take paypal or cash pickups. Will update as things are added/sold 3 ft -6 an SOLD http://i351.photobucket.com/albums/q443/circuitP5/For%20Sale/2014/PhotoAug1743206PM_zps3fdd1c8f.jpg 2ft -10 an SOLD http://i351.photobucket.com/albums/q443/circuitP5/For%20Sale/2014/PhotoAug1743227PM_zpse0be18ec.jpg 2x 12" SPAL fans SOLD http://i351.photobucket.com/albums/q443/circuitP5/For%20Sale/2014/PhotoAug1743552PM_zpsa07a802c.jpg Mazdaspeed flywheel SOLD Has part broken off one of the dowel pins. I received it like...

Items I have for sale. All prices are shipped in the US. -GT Spec trunk cage - Sold -GT Spec V brace (without center) has wear from the lateral arms hitting it, but not bent - Sold -A pillar dual gauge pod - $30 -Plastic timing covers - $40 -Mazdaspeed heatshield - Sold -2 MSP OEM intercoolers - $50 Sold -Mazdaspeed plastic valve cover (needs a new emblem) - $40 -Tokico struts with tokico springs (less than 10k miles on them) - Sold

Just replaced the entire exhaust system with aftermarket. Selling the manifold, downpipe, and catback. I'll post pics when I get home. $50 each for manifold and downpipe and $100 for the catback. If you want pics you can also text me at 252-622-5344. Very flexible on the price. Just trying to get it out of the garage. Exhaust manifold $25ATTACH]209008[/ATTACH] Downpipe $25 Stock catback exhaust $75

FS: Mazdaspeed6 part out! Car died, bought a new 6. Prices may be negotiated. Shipping inlcluded unless otherwise noted. Tenzo Cuzco 18x7.5" Wheels With Tires - $800 (shipping extra, pickup preferred) - Wheels are flat black - Two wheels have small curb rash on spoke (pictured) not noticable - Tires are 225/40/18 Nitto Motivo AS. Brand new, 1k miles! Quiet with good grip SU cf grille - SOLD! Sure SRI - $100 - MAF housing and filter are from different intake but fits, brand new PG turbo inlet pipe - SOLD! Catless downpipe - SOLD! - includes v-band adapter and gasket Stock tmic - $50 Stock bpv - $25 Magnaflow CBE - SOLD! Stock smokey turbo - $50 TWM gunmetal shift knob - $50 (mint) Cobb EBCS - $75 (BNIB) TS boost lines and...

fs magnaflow catback about 2 yrs old on my car $200 obx header 3 months old. $100 i perfer local buyer but willing to ship if buyer pay for shipping. both items are still on my car, will take it off and take a pic before i send out to buyer.

Hello everyone. Engine started knocking and Rocky's Miatomotive said the engine needs to be replaced. Really hate to sell but life's too busy. One owner, title, with ~180k miles on the chassis and motor. All the mods are included in the description below. Some dings and scratches. Everything works except the motor. It moves, but will need to be towed. Asking $2000. Just offer, I'm cool to deal with. (619) 746-4zero9zero. Call or text. Location San Diego. Currently non-op with no fees from the DMV. Ready to sign over ASAP. Mods: Injen Intake MSP Front Lip Bi-Xenon Morimoto Mini H1 Projectors Denso Ballasts HKS Axle Back Exhaust w/silencer Yellowspeed Coilovers Rear Racing Beat Sway Bar Megan Rear Trailing Arms Energy Suspension F+R...

Carbing Front Strut Bar Carbing single piece front strut bar. Needs repaint, rare piece no longer made for the MSP, MP3, P5 & sedan Protege. price reflects shipping within the cont. US. shipping to Canada extra. List Date: 10/8/2014 For more info, click here to view the original listing: Carbing Front Strut Bar -------------------------------------- On Sale For: $156.09 --------------------------------------