Mazdas247 Marketplace

Price Drop, last bump. Make offers on this stuff If you're interested in multiple items we can work out package prices. Sold the MSP so clearing stuff out of the garage. Will ship on your dime. I only accept PayPal. I'm located in Holly Springs, Cherokee County, North Georgia. Fastest way to reach me is email: sever_nx@hotmail.com I'll try to check and update this thread. 1. SOLD 2. SOLD 3. TEIN S-tech springs. Took them off before I sold the car. No idea on miles but in good shape. Little dirty from sitting in the garage. $140 Shipped 4. SOLD 5. OEM MSP Intercooler. In good condition. $25 6. OEM MSP Airbox/Intake pipe. In good condition. $25 7. SOLD 8. SOLD

Hey guys. I was reorganizing my shop today and came across a few things from the blazing yellow msp part out i did a couple years back and thought id see if anyone was in need of these parts. And to be clear here, if you dont see it pictured i dont have it. What you see is what ive got. Paypal only, prices include shipping in the CONUS only please, unless its a local pick up. First person to post up "ill take it" with corresponding number gets it. 1) Custom painted dash bezel. Metallic graphite. Matchs CF perfect. Sold 2) blazing yellow hood, excellent condition. $75 picked up 3) mazdaspeed drivers floor mat. Fair condition Sold 4) air bag Sold 5) crome rad brackets $20 6) motor mount $20 7) drive window bezelSold 8) rear door knobs...

Hi I was lucky enough to get a bunch of PAR gears a little while back and got to use some, but some have just been collecting dust, and that's such a shame. These are the old Tri Point set made for high acceleration with ratios of 1.540 for 3rd and 1.227 for 4th. Actually I have 4 sets of 3rd helical cut, 4 sets of 4th helical cut and 2 sets of straight cut. They are all unused and the straight cut ones are even in their original plastic. As far as I know these are for roller bearings, but you need to source them for yourselves except for some 3rd roller bearings that I will ship with. (I have 3 of them) After some research I found out on this forum that the roller bearing ones can be used on the stock shafts but there will be quite a...

FS: 1.8BP Custom Made ITB Setup This is a custom made setup I created for my previous car (03 MSP with 1.8BP swap). I got the car running on this manifold when I first did the 1.8bp swap into my 2003 MSP and was running n/a, however I never got around to building a proper plenum or finishing this setup "nicely". The setup is not complete and will require several hours of tinkering to make it safe/reliabile enough to use daily. What I am selling: -custom aluminium 1.8 BP Intake manifold flange with ported runners welded on specifically for these GSXR Individual Throttle Bodies. -4 GSXR throttle bodies -8 t bolt clamps -4 silicone couplings cut to fit (these connect the runners to the ITBs) -GSXR TPS - Needed for...

Hey all, I've been going through a bunch of stuff I have above the garage and I've found a lot of things you might like to have. Hopefully my spring cleaning = Your summer/spring project! Also, I am moving across the country from Rome, GA to Portland, OR, so you can meet me along the way if you don't want to pay for shipping. You will need to pay the actual shipping costs, so please include that in your figures. Paypal: nshootz AT hotmail I am open to package deals, now that my move is TOMORROW (4/14)... items that have been sold will be marked SOLD and no longer bold H4 Bi-Xenon HID headlights (5000k) and harness & ballast (35W) (plugs right into your existing H4 connector) - $20 H7 HID's (3200k) - make an offer Protege...

GI: mazdaspeed proteg front bumper - sunlight silver metallic no longer available.

I'v got a pair of door sills I never put on my car. Not perfect but not junk $50 plus shipping

2003 Mazdaspeed Protege 03.5 **CONTACT** Norman Call or TXT 571-839-5595 email: role.model@hotmail.com 2003 MAZDASPEED PROTEGE 03.5 (Laser Blue) CLEAN/CLEAR TITLE MILAGE: LNNBSSNE$4545D45$4)I%9H%9i11%!P]%!P1U5%9U41e]!04) 1UQ adMQ5$4)QUI <MQ= ,PU10 =I-MA=IP5%MQU@\QUI =M5IP =X\ =1%H%9Q-,8%H%1QH4)Y UU45i%9Q-59%=14)QU9%9U9% !%@A1UA1d9%95959PMeMQ44)U0)eLI %9U0I%04(]1 =I<U0AU5@4(I=5=Q%YU0AIMMUIIU1Q=H4(8MQ1 I%U01%9L4(4)=%QL9=PMe9Q!Q%4)a!UMPMQ= ,a!UMP59%=14(U10A%A%9=]9A%A4( =Q P1QL4(591=\5U1H4)MUMA9M%=8MQ= ,Q=-% < 1UMQIUQL\%  4(1=]I%9MAI%9L4(PMAIHQIU9, 91=]HX I 4(MQ=...

Hey guys, I have almost all the parts of a Mazda protege 2003 LX 2.0 to sell. Just send me a msg via hotmail with the part you want and the price you would like. I will send you pictures back and we will be able to set up the perfect price. Manual 5 gear Thanks! I live in the southshore of montreal, QC Hotmail: johnny.goulet@hotmail.fr

I'm from Taiwan and my girlfriend is from Japan, and we owned a P5 when we were in Japan, but now we live in the U.S. I miss that car, couldnt find anything trustworthy on Craigslist (met up with one seller, car had some water damage but he kept claiming it was fine, and I asked him to show his ID to make sure the title is under his name then he starts saying "oh it's my daughter's car actually ill call her blah blah blah" but she never showed up...) Wondering any P5 owners here are letting go their awesome hatch please let me know! I am new to the ZoomZoom247 site I'm not sure if I'm allow to post this actually but if I'm not supposed to please let me know also will remove.

Black MSP Interior, dash, console, carpets, door panels, seat belts in NY Black Dash, Console, Door Panels, Carpet, Seat Belts, MSP door sills, MSP Floor Mats, e-brake handle and all black pastic trim. $350 obo picked up in NY 12528 Cluster, Steering wheel, shift boot/cup holders, HVAC controls, silver trimmed window switches and interior door handles not included but can be negotiated. 109k mile cluster $150 shipped in the continental US Steering wheel $200 shipped Pedals complete $150 obo pass side air bag $50 Clockspring $50 shipped Side skirts $125 http://s163.photobucket.com/user/Georonim0/library/MSP

Have a MSP starter kit for all you non-turbo proteges. It consists of OEM manifold (no cracks) , turbo, S pipe, and J pipe. If you need the MSP ECU I have that as well. Turbo has no shaft play, spins freely and has 80K miles. Turbo kit= SOLD. MSP ECU=$80 shipped in the US. Paypal ONLY. Feel free to make offers

1994 mazda protege rally cross Hello, selling a 1994 mazda protege LX 1.8dohc. runs in prepared class under SCCA rally cross rules. Car is well equiped and very competitive. MODS: mazdaspeed LSD added with new 28 spline axles(cost 1200$ to modify transmission and add new axles) stage 3 clutch and pressure plate, new bearings. D2 gravel rally coilovers 55mm, 36 way adjuatable, complete with top mounts, (3 events ive used them)(retail for 2500$) headers and full custom exhaust front to back intake cam race seats 255 waaboro fuel pump rx vaf not installed rally tires on 14 inch wheels( 60% tread left) New corksport linkage bushings, new mounts, new rotors new timing belt and water pump, ac delete, (all components removed except fan)...

Up for sale is my GREEN 1.3bar Mazdaspeed radiator cap. It is in excellent condition and still seals perfectly. I've added a close-up and well-lit picture of the sealing surface for verification. I'd like to get $50 shipped for this. Thanks for looking!

Mazda CX-9 New Car Cover New OEM cover with Mazda logo on the hood. The number on the box is 0000 8J N05 Will take best offer as this car has been sold and I no longer have any use. Thank you List Date: 10/8/2014 For more info, click here to view the original listing: Mazda CX-9 New Car Cover -------------------------------------- On Sale For: $135.38 --------------------------------------

Up for sale is a single din Kenwood KDC-H0942U unit with everything needed to install. had the unit when I bought the car had no problems with the unit I just recently upgraded to a double din that was a birthday gift. Asking for $80 shipped obo some brand new SU radiator brackets SOLD Recently did a retrofit on my headlights and had extra pieces left over. Brand new E55-R and mini Graphite shrouds with extra mini h1 projector bowls and hardware (does not come with lenses). Sold

Koni FSD Struts/Shocks with MS3 springs Hi All, Selling an assembled set of Koni FSD with Mazdaspeed3 springs with 20k miles - $325 plus shipping. Thanks! List Date: 6/8/2013 For more info, click here to view the original listing: Koni FSD Struts/Shocks with MS3 springs -------------------------------------- On Sale For: $325 + $40 Shipping --------------------------------------

Mazdaspeed 2003.5 Parts I have a few random parts that were laying around so I decided to sell. I may be new here but I can guarantee a fast and good transaction, I'm not here to rip anyone off.. I have the stock air box for the 2003.5 - $30 basically new Denso ignition coils - $50 Makeshift CAI (Fits stock turbo inlet) With clamps & 2 week used air filter - $25 fully functioning TPS Sensor, bought new one because I thought it was the cause to a problem ended up not being the cause tried to return it, they wouldn't take it so now I'm selling, comes with orig box. - $50 Front bumper scrape guard - $10 and random 2.5 inch aluminum piping and a MAF sensor housing. - $15 PM or Reply to thread. CAI Airbox Igntion coils and TPS...

Enkei PF01 17x8 5x114.3 +50 Enkei PF01 Black Part # 460-780-6550BK 17x8 5x114.3 bolt pattern +50 offset Center caps included Weight 16.9 lbs 3 are still in box, 1 was just shown for images. NEVER BEEN INSTALLED! Those are the original pictures that where used when I bought the wheels. But since they've never been installed you'll get them just as you see in the pictures. Asking $820 (Tire Rack has them for $279 each) Local sale only (at least for now) List Date: 4/10/2015 Location: Montclair, CA, United States For more info, click here to view the original listing: Enkei PF01 17x8 5x114.3 +50 -------------------------------------- On Sale For: $820.00 (Local Pickup Only) --------------------------------------

MSP is gone. Here are some of my extra parts: OEM MSP clutch & alignment tool, approx 50k miles: $15 MSP front seat covers(driver and passenger), removed from OEM seats, orange stitching: SOLD Sparco shift knob, OEM MSP shift lever & boot: $80 for 3pc set SOLD OEM front sway bar bushings, sealed: $10 for the pair SOLD Sparco pedal set w/ hardware, Unused OEM: SOLD OEM A-pillar: $15 OEM plastic charge pipe x2, one is near perfect other has surface scratches/ scuffing: $25 for better $15 for scuffed. Foglights, no brackets: $50ea. Combo switches: $10 MAF sensor, has crack on plug connector but pulled from working car: SOLD Magnecore wires, lots of mile, but still good: SOLD Fuel door ( Black Mica) and fuel door/trunk release...