Marketplace

SOLD. Genuine OEM Mazda by Enkei for Racing Hart wheel set (4). No repair work. Professionally refinished (powdercoated). new valve stems, new tires 205/45/17 these are 5X114.3 17X7 et55 64.1 cb Not fitted since refinishing. You collect in SoCal 92118. 1500$ cash-n-carry. (no center caps -sorry). pics of actual offered wheels/tires. stored indoors. thank you.

I'm starting to part out one of my Mazdaspeed Protege's due to frame Rot. Right now I have up for sale: Fog Light Deletes: $120.00 shipped, good condition no broken clips. (SOLD) SSAFC: $100 shipped, non-data logging version Superstock Map Loaded. I have the software on my google drive that I can share with the buyer.

Brand new factory sealed set of 2018 OEM Mazda floor mats. Full set of 4 for the Mazda CX5 second generation. $60. Buyer pays shipping.

All 8 pads from my 2023 CX-5 Turbo. The fronts will also fit the CX-9. I am unsure if the rears will. Pads are in great condition. Barely used! About 3,500 miles. If your pads are running down and you're looking to replace them, here's a way to save some bucks and get the same Mazda pads. Supplementary information: my car's mileage as of today. I changed out the pads ~200 miles ago. I can try to get thiccness measurements if requested, but I couldn't manage to hold the tape measure and camera at the same time. Hopefully these pictures tell the story. I can include all of the metal clips if you need them (not pictured). $50 shipped anywhere in the continental U.S. PayPal accepted.

Putting up my KL swapped Protege5 for sale. I have a build thread chronicling the swap itself here: https://mazdas247.com/forum/t/kl-swappin-protege5.123871539/ Car and I am located in the Detroit Metro area in Michigan. I bought this car after writing my last (second) Protege5 off in KY in July 2019. The car was previously in a front end accident, but this hasn't affected the alignment. I pulled my core support and crash bar off my old Pro5 and intend on that going with the car. The paint isn't in great shape; it's been resprayed, but mechanically it's sorted. I have swapped over the following parts from my second Protege5: Suspension: -Tokico Illumina struts/ Eibach Sport Springs -AWR 21mm RSB with adjustable endlinks, new rod ends...

My P5 was recently totaled, so the few parts I have left are here to sell! PART PRICE (ALL ARE OBO, SHIPPING NOT INCLUDED) Valve Cover (painted with high-temp paint) $40 Intake Manifold Upper-Half (missing VICS valves) $25 Intake Manifold Upper-Half (has all VICS/VTCS valves) $30 Racing Beat Rear Swaybar $60 OEM Foglights w/hardware $70 Protege5 OEM ECU $80 Gasket For Stock Exhaust System $20 Exhaust Manifold Heat Shield (painted with high-temp paint) $30 OEM Air Intake System $50 Rear Strut Tower Bar $40 Cut Seatbelt Mounts $20 Protege5 OEM Springs $80 Fuel Sending Unit + Fuel Pump + Sock Filter $40 Beck/Arnley Fuel Sending Unit (individual) $20 Premium (brand) Fuel Pump (individual)...

Morning, I owned a Mazda CX5 2.2 Diesel from 2016 (bought new) until Sept 23, I did all the servicing myself and it proved a fantastic car. Spending the kids inheritance I recently changed to a 2024 CX5e 2.5 petrol. When I sold the diesel CX5 it had covered 54K miles and I had bought 6 Litres of FZ ATF in preparation for a gearbox fluid change, 5 litres of HJC F22 special antifreeze and a One litre can Mazda Long Life Hypoid Gear oil SG1. As these lubricants will not now be required anyone want to buy them at a big discount? All brand new unopened containers. Located Bury St Edmunds area.

Used ROLA 59912 Kayak J Style Carrier. Robust load capacity-perfect for sit-on-tops, singles, tandems or whatever your "yak" of choice High strength powder coated steel construction Foam pads cradle and protect your watercraft during transport Universal hardware works with ROLA and most other crossbars Premium heavy-duty straps and bow/stern tie-downs included Pick up near Raleigh NC or ship.

Full navigation SD card which gets inserted into center console

This is a genuine Mazda part #KB7WV1350. The cover was used for about a year and it is in mint condition. Pick up near Raleigh NC or ship.

P5 Autoexe intake with brackets. 240$ shipped. Box up ready to go.Paypal g&s. Or pick up in cali. 200$

Items are brand new, never installed. Price does not include shipping. Jay Racing Thermal Spacer - $50 SCE Copper T25 Gasket - $25

Selling 2.0L ABS manual engine harness. No cuts or burnt connectors. $250 + shipping.

I thought I'd sold all of my old parts... I guess not! These still rebound just like I remember, good to go. They also come with stock sway bar end links. Hit me with a message/PM with your interest and offer. Thanks! I'm in Colorado Springs, 80907. Happy to ship to you, you pay. Video of the shocks rebounding: New video by Nick Schuetze

Two brand new, in box, never used Timken rear wheel bearings - HA590193. $90 ea inc shipping. Sold the car prior to installing. I believe they only fit a CX-7. Literally no other cars... anywhere.

Intake manifold with vtcs delete/Vics still intact Powdercoated upper half red 75 OEM MSP intake tube/ no cracks/great shape 60 OEM Callaway turbo manifold/heat shield no cracks with por15 coating 80 OEM Callaway S downpipe pipe great shape 60 Ghl 3in downpipe with divorced ports, heat wrapped with rust on flex pipe welds 160 Used Pauter billet connecting rods for Mazda FS motor in excellent shape/machine shop verified 450 also interested in trades for quality brand coilovers in excellent shape.. Located in central Florida Willing to ship.. west coast add an additional 30

For sale located in franklinville New Jersey...freshly powder coated 20 inch wheels..like new...asking $400 OBO Email or message me

2018 Mazda3 Touring Located in Denver, Colorado Less than 47,000 miles on the odometer. Bose stereo, power moonroof, black pleather seats, Apple carplay, Bluetooth This car is from a non smoking home with no pets, no kids. The car is in very good condition, but not perfect. The car has had no mechanical issues, one owner, clean title. There is some regular wear from use showing, a few minor dings and scratches, but nothing you would notice from a distance. I'm flexible on terms, willing to listen to reasonable offers. Please feel free to contact me with questions, etc. I also have hardcopy service/maintenance records year by year. Selling it as is Thanks for looking!!

Hi All, For sale is a huge pile of mostly OEM new old stock parts for Mazda 5 and Mazda 3 cars. I sold my car and have this sitting in my basement. Would like to sell as a group. 400$ shipped to your door by UPS ground in continental US. Payment by PayPal good and services. Located in CT if local pickup. For local pick up I also have core oem parts from Mazda 5 if needed - axles and front strut and springs assemblies. Thank you! Here is a description of parts: 3x quart bottles of OEM M5 Transmission fluid 0000-77-112E-01 2x carquest oil filters R85348MP 2x Timken front wheel bearings WB000028 2x Timken retention rings for front wheel bearings RET166 1x OEM lug nut D651-33-042A 1 each of transmission pan gasket: fuel-pro...

Hello - I just purchased a certified pre-owned Mazda CX9 from a Mazda dealer on December 22. The car was used as the loaner / courtesy vehicle prior to my ownership. I am looking to sell the existing tires on the car so I can swap them out for a set of dedicated winter tires. These tires are the original equipment tires for 2016 - 2023 Mazda CX-9 (for those models with 20" rims). The car currently has ~6,900 miles. So I believe the remaining life of the tires is good for at least 25,000 miles, based on reviews from Tire Rack. Discount Tire / Walmart sells each tire ranging from ~$239 to $294. I'm looking to sell all four tires for $300 (Buy 4 get 1 free) or best offer. I can only be certain that these tires fit Mazda CX9 equipped...