Mazdas247 Marketplace

I was going to turbo charge by P5 but never did so I am selling my forged internals. these were never installed and are still in their original packaging as pictured. If you are looking to make power and don't want to worry about your engine, this is the way to go. Crower Rods: the strongest yet lightest rods available. While other manufacturers are cutting corners, Crower incorporates only the finest aircraft quality steel. Every contour is designed to enhance overall strength and reliability at high engine rpm. Crower connecting rods incorporate an I-beam design that eliminates pockets of excess material and delivers exceptional longitudinal and horizontal strength. The cap screw design assures true roundness and a positive...

So, the time has come. Here's a dump of pretty much all the performance parts I have, with some pretty desirable OEM parts too (roof rack, package tray, timing belt kit, etc). I may be adding a few more items, and eventually I will be parting out everything in the car. Most prices should be close to market value and unless otherwise noted, the price includes shipping to locations in the USA. I've also grouped some items with a purchase price that is lower for those interested. PMs are a better way to contact me than posting on the thread. Paypal only, please. I'm not really doing dibs unless someone has made a pretty clear commitment to buy a part. If you make me an offer and I respond with my paypal address, I reserve the right...

Has a bad head gasket and I am tired of looking at it. Plenty of good parts. It will be going to the bone yard by the end of the day. Parts are OBO! Shipping will be likely USPS Priority shipping out of Omaha, NE. Paypal only.

I have a spicyorangemsp flashed Mp3 ecu. Confirmed by him. Excellent plug and play for any non turbo 2.0 protege from 01-03.(maybe more you'll have to search.) smoother power band and a little more pep in the Protege. Price- sold and shipped Transmission from 2002 protege es- 5speed, 2.0L- 180k miles 130.00 picked up Transmission from 2003 protege 5-5speed,2.0L- 96kmiles 150.00 picked up

Unfortunately I don't have the space in the Driveway for this car anymore. It is in pristine condition and has all options except for navigation. Details are: 130,000 Miles Rota P-1 18x8 Charcoal Wheels Corksport LED Tail Lights Cobb Accessport V2 Corksport 80mm exhaust Corksport Downpipe Sure Aeros Intake CPE Turbo Inlet Pipe SU Rear Motor Mount Upgraded high pressure fuel pump with KMD Internals SURE DREADNAUGHT and JUGGERNAUGHT Rear differential mounts WHITELINE rear sway bar JBR EGR DELETE SPC BALL JOINTS BNOON BOLT Brand New OE Clutch, and replaced the Rear main seal while the transmission was out Timing Chain and VVT Actuator replaced at 127K New Rear Brakes Pictures can be found here...

For sale is 2003 MSP. it has 152k on the cluster and 100k on the swap. recent work includes water pump, timing belt, brakes, rotors, front control arms, and oil change. run and drives great. $3299 or best reasonable offer. located in MA.

As of now i am only selling the body panels and interior. Mazdaspeed Protege seats (mint), mats, spoiler, side, racing hart rims (soon), pedals, located in MA. won't ship anything large. prefer local pickup. Please inquire! admin, i know i don't gave the proper sig, but please bear with me, i will get it soon.

Hi There, Selling my used set. They were taken off at 6,000mi. Still quite a lot of tread left. No use for them since I now have a CX-5. asking $200 local pickup Thanks Rich

Moving to Spain next week and I need to get rid rather than throw away. I bought a month ago and couldn't dedicate my time to install and taking it to a tuner as I expected. I paid $275 for it and I'll let go for $220 shipped. I comes with the SSAFC, PC cable, instructions, CD with software and maps.

I have a Split Second PSC1 with the data logging capabilities. Will come with v1.50 of the R4 software and a serial to USB cable. $325 shipped. https://www.dropbox.com/s/31okdvj6g29d5u6/IMG_20140820_151526.jpg https://www.dropbox.com/s/cuyh4tqcc0v5r1s/IMG_20140820_151534.jpg

Updated with better photos and a lower price. Any interest?! I want to make sure it ends up with someone who really appreciates these vehicles. Unfortunately, I have to let go of my Mazdaspeed6. This car is in pristine condition. I purchased it from the original owner 6 months ago. I just got a new job with a longer commute and I do not want to rack up the mileage on this awesome car. It has been strictly serviced by Mazda (I have all service records dating back to 2006; including oil changes). Please feel free to give me a call with any questions. I am definitely looking to find it a good home. Car is located in Catonsville, MD. Asking $10,500. Link to photos: https://goo.gl/photos/1QZomYbmrpCMaQFu5 Jesse 443-840-9110

FS: OEM 16inch 5 Spoke wheels w/ tires*updated* Selling 16 inch 5 spoke wheels. No TPMS Tires - Firestone Firehalk gt 205/55R16 Tires have a little life left in them Wheels have some minor curb rash on each. Asking $200 or best offer I need these gone by the end of this month. Local pickup only. South/central NJ/Philadelphia area. http://imageshack.com/a/img921/640/IWJnmu.jpg http://imageshack.com/a/img922/5742/yLgW2E.jpg http://imageshack.com/a/img924/2905/q7TSZK.jpg http://imageshack.com/a/img924/4021/lg3p9B.jpg http://imageshack.com/a/img924/6945/Udk9M2.jpg

$200 obo pickup, shipping extra Sold the car so I'm selling all my stuff from it. 15x6 steel wheels with +41mm offset and two bolt patterns: 5x114.3 and 5x108. The wheels are 10 years old but they are still solid, just not the best looking. Tires are Hankook Winter iPike 205/60-15 and have plenty of tread left on them. They will last about 2-3 more seasons.

CLEAN! Black leather seat set for 2003 (era) Protege5. Bought these for my son's new car not realizing that he had the SRS (side air bags). I'm not willing to sacrifice safety for leather. I'd do a trade plus cash for set with side airbags or i'd take 350obo plus shipping on this set. I accept paypal: brandon.oneill@gmail.com 209 Positive seller feedback on the BMX Museum under Brandonio

Lots of parts available, please read the "*****" before any inquiries. My P5 has finally met up with her slow rusty death and now it is time to get rid of her. NOW TAKING OFFERS ON EVERYTHING, JUST ASK The worst I can say is no.. *****For fastest responses, please email me directly at scwallace19@gmail.com, and leave Protege5 Parts in the subject box. *****All body panels have been sold except for front driver/passenger doors and rear passenger door, side skirts, and fenders. *****BUYER PAYS SHIPPING, unfortunately there's no such thing as free shipping, so please don't ask. *****Have most of everything boxed up and have a postal scale, so I can give accurate shipping quotes. *****My Paypal email is scwallace19@gmail.com...

Hi all, both of my key fob ring loops broke a few years after buying my protege5, and since I have a 3d printer I decided to do some fairly extensive design work to model up some replacements. I currently have yellow, red, black, and green plastic I can print fobs with. I could get other colors if demand was high enough. I've had one of these on my keychain for several months now with no problems. Two notes: these are likely not water resistant (not sure if the original was either), and as you can see in the pic are not geometrically identical to the original fob. Again, I've had one of these on my key chain for 5 months now with no problems. My car is a Protege5, but these should work for any car that uses the 41846 and 41704 fob...

Moving sale! I am in CO but moving to MD/DC. I can potentially bring these with me on the moving truck. Factory rims. 17x7jj. ET60. Great condition, some very light curb rash but no dings, damaged beads, or anything that would inhibit safety or performance. I don't believe these are exact CX-5 rims, but the only difference is these are ET60 and factory is ET50. The 10mm difference has no noticeable effect on the car whatsoever. I ran them last winter long beautifully. Mounted with a set of 225/65R17 WS-80 Blizzaks. Approximately 3500 miles on the tires. Tires are similarly in excellent condition - no bubbles, repairs, or any damage. Looking to get $575 for the set. Local pickup in Denver/Boulder area preferred. I am open to...

Have a Erebuni-style wing that i purchased brand new off of Jperera's GB. Bought for $300 USD shipped, willing to let it go for $200 CAD Shipped ($150 USD) You will have to drill holes and put your own 3rd brake light. Has never been mounted. Pics: Thanks, Michael

2002 protege5 yellow body 2.0 engine 5 speed located 37312 (cleveland,tn) jay- [removed] text/call either slung rod or main bearing is out. cranks and runs, but quite a knock. oil pump fried and starved it, at least thats my diagnosis. everything else is good parts. may part out on the cheap as well, depends on offers. pics available by text and ill get some up on site asap. 3 very good tires/1 is 25%. everything else is in fine working order.

Ok, time has come for me to move and I MUST sell Everything!!! Still have a bunch of parts left. Make me an offer on anything you might be interested in. Like I said, everything HAS to go. full front cradle/subframe assembly, all parts included engine block clutch and flywheel Wiring Engine Harness Corksport 80mm exhaust with cat/resonator delete sold Set of 4 cross drilled rotor, pads, and calipers $220 sold 4 tokico blues struts (sold) whole MSP interior Sold fenders rear bumper hood coil packs fuel rail with injectors attached MSP pedals Sold Headlights sold MSP ECU sold tranny $200sold AWR mounts Sold tail lights Spoiler SOLD Rear lip SOLD Kartboy Short shifter sold E-brake handle sold MSP speedometer (sold) Side Mirrors set...